Disabling nf_nat_h323 and nf_conntrack_h323 avoids crash - but video conferencing software is no more usable.
=================================================================================== BUG: unable to handle kernel paging request at 00100104 IP: [<f8214f07>] nf_ct_unlink_expect_report+0x57/0xf0 [nf_conntrack] *pdpt = 00000000359aa001 *pde = 0000000000000000 Oops: 0002 [#1] SMPModules linked in: nf_conntrack_netlink nfnetlink xt_mac xt_TCPMSS ipt_MASQUERADE xt_pkttype xt_multiport xt_REDIRECT xt_nat iptable_mangle xt_LOG xt_limit af_packet
act_mirred cls_u32 sch_ingress sch_hfsc ifb xt_tcpudp ip6t_REJECT ipt_REJECT ip6table_raw iptable_raw xt_CT iptable_filter nf_nat_pptp nf_nat_proto_grenf_conntrack_proto_udplite nf_conntrack_proto_dccp ip6table_mangle iptable_nat
nf_nat_ipv4 nf_nat_sip nf_nat_irc nf_nat_snmp_basic nf_conntrack_snmpnf_conntrack_broadcast nf_nat_h323 nf_nat_tftp nf_nat_ftp nf_nat nf_conntrack_h323
nf_conntrack_tftp nf_conntrack_proto_sctp nf_conntrack_sip nf_conntrack_irc nf_conntrack_pptp nf_conntrack_proto_gre nf_conntrack_ftp nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables padlock_sha padlock_aes e_powersaver freq_table mperf via_cputemp hwmon_vid serio_raw pcspkr i2c_viapro ehci_pci fan thermal processor 8139too sg thermal_sys button shpchp 8139cp pci_hotplug mii via_agp ext4 crc16 jbd2 pata_via sata_via libata sd_mod scsi_mod ohci_hcd uhci_hcd ehci_hcd CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.28-9500-smp_m #1 Hardware name: /CN700-8237, BIOS 6.00 PG 08/30/2007 task: c07ce180 ti: f6408000 task.ti: c07c2000 EIP: 0060:[<f8214f07>] EFLAGS: 00210206 CPU: 0 EIP is at nf_ct_unlink_expect_report+0x57/0xf0 [nf_conntrack] EAX: 00100100 EBX: eb636bc0 ECX: 00000000 EDX: eb461540 ESI: c0804e00 EDI: eb461544 EBP: f6409f08 ESP: f6409eec DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: 00100104 CR3: 359d4000 CR4: 000006b0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Stack: 00000000 00200286 f6409f08 c0244bd8 eb636bc0 00100100 00000000 f6409f18 f8215687 f598ede8 c0804e00 f6409f28 f8211c99 f598ede8 f598ee50 f6409f5c f8212e5e 00000003 00000000 00000000 00000004 eb461514 f598ede8 00000000 Call Trace: [<c0244bd8>] ? del_timer+0x48/0x70 [<f8215687>] nf_ct_remove_expectations+0x47/0x60 [nf_conntrack] [<f8211c99>] nf_ct_delete_from_lists+0x59/0x90 [nf_conntrack] [<f8212e5e>] death_by_timeout+0x14e/0x1c0 [nf_conntrack] [<f8212d10>] ? nf_conntrack_set_hashsize+0x190/0x190 [nf_conntrack] [<c024442d>] call_timer_fn+0x1d/0x80 [<c024461e>] run_timer_softirq+0x18e/0x1a0 [<f8212d10>] ? nf_conntrack_set_hashsize+0x190/0x190 [nf_conntrack] [<c023e6f3>] __do_softirq+0xa3/0x170 [<c023e650>] ? __local_bh_enable+0x70/0x70 <IRQ> [<c023e587>] ? irq_exit+0x67/0xa0 [<c0202af6>] ? do_IRQ+0x46/0xb0 [<c027ad05>] ? clockevents_notify+0x35/0x110 [<c066ac6c>] ? common_interrupt+0x2c/0x40 [<c056e3c1>] ? cpuidle_enter_state+0x41/0xf0 [<c056e6fb>] ? cpuidle_idle_call+0x8b/0x100 [<c02085f8>] ? arch_cpu_idle+0x8/0x30 [<c027314b>] ? cpu_idle_loop+0x4b/0x140 [<c0273258>] ? cpu_startup_entry+0x18/0x20 [<c066056d>] ? rest_init+0x5d/0x70 [<c0813ac8>] ? start_kernel+0x2ec/0x2f2 [<c081364f>] ? repair_env_string+0x5b/0x5b [<c0813269>] ? i386_start_kernel+0x33/0x35 Code: 8b 7b 0c 8b b6 98 00 00 00 85 c0 89 07 74 03 89 78 04 c7 43 0c 00 02 20 00 83 ae ec 05 00 00 01 8b 03 8b 7b 04 85 c0 89 07 74 03 <89> 78 04 8b 43 7c c7 03 00 01 10 00 c7 43 04 00 02 20 00 80 6cEIP: [<f8214f07>] nf_ct_unlink_expect_report+0x57/0xf0 [nf_conntrack] SS:ESP 0068:f6409eec
CR2: 0000000000100104 ---[ end trace 79fe2e6b81f54dee ]--- Kernel panic - not syncing: Fatal exception in interrupt Rebooting in 300 seconds.. =================================================================================== Polycom Version: 3.1-44477 running on device: Apple iPad Mini using operating system: iOS Version: 7.0.4 Attached also my kernel config. Hopefully someone could help... BR, Toni
config.gz
Description: GNU Zip compressed data
