On Monday, 27. January 2014 19:46:13 Luis Ortega wrote:
> A frame is a u8 array with the following structure:
> [PAYLOAD_HEADER, PAYLOAD_LENGTH, ...PAYLOAD_BODY...]
> 
> PAYLOAD_BODY can be at most 255 bytes long, as it's size is represented
> by PAYLOAD_LENGTH. Therefore we can reduce the stack memory allocated to
> payload_buffer[] roughly by half, from 512 to 257 bytes.

Nice catch, thanks

Acked-by: Heiko Stuebner <he...@sntech.de>

on a bq Cervantes (imx6sl)
Tested-by: Heiko Stuebner <he...@sntech.de>


As a side-note, this change conflicts with one of my patches adding devicetree 
support to the driver [0], which Dmitry will hopefully also look at soon.

So one of us might need to respin his series depending on the ordering.



[0] http://permalink.gmane.org/gmane.linux.kernel.input/33587




> 
> Signed-off-by: Luis Ortega <luior...@upv.es>
> ---
>  drivers/input/touchscreen/zforce_ts.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/input/touchscreen/zforce_ts.c
> b/drivers/input/touchscreen/zforce_ts.c index e082d5c..afb2492 100644
> --- a/drivers/input/touchscreen/zforce_ts.c
> +++ b/drivers/input/touchscreen/zforce_ts.c
> @@ -33,6 +33,7 @@
>  #define WAIT_TIMEOUT         msecs_to_jiffies(1000)
> 
>  #define FRAME_START          0xee
> +#define FRAME_MAXSIZE                257
> 
>  /* Offsets of the different parts of the payload the controller sends */
>  #define PAYLOAD_HEADER               0
> @@ -475,7 +476,7 @@ static irqreturn_t zforce_irq_thread(int irq, void
> *dev_id) struct i2c_client *client = ts->client;
>       const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev);
>       int ret;
> -     u8 payload_buffer[512];
> +     u8 payload_buffer[FRAME_MAXSIZE];
>       u8 *payload;
> 
>       /*

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to