> 27_ide_remove_cmd.patch
>
> Removed unused REQ_DRIVE_CMD handling.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
Index: linux-ide-export/drivers/ide/ide-io.c
===================================================================
--- linux-ide-export.orig/drivers/ide/ide-io.c 2005-02-02 10:28:06.952917467
+0900
+++ linux-ide-export/drivers/ide/ide-io.c 2005-02-02 10:28:07.650804235
+0900
@@ -340,17 +340,7 @@ void ide_end_drive_cmd (ide_drive_t *dri
rq = HWGROUP(drive)->rq;
spin_unlock_irqrestore(&ide_lock, flags);
- if (rq->flags & REQ_DRIVE_CMD) {
- u8 *args = (u8 *) rq->buffer;
- if (rq->errors == 0)
- rq->errors = !OK_STAT(stat,READY_STAT,BAD_STAT);
-
- if (args) {
- args[0] = stat;
- args[1] = err;
- args[2] = hwif->INB(IDE_NSECTOR_REG);
- }
- } else if (rq->flags & REQ_DRIVE_TASKFILE) {
+ if (rq->flags & REQ_DRIVE_TASKFILE) {
ide_task_t *args = (ide_task_t *) rq->special;
if (rq->errors == 0)
rq->errors = !OK_STAT(stat,READY_STAT,BAD_STAT);
@@ -536,7 +526,7 @@ ide_startstop_t ide_error (ide_drive_t *
return ide_stopped;
/* retry only "normal" I/O: */
- if (rq->flags & (REQ_DRIVE_CMD | REQ_DRIVE_TASKFILE)) {
+ if (rq->flags & REQ_DRIVE_TASKFILE) {
rq->errors = 1;
ide_end_drive_cmd(drive, stat, err);
return ide_stopped;
@@ -578,7 +568,7 @@ ide_startstop_t ide_abort(ide_drive_t *d
return ide_stopped;
/* retry only "normal" I/O: */
- if (rq->flags & (REQ_DRIVE_CMD | REQ_DRIVE_TASKFILE)) {
+ if (rq->flags & REQ_DRIVE_TASKFILE) {
rq->errors = 1;
ide_end_drive_cmd(drive, BUSY_STAT, 0);
return ide_stopped;
@@ -588,63 +578,6 @@ ide_startstop_t ide_abort(ide_drive_t *d
}
/**
- * ide_cmd - issue a simple drive command
- * @drive: drive the command is for
- * @cmd: command byte
- * @nsect: sector byte
- * @handler: handler for the command completion
- *
- * Issue a simple drive command with interrupts.
- * The drive must be selected beforehand.
- */
-
-static void ide_cmd (ide_drive_t *drive, u8 cmd, u8 nsect,
- ide_handler_t *handler)
-{
- ide_hwif_t *hwif = HWIF(drive);
- if (IDE_CONTROL_REG)
- hwif->OUTB(drive->ctl,IDE_CONTROL_REG); /* clear nIEN */
- SELECT_MASK(drive,0);
- hwif->OUTB(nsect,IDE_NSECTOR_REG);
- ide_execute_command(drive, cmd, handler, WAIT_CMD, NULL);
-}
-
-/**
- * drive_cmd_intr - drive command completion interrupt
- * @drive: drive the completion interrupt occurred on
- *
- * drive_cmd_intr() is invoked on completion of a special DRIVE_CMD.
- * We do any necessary daya reading and then wait for the drive to
- * go non busy. At that point we may read the error data and complete
- * the request
- */
-
-static ide_startstop_t drive_cmd_intr (ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
- ide_hwif_t *hwif = HWIF(drive);
- u8 *args = (u8 *) rq->buffer;
- u8 stat = hwif->INB(IDE_STATUS_REG);
- int retries = 10;
-
- local_irq_enable();
- if ((stat & DRQ_STAT) && args && args[3]) {
- u8 io_32bit = drive->io_32bit;
- drive->io_32bit = 0;
- hwif->ata_input_data(drive, &args[4], args[3] * SECTOR_WORDS);
- drive->io_32bit = io_32bit;
- while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) &&
retries--)
- udelay(100);
- }
-
- if (!OK_STAT(stat, READY_STAT, BAD_STAT) && DRIVER(drive) != NULL)
- return ide_error(drive, "drive_cmd", stat);
- /* calls ide_end_drive_cmd */
- ide_end_drive_cmd(drive, stat, hwif->INB(IDE_ERROR_REG));
- return ide_stopped;
-}
-
-/**
* do_special - issue some special commands
* @drive: drive the command is for
*
@@ -699,78 +632,50 @@ void ide_init_sg_cmd(ide_drive_t *drive,
EXPORT_SYMBOL_GPL(ide_init_sg_cmd);
/**
- * execute_drive_command - issue special drive command
+ * execute_drive_taskfile - issue special drive command
* @drive: the drive to issue th command on
* @rq: the request structure holding the command
*
- * execute_drive_cmd() issues a special drive command, usually
- * initiated by ioctl() from the external hdparm program. The
- * command can be a drive command, drive task or taskfile
- * operation. Weirdly you can call it with NULL to wait for
- * all commands to finish. Don't do this as that is due to change
+ * execute_drive_taskfile() issues a special drive command,
+ * usually initiated by ioctl() from the external hdparm program.
+ * Weirdly you can call it with NULL to wait for all commands to
+ * finish. Don't do this as that is due to change
*/
-static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
- struct request *rq)
+static ide_startstop_t execute_drive_taskfile (ide_drive_t *drive,
+ struct request *rq)
{
ide_hwif_t *hwif = HWIF(drive);
- if (rq->flags & REQ_DRIVE_TASKFILE) {
- ide_task_t *args = rq->special;
-
- if (!args)
- goto done;
-
- hwif->data_phase = args->data_phase;
-
- switch (hwif->data_phase) {
- case TASKFILE_MULTI_OUT:
- case TASKFILE_OUT:
- case TASKFILE_MULTI_IN:
- case TASKFILE_IN:
- ide_init_sg_cmd(drive, rq);
- ide_map_sg(drive, rq);
- default:
- break;
- }
+ ide_task_t *args = rq->special;
- return do_taskfile(drive, args);
- } else if (rq->flags & REQ_DRIVE_CMD) {
- u8 *args = rq->buffer;
-
- if (!args)
- goto done;
-#ifdef DEBUG
- printk("%s: DRIVE_CMD ", drive->name);
- printk("cmd=0x%02x ", args[0]);
- printk("sc=0x%02x ", args[1]);
- printk("fr=0x%02x ", args[2]);
- printk("xx=0x%02x\n", args[3]);
-#endif
- if (args[0] == WIN_SMART) {
- hwif->OUTB(0x4f, IDE_LCYL_REG);
- hwif->OUTB(0xc2, IDE_HCYL_REG);
- hwif->OUTB(args[2],IDE_FEATURE_REG);
- hwif->OUTB(args[1],IDE_SECTOR_REG);
- ide_cmd(drive, args[0], args[3], &drive_cmd_intr);
- return ide_started;
- }
- hwif->OUTB(args[2],IDE_FEATURE_REG);
- ide_cmd(drive, args[0], args[1], &drive_cmd_intr);
- return ide_started;
- }
-
-done:
- /*
- * NULL is actually a valid way of waiting for
- * all current requests to be flushed from the queue.
- */
+ if (!args) {
+ /*
+ * NULL is actually a valid way of waiting for
+ * all current requests to be flushed from the queue.
+ */
#ifdef DEBUG
- printk("%s: DRIVE_CMD (null)\n", drive->name);
+ printk("%s: DRIVE_TASKFILE (null)\n", drive->name);
#endif
- ide_end_drive_cmd(drive,
- hwif->INB(IDE_STATUS_REG),
- hwif->INB(IDE_ERROR_REG));
- return ide_stopped;
+ ide_end_drive_cmd(drive,
+ hwif->INB(IDE_STATUS_REG),
+ hwif->INB(IDE_ERROR_REG));
+ return ide_stopped;
+ }
+
+ hwif->data_phase = args->data_phase;
+
+ switch (hwif->data_phase) {
+ case TASKFILE_MULTI_OUT:
+ case TASKFILE_OUT:
+ case TASKFILE_MULTI_IN:
+ case TASKFILE_IN:
+ ide_init_sg_cmd(drive, rq);
+ ide_map_sg(drive, rq);
+ default:
+ break;
+ }
+
+ return do_taskfile(drive, args);
}
/**
@@ -845,10 +750,8 @@ static ide_startstop_t start_request (id
return startstop;
}
if (!drive->special.all) {
- if (rq->flags & REQ_DRIVE_CMD)
- return execute_drive_cmd(drive, rq);
- else if (rq->flags & REQ_DRIVE_TASKFILE)
- return execute_drive_cmd(drive, rq);
+ if (rq->flags & REQ_DRIVE_TASKFILE)
+ return execute_drive_taskfile(drive, rq);
else if (blk_pm_request(rq)) {
#ifdef DEBUG_PM
printk("%s: start_power_step(step: %d)\n",
Index: linux-ide-export/include/linux/blkdev.h
===================================================================
--- linux-ide-export.orig/include/linux/blkdev.h 2005-02-02
10:28:06.954917143 +0900
+++ linux-ide-export/include/linux/blkdev.h 2005-02-02 10:28:07.651804072
+0900
@@ -201,7 +201,7 @@ enum rq_flag_bits {
__REQ_FAILED, /* set if the request failed */
__REQ_QUIET, /* don't worry about errors */
__REQ_SPECIAL, /* driver suplied command */
- __REQ_DRIVE_CMD,
+ __REQ_DRIVE_CMD, /* obsolete, unused anymore - tj */
__REQ_DRIVE_TASK, /* obsolete, unused anymore - tj */
__REQ_DRIVE_TASKFILE,
__REQ_PREEMPT, /* set for "ide_preempt" requests */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
