I'm seeing a problem with latest mm releases; with 2.6.11-rc1,2-mmX every time
I fire up k3b, it get stuck here: (last line, previous lines just for
documentation :) )
open("/dev/hdc", O_RDONLY|O_NONBLOCK) = 11
ioctl(11, CDROM_SEND_PACKET, 0xbfffc4e0) = 0
close(11) = 0
open("/dev/hdc", O_RDONLY|O_NONBLOCK) = 11
ioctl(11, CDROM_SEND_PACKET, 0xbfffc590) = -1 EIO (Input/output error)
close(11) = 0
open("/dev/hdc", O_RDONLY|O_NONBLOCK) = 11
ioctl(11, CDROM_SEND_PACKET, 0xbfffc4e0) = 0
ioctl(11, CDROM_SEND_PACKET, 0xbfffc4e0) = 0
close(11) = 0
open("/dev/hdc", O_RDONLY|O_NONBLOCK) = 11
ioctl(11, CDROM_GET_CAPABILITY or SNDRV_SEQ_IOCTL_UNSUBSCRIBE_PORT,
0x7fffffff) = 3735535
close(11) = 0
lstat64("/dev", {st_mode=S_IFDIR|S_ISVTX|0777, st_size=30220, ...}) = 0
lstat64("/dev/sr1", {st_mode=S_IFBLK|0600, st_rdev=makedev(11, 1), ...}) = 0
open("/dev/sr1", O_RDONLY|O_NONBLOCK) = 11
fstat64(11, {st_mode=S_IFBLK|0600, st_rdev=makedev(11, 1), ...}) = 0
ioctl(11, CDROM_SEND_PACKET, 0xbfffd740) = 0
close(11) = 0
open("/dev/sr1", O_RDONLY|O_NONBLOCK) = 11
fstat64(11, {st_mode=S_IFBLK|0600, st_rdev=makedev(11, 1), ...}) = 0
ioctl(11, CDROMAUDIOBUFSIZ or SCSI_IOCTL_GET_IDLUN, 0xbfffd7e8) = 0
ioctl(11, SCSI_IOCTL_GET_BUS_NUMBER, 0xbfffd8a4) = 0
close(11) = 0
open("/dev/sr1", O_RDONLY|O_NONBLOCK) = 11
ioctl(11, CDROM_SEND_PACKET, 0xbfffd7d0) = 0
ioctl(11, CDROM_SEND_PACKET
At this point k3b is stuck in D stat, needs reboot.
I've thinked of faulty HW, but 2.6.10-mm2 can complete the scan (I haven't
tried to use that device, to ber honest, after successful initialization).
On scsi- bus I've the following devices:
[EMAIL PROTECTED] ~ $ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: Nikon Model: COOLSCANIII Rev: 1.31
Type: Scanner ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: YAMAHA Model: CRW6416S Rev: 1.0c
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
[EMAIL PROTECTED] ~ $ cat /proc/scsi/aic7xxx/0
Adaptec AIC7xxx driver version: 6.2.36
Adaptec 2902/04/10/15/20C/30C SCSI adapter
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
Allocated SCBs: 4, SG List Length: 128
Let me know if further details/testing are needed.
--
Fabio Coatti http://members.ferrara.linux.it/cova
Ferrara Linux Users Group http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
