On Sun, 2005-01-30 at 19:58, Nigel Cunningham wrote:
> Do you also disable the WOL event when resuming?

Good catch.  How's this look?

--- linux-2.6.11-rc2/drivers/net/e100.c.orig    2005-01-30 19:13:56.850497376 
-0800
+++ linux-2.6.11-rc2/drivers/net/e100.c 2005-01-30 20:53:22.630560952 -0800
@@ -1868,7 +1868,6 @@ static int e100_set_wol(struct net_devic
        else
                nic->flags &= ~wol_magic;
 
-       pci_enable_wake(nic->pdev, 0, nic->flags & (wol_magic | e100_asf(nic)));
        e100_exec_cb(nic, NULL, e100_configure);
 
        return 0;
@@ -2262,8 +2261,6 @@ static int __devinit e100_probe(struct p
           (nic->eeprom[eeprom_id] & eeprom_id_wol))
                nic->flags |= wol_magic;
 
-       pci_enable_wake(pdev, 0, nic->flags & (wol_magic | e100_asf(nic)));
-
        strcpy(netdev->name, "eth%d");
        if((err = register_netdev(netdev))) {
                DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n");
@@ -2320,7 +2317,8 @@ static int e100_suspend(struct pci_dev *
        netif_device_detach(netdev);
 
        pci_save_state(pdev);
-       pci_enable_wake(pdev, state, nic->flags & (wol_magic | e100_asf(nic)));
+       pci_enable_wake(pdev, pci_choose_state(pdev, state),
+               nic->flags & (wol_magic | e100_asf(nic)));
        pci_disable_device(pdev);
        pci_set_power_state(pdev, pci_choose_state(pdev, state));
 
@@ -2333,6 +2331,7 @@ static int e100_resume(struct pci_dev *p
        struct nic *nic = netdev_priv(netdev);
 
        pci_set_power_state(pdev, PCI_D0);
+       pci_enable_wake(pdev, PCI_D0, 0);
        pci_restore_state(pdev);
        e100_hw_init(nic);
 
@@ -2344,6 +2343,15 @@ static int e100_resume(struct pci_dev *p
 }
 #endif
 
+static void e100_shutdown(struct device *dev)
+{
+       struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+       struct net_device *netdev = pci_get_drvdata(pdev);
+       struct nic *nic = netdev_priv(netdev);
+
+       pci_enable_wake(pdev, PCI_D0, nic->flags & (wol_magic | e100_asf(nic)));
+}
+
 static struct pci_driver e100_driver = {
        .name =         DRV_NAME,
        .id_table =     e100_id_table,
@@ -2353,6 +2361,9 @@ static struct pci_driver e100_driver = {
        .suspend =      e100_suspend,
        .resume =       e100_resume,
 #endif
+       .driver = {
+               .shutdown = e100_shutdown,
+       }
 };
 
 static int __init e100_init_module(void)


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to