On PowerPC, when CPUs enter certain deep idle states, the local timers stop and the time base could go out of sync with the rest of the cores in the system.
This patchset adds support to wake up CPUs in such idle states by broadcasting IPIs to them at their next timer events using the tick broadcast framework in the Linux kernel. We refer to these IPIs as the tick broadcast IPIs in this patchset. However the tick broadcast framework as it exists today makes use of an external clock device to wakeup CPUs in such idle states. But not all implementations of PowerPC provides such an external clock device. Hence Patch[6/8]: [time/cpuidle: Support in tick broadcast framework for archs without external clock device] adds support in the tick broadcast framework for such use cases by queuing a hrtimer on one of the CPUs which is meant to handle the wakeup of CPUs in deep idle states. This patch was posted separately at: https://lkml.org/lkml/2013/12/12/687. Patches 1-3 adds support in powerpc to hook onto the tick broadcast framework. The patchset also includes support for resyncing of time base with the rest of the cores in the system and context management for fast sleep. PATCH[4/8] and PATCH[5/8] address these issues. With the required support for deep idle states thus in place, the patchset adds "Fast-Sleep" idle state into cpuidle (Patches 7 and 8). "Fast-Sleep" is a deep idle state on Power8 in which the above mentioned challenges exist. Fast-Sleep can yield us significantly more power savings than the idle states that we have in cpuidle so far. This patchset is based on mainline commit-id:8ae516aa8b8161254d3, and the cpuidle driver for powernv posted by Deepthi Dharwar: https://lkml.org/lkml/2014/1/14/172 Changes in V5: ------------- The primary change in this version is in Patch[6/8]. As per the discussions in V4 posting of this patchset, it was decided to refine handling the wakeup of CPUs in fast-sleep by doing the following: 1. In V4, a polling mechanism was used by the CPU handling broadcast to find out the time of next wakeup of the CPUs in deep idle states. V5 avoids polling by a way described under PATCH[6/8] in this patchset. 2. The mechanism of broadcast handling of CPUs in deep idle in the absence of an external wakeup device should be generic and not arch specific code. Hence in this version this functionality has been integrated into the tick broadcast framework in the kernel unlike before where it was handled in powerpc specific code. 3. It was suggested that the "broadcast cpu" can be the time keeping cpu itself. However this has challenges of its own: a. The time keeping cpu need not exist when all cpus are idle. Hence there are phases in time when time keeping cpu is absent. But for the use case that this patchset is trying to address we rely on the presence of a broadcast cpu all the time. b. The nomination and un-assignment of the time keeping cpu is not protected by a lock today and need not be as well since such is its use case in the kernel. However we would need locks if we double up the time keeping cpu as the broadcast cpu. Hence the broadcast cpu is independent of the time-keeping cpu. However PATCH[6/8] proposes a simpler solution to pick a broadcast cpu in this version. Changes in V4: ------------- https://lkml.org/lkml/2013/11/29/97 1. Add Fast Sleep CPU idle state on PowerNV. 2. Add the required context management for Fast Sleep and the call to OPAL to synchronize time base after wakeup from fast sleep. 4. Add parsing of CPU idle states from the device tree to populate the cpuidle state table. 5. Rename ambiguous functions in the code around waking up of CPUs from fast sleep. 6. Fixed a bug in re-programming of the hrtimer that is queued to wakeup the CPUs in fast sleep and modified Changelogs. 7. Added the ARCH_HAS_TICK_BROADCAST option. This signifies that we have a arch specific function to perform broadcast. Changes in V3: ------------- http://thread.gmane.org/gmane.linux.power-management.general/38113 1. Fix the way in which a broadcast ipi is handled on the idling cpus. Timer handling on a broadcast ipi is being done now without missing out any timer stats generation. 2. Fix a bug in the programming of the hrtimer meant to do broadcast. Program it to trigger at the earlier of a "broadcast period", and the next wakeup event. By introducing the "broadcast period" as the maximum period after which the broadcast hrtimer can fire, we ensure that we do not miss wakeups in corner cases. 3. On hotplug of a broadcast cpu, trigger the hrtimer meant to do broadcast to fire immediately on the new broadcast cpu. This will ensure we do not miss doing a broadcast pending in the nearest future. 4. Change the type of allocation from GFP_KERNEL to GFP_NOWAIT while initializing bc_hrtimer since we are in an atomic context and cannot sleep. 5. Use the broadcast ipi to wakeup the newly nominated broadcast cpu on hotplug of the old instead of smp_call_function_single(). This is because we are interrupt disabled at this point and should not be using smp_call_function_single or its children in this context to send an ipi. 6. Move GENERIC_CLOCKEVENTS_BROADCAST to arch/powerpc/Kconfig. 7. Fix coding style issues. Changes in V2: ------------- https://lkml.org/lkml/2013/8/14/239 1. Dynamically pick a broadcast CPU, instead of having a dedicated one. 2. Remove the constraint of having to disable tickless idle on the broadcast CPU by queueing a hrtimer dedicated to do broadcast. V1 posting: https://lkml.org/lkml/2013/7/25/740. 1. Added the infrastructure to wakeup CPUs in deep idle states in which the local timers stop. --- Preeti U Murthy (4): cpuidle/ppc: Split timer_interrupt() into timer handling and interrupt handling routines time/cpuidle: Support in tick broadcast framework in the absence of external clock device cpuidle/powernv: Add "Fast-Sleep" CPU idle state cpuidle/powernv: Parse device tree to setup idle states Srivatsa S. Bhat (2): powerpc: Free up the slot of PPC_MSG_CALL_FUNC_SINGLE IPI message powerpc: Implement tick broadcast IPI as a fixed IPI message Vaidyanathan Srinivasan (2): powernv/cpuidle: Add context management for Fast Sleep powermgt: Add OPAL call to resync timebase on wakeup arch/powerpc/Kconfig | 2 arch/powerpc/include/asm/opal.h | 2 arch/powerpc/include/asm/processor.h | 1 arch/powerpc/include/asm/smp.h | 2 arch/powerpc/include/asm/time.h | 1 arch/powerpc/kernel/exceptions-64s.S | 10 + arch/powerpc/kernel/idle_power7.S | 90 +++++++++-- arch/powerpc/kernel/smp.c | 23 ++- arch/powerpc/kernel/time.c | 80 ++++++---- arch/powerpc/platforms/cell/interrupt.c | 2 arch/powerpc/platforms/powernv/opal-wrappers.S | 1 arch/powerpc/platforms/ps3/smp.c | 2 drivers/cpuidle/cpuidle-powernv.c | 106 ++++++++++++- include/linux/clockchips.h | 4 - kernel/time/clockevents.c | 9 + kernel/time/tick-broadcast.c | 192 ++++++++++++++++++++++-- kernel/time/tick-internal.h | 8 + 17 files changed, 434 insertions(+), 101 deletions(-) -- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/