On 05/02/14 06:52, Magnus Damm wrote:
From: Magnus Damm <[email protected]>

Convert the code to allow per-device probe() like other device
drivers. This also delays driver registration due to change from
subsys_initcall() to regular module_platform_driver().

Signed-off-by: Magnus Damm <[email protected]>
---

  drivers/pci/host/pci-rcar-gen2.c |   74 ++++++++------------------------------
  1 file changed, 16 insertions(+), 58 deletions(-)

--- 0001/drivers/pci/host/pci-rcar-gen2.c
+++ work/drivers/pci/host/pci-rcar-gen2.c       2014-02-04 16:38:46.000000000 
+0900
@@ -74,9 +74,6 @@

  #define RCAR_PCI_UNIT_REV_REG         (RCAR_AHBPCI_PCICOM_OFFSET + 0x48)

-/* Number of internal PCI controllers */
-#define RCAR_PCI_NR_CONTROLLERS                3
-
  struct rcar_pci_priv {
        struct device *dev;
        void __iomem *reg;
@@ -228,6 +225,8 @@ static int __init rcar_pci_setup(int nr,
        pci_add_resource(&sys->resources, &priv->io_res);
        pci_add_resource(&sys->resources, &priv->mem_res);

+       /* Setup bus number based on platform device id */
+       sys->busnr = to_platform_device(priv->dev)->id;
        return 1;
  }

@@ -236,48 +235,12 @@ static struct pci_ops rcar_pci_ops = {
        .write  = rcar_pci_write_config,
  };

-static struct hw_pci rcar_hw_pci __initdata = {
-       .map_irq        = rcar_pci_map_irq,
-       .ops            = &rcar_pci_ops,
-       .setup          = rcar_pci_setup,
-};
-
-static int rcar_pci_count __initdata;
-
-static int __init rcar_pci_add_controller(struct rcar_pci_priv *priv)
-{
-       void **private_data;
-       int count;
-
-       if (rcar_hw_pci.nr_controllers < rcar_pci_count)
-               goto add_priv;
-
-       /* (Re)allocate private data pointer array if needed */
-       count = rcar_pci_count + RCAR_PCI_NR_CONTROLLERS;
-       private_data = kzalloc(count * sizeof(void *), GFP_KERNEL);
-       if (!private_data)
-               return -ENOMEM;
-
-       rcar_pci_count = count;
-       if (rcar_hw_pci.private_data) {
-               memcpy(private_data, rcar_hw_pci.private_data,
-                      rcar_hw_pci.nr_controllers * sizeof(void *));
-               kfree(rcar_hw_pci.private_data);
-       }
-
-       rcar_hw_pci.private_data = private_data;
-
-add_priv:
-       /* Add private data pointer to the array */
-       rcar_hw_pci.private_data[rcar_hw_pci.nr_controllers++] = priv;
-       return 0;
-}
-
-static int __init rcar_pci_probe(struct platform_device *pdev)
+static int rcar_pci_probe(struct platform_device *pdev)
  {
        struct resource *cfg_res, *mem_res;
        struct rcar_pci_priv *priv;
        void __iomem *reg;
+       struct hw_pci hw;

        cfg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        reg = devm_ioremap_resource(&pdev->dev, cfg_res);
@@ -308,31 +271,26 @@ static int __init rcar_pci_probe(struct
        priv->reg = reg;
        priv->dev = &pdev->dev;

-       return rcar_pci_add_controller(priv);
+       memset(&hw, 0, sizeof(hw));
+       hw.nr_controllers = 1;
+       hw.private_data = (void **)&priv;
+       hw.map_irq = rcar_pci_map_irq;
+       hw.ops = &rcar_pci_ops;
+       hw.setup = rcar_pci_setup;
+       pci_common_init_dev(&pdev->dev, &hw);
+       return 0;
  }

Do we really want to explicitly set the bus number here?


  static struct platform_driver rcar_pci_driver = {
        .driver = {
                .name = "pci-rcar-gen2",
+               .owner = THIS_MODULE,
+               .suppress_bind_attrs = true,
        },
+       .probe = rcar_pci_probe,
  };


--
Ben Dooks                               http://www.codethink.co.uk/
Senior Engineer                         Codethink - Providing Genius
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to