Add documentation for the ONFI NAND timing mode property. Signed-off-by: Boris BREZILLON <b.brezillon....@gmail.com> --- Changes since v2: - fix description of the nand-timing-mode property: the mode property is a mask containing all supported modes, each mode is encoded as a bit position
Documentation/devicetree/bindings/mtd/nand.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt index 0c962296..60c7112 100644 --- a/Documentation/devicetree/bindings/mtd/nand.txt +++ b/Documentation/devicetree/bindings/mtd/nand.txt @@ -8,3 +8,10 @@ E.g. : nand-ecc-level = <4 512>; /* 4 bits / 512 bytes */ - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false +- onfi,nand-timing-mode: an integer encoding the supported ONFI timing modes of + the NAND chip. Each supported mode is represented as a bit position (i.e. : + mode 0 and 1 => (1 << 0) | (1 << 1) = 0x3). + This is only used when the chip does not support the ONFI standard. + The last bit set represent the closest mode fulfilling the NAND chip timings. + For a full description of the different timing modes see this document: + www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/