From: Srinivas Kandagatla <srinivas.kandaga...@st.com>
This patch adds support to STiH416 SOC, which has two ethernet
snps,dwmac controllers version 3.710. With this patch B2000 and B2020
boards can boot with ethernet in MII and RGMII modes.
Tested on both B2020 and B2000.
Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@st.com>
---
arch/arm/boot/dts/stih416-clock.dtsi | 14 ++++
arch/arm/boot/dts/stih416-pinctrl.dtsi | 109 ++++++++++++++++++++++++++++++++
arch/arm/boot/dts/stih416.dtsi | 44 +++++++++++++
3 files changed, 167 insertions(+)
diff --git a/arch/arm/boot/dts/stih416-clock.dtsi
b/arch/arm/boot/dts/stih416-clock.dtsi
index 7026bf1..a6942c7 100644
--- a/arch/arm/boot/dts/stih416-clock.dtsi
+++ b/arch/arm/boot/dts/stih416-clock.dtsi
@@ -37,5 +37,19 @@
clock-frequency = <100000000>;
clock-output-names = "CLK_S_ICN_REG_0";
};
+
+ CLK_S_GMAC0_PHY: clockgenA1@7 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "CLK_S_GMAC0_PHY";
+ };
+
+ CLK_S_ETH1_PHY: clockgenA0@7 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "CLK_S_ETH1_PHY";
+ };
};
};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi
b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index 8863c38..c4beef2 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -132,6 +132,58 @@
};
};
};
+
+ gmac1 {
+ pinctrl_mii1: mii1 {
+ st,pins {
+ txd0 = <&PIO0 0 ALT1 OUT
SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&PIO0 1 ALT1 OUT
SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&PIO0 2 ALT1 OUT
SE_NICLK_IO 0 CLK_A>;
+ txd3 = <&PIO0 3 ALT1 OUT
SE_NICLK_IO 0 CLK_A>;
+ txer = <&PIO0 4 ALT1 OUT
SE_NICLK_IO 0 CLK_A>;
+ txen = <&PIO0 5 ALT1 OUT
SE_NICLK_IO 0 CLK_A>;
+ txclk = <&PIO0 6 ALT1 IN NICLK
0 CLK_A>;
+ col = <&PIO0 7 ALT1 IN BYPASS
1000>;
+
+ mdio = <&PIO1 0 ALT1 OUT
BYPASS 1500>;
+ mdc = <&PIO1 1 ALT1 OUT NICLK
0 CLK_A>;
+ crs = <&PIO1 2 ALT1 IN BYPASS
1000>;
+ mdint = <&PIO1 3 ALT1 IN BYPASS
0>;
+ rxd0 = <&PIO1 4 ALT1 IN
SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&PIO1 5 ALT1 IN
SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&PIO1 6 ALT1 IN
SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&PIO1 7 ALT1 IN
SE_NICLK_IO 0 CLK_A>;
+
+ rxdv = <&PIO2 0 ALT1 IN
SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&PIO2 1 ALT1 IN
SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&PIO2 2 ALT1 IN NICLK
0 CLK_A>;
+ phyclk = <&PIO2 3 ALT1 OUT
NICLK 0 CLK_A>;
+ };
+ };
+ pinctrl_rgmii1: rgmii1-0 {
+ st,pins {
+ txd0 = <&PIO0 0 ALT1 OUT DE_IO
500 CLK_A>;
+ txd1 = <&PIO0 1 ALT1 OUT DE_IO
500 CLK_A>;
+ txd2 = <&PIO0 2 ALT1 OUT DE_IO
500 CLK_A>;
+ txd3 = <&PIO0 3 ALT1 OUT DE_IO
500 CLK_A>;
+ txen = <&PIO0 5 ALT1 OUT DE_IO
0 CLK_A>;
+ txclk = <&PIO0 6 ALT1 IN NICLK
0 CLK_A>;
+
+ mdio = <&PIO1 0 ALT1 OUT BYPASS
0>;
+ mdc = <&PIO1 1 ALT1 OUT NICLK
0 CLK_A>;
+ rxd0 = <&PIO1 4 ALT1 IN DE_IO
500 CLK_A>;
+ rxd1 = <&PIO1 5 ALT1 IN DE_IO
500 CLK_A>;
+ rxd2 = <&PIO1 6 ALT1 IN DE_IO
500 CLK_A>;
+ rxd3 = <&PIO1 7 ALT1 IN DE_IO
500 CLK_A>;
+
+ rxdv = <&PIO2 0 ALT1 IN
DE_IO 500 CLK_A>;
+ rxclk = <&PIO2 2 ALT1 IN
NICLK 0 CLK_A>;
+ phyclk = <&PIO2 3 ALT4 OUT
NICLK 0 CLK_B>;
+
+ clk125= <&PIO3 7 ALT4 IN NICLK
0 CLK_A>;
+ };
+ };
+ };
};
pin-controller-front {
@@ -322,6 +374,63 @@
};
};
};
+
+ gmac0 {
+ pinctrl_mii0: mii0 {
+ st,pins {
+ mdint = <&PIO13 6 ALT2 IN
BYPASS 0>;
+ txen = <&PIO13 7 ALT2 OUT
SE_NICLK_IO 0 CLK_A>;
+ txd0 = <&PIO14 0 ALT2 OUT
SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&PIO14 1 ALT2 OUT
SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&PIO14 2 ALT2 OUT
SE_NICLK_IO 0 CLK_B>;
+ txd3 = <&PIO14 3 ALT2 OUT
SE_NICLK_IO 0 CLK_B>;
+
+ txclk = <&PIO15 0 ALT2 IN
NICLK 0 CLK_A>;
+ txer = <&PIO15 1 ALT2 OUT
SE_NICLK_IO 0 CLK_A>;
+ crs = <&PIO15 2 ALT2 IN BYPASS
1000>;
+ col = <&PIO15 3 ALT2 IN BYPASS
1000>;
+ mdio= <&PIO15 4 ALT2 OUT BYPASS
1500>;
+ mdc = <&PIO15 5 ALT2 OUT NICLK
0 CLK_B>;
+
+ rxd0 = <&PIO16 0 ALT2 IN
SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&PIO16 1 ALT2 IN
SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&PIO16 2 ALT2 IN
SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&PIO16 3 ALT2 IN
SE_NICLK_IO 0 CLK_A>;
+ rxdv = <&PIO15 6 ALT2 IN
SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&PIO15 7 ALT2 IN
SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&PIO17 0 ALT2 IN NICLK
0 CLK_A>;
+ phyclk = <&PIO13 5 ALT2 OUT
NICLK 0 CLK_B>;
+ };
+ };
+
+ pinctrl_gmii0: gmii0 {
+ st,pins {
+ };
+ };
+ pinctrl_rgmii0: rgmii0 {
+ st,pins {
+ phyclk = <&PIO13 5 ALT4 OUT
NICLK 0 CLK_B>;
+ txen = <&PIO13 7 ALT2 OUT
DE_IO 0 CLK_A>;
+ txd0 = <&PIO14 0 ALT2 OUT
DE_IO 500 CLK_A>;
+ txd1 = <&PIO14 1 ALT2 OUT
DE_IO 500 CLK_A>;
+ txd2 = <&PIO14 2 ALT2 OUT
DE_IO 500 CLK_B>;
+ txd3 = <&PIO14 3 ALT2 OUT
DE_IO 500 CLK_B>;
+ txclk = <&PIO15 0 ALT2 IN
NICLK 0 CLK_A>;
+
+ mdio = <&PIO15 4 ALT2 OUT
BYPASS 0>;
+ mdc = <&PIO15 5 ALT2 OUT NICLK
0 CLK_B>;
+
+ rxdv = <&PIO15 6 ALT2 IN DE_IO
500 CLK_A>;
+ rxd0 =<&PIO16 0 ALT2 IN DE_IO
500 CLK_A>;
+ rxd1 =<&PIO16 1 ALT2 IN DE_IO
500 CLK_A>;
+ rxd2 =<&PIO16 2 ALT2 IN DE_IO
500 CLK_A>;
+ rxd3 =<&PIO16 3 ALT2 IN DE_IO
500 CLK_A>;
+ rxclk =<&PIO17 0 ALT2 IN NICLK
0 CLK_A>;
+
+ clk125=<&PIO17 6 ALT1 IN NICLK
0 CLK_A>;
+ };
+ };
+ };
};
pin-controller-fvdp-fe {
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 788ba5b..a96055b 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -156,5 +156,49 @@
status = "disabled";
};
+
+ ethernet0: dwmac@fe810000 {
+ device_type = "network";
+ compatible = "st,stih416-dwmac", "snps,dwmac",
"snps,dwmac-3.710";
+ status = "disabled";
+ reg = <0xfe810000 0x8000>, <0x8bc 0x4>;
+ reg-names = "stmmaceth", "sti-ethconf";
+
+ interrupts = <0 133 0>, <0 134 0>, <0 135 0>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+
+ snps,pbl = <32>;
+ snps,mixed-burst;
+
+ st,syscon = <&syscfg_rear>;
+ resets = <&softreset
STIH416_ETH0_SOFTRESET>;
+ reset-names = "stmmaceth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mii0>;
+ clock-names = "stmmaceth";
+ clocks = <&CLK_S_GMAC0_PHY>;
+ };
+
+ ethernet1: dwmac@fef08000 {
+ device_type = "network";
+ compatible = "st,stih416-dwmac",
"snps,dwmac", "snps,dwmac-3.710";
+ status = "disabled";
+ reg = <0xfef08000 0x8000>, <0x7f0 0x4>;
+ reg-names = "stmmaceth", "sti-ethconf";
+ interrupts = <0 136 0>, <0 137 0>, <0 138 0>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+
+ snps,pbl = <32>;
+ snps,mixed-burst;
+
+ st,syscon = <&syscfg_sbc>;
+
+ resets = <&softreset STIH416_ETH1_SOFTRESET>;
+ reset-names = "stmmaceth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mii1>;
+ clock-names = "stmmaceth";
+ clocks = <&CLK_S_ETH1_PHY>;
+ };
};
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
