That is all that is actually used, reading more just
makes the code confusing.
In addition also fix the header and separate documentation
to correctly indicate which struct is expected as input.
Maybe these inconsistencies were on purpose at some point
with the intention to improve the IOCTL interface, but
the code has now been unchanged for years and changing
it would break e.g. MPlayer which fills the second half
of the cdrom_msf struck with garbage, so I believe
that at this point it is best commit to current behaviour
and make the whole documentation less confusing.
Signed-off-by: Reimar Döffinger <reimar.doeffin...@gmx.de>
---
Documentation/ioctl/cdrom.txt | 20 +++++++-------------
drivers/cdrom/cdrom.c | 6 +++---
include/uapi/linux/cdrom.h | 6 +++---
3 files changed, 13 insertions(+), 19 deletions(-)
diff --git a/Documentation/ioctl/cdrom.txt b/Documentation/ioctl/cdrom.txt
index 59df81c..e2e8400 100644
--- a/Documentation/ioctl/cdrom.txt
+++ b/Documentation/ioctl/cdrom.txt
@@ -24,9 +24,9 @@ are as follows:
CDROMVOLCTRL Control output volume (struct cdrom_volctrl)
CDROMSUBCHNL Read subchannel data (struct cdrom_subchnl)
CDROMREADMODE2 Read CDROM mode 2 data (2336 Bytes)
- (struct cdrom_read)
+ (struct cdrom_msf0)
CDROMREADMODE1 Read CDROM mode 1 data (2048 Bytes)
- (struct cdrom_read)
+ (struct cdrom_msf0)
CDROMREADAUDIO (struct cdrom_read_audio)
CDROMEJECT_SW enable(1)/disable(0) auto-ejecting
CDROMMULTISESSION Obtain the start-of-last-session
@@ -39,7 +39,7 @@ are as follows:
CDROMVOLREAD Get the drive's volume setting
(struct cdrom_volctrl)
CDROMREADRAW read data in raw mode (2352 Bytes)
- (struct cdrom_read)
+ (struct cdrom_msf0)
CDROMREADCOOKED read data in cooked mode
CDROMSEEK seek msf address
CDROMPLAYBLK scsi-cd only, (struct cdrom_blk)
@@ -345,7 +345,7 @@ CDROMSUBCHNL Read subchannel data
(struct cdrom_subchnl)
CDROMREADRAW read data in raw mode (2352 Bytes)
- (struct cdrom_read)
+ (struct cdrom_msf0)
usage:
@@ -356,8 +356,7 @@ CDROMREADRAW read data in raw mode
(2352 Bytes)
ioctl(fd, CDROMREADRAW, &arg);
inputs:
- cdrom_msf structure indicating an address to read.
- Only the start values are significant.
+ cdrom_msf0 structure indicating an address to read.
outputs:
Data written to address provided by user.
@@ -367,11 +366,6 @@ CDROMREADRAW read data in raw mode
(2352 Bytes)
ENOMEM out of memory
notes:
- As of 2.6.8.1, comments in <linux/cdrom.h> indicate that this
- ioctl accepts a cdrom_read structure, but actual source code
- reads a cdrom_msf structure and writes a buffer of data to
- the same address.
-
MSF values are converted to LBA values via this formula:
lba = (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
@@ -380,7 +374,7 @@ CDROMREADRAW read data in raw mode
(2352 Bytes)
CDROMREADMODE1 Read CDROM mode 1 data (2048 Bytes)
- (struct cdrom_read)
+ (struct cdrom_msf0)
notes:
Identical to CDROMREADRAW except that block size is
@@ -389,7 +383,7 @@ CDROMREADMODE1 Read CDROM mode 1 data
(2048 Bytes)
CDROMREADMODE2 Read CDROM mode 2 data (2336 Bytes)
- (struct cdrom_read)
+ (struct cdrom_msf0)
notes:
Identical to CDROMREADRAW except that block size is
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index 8a3aff7..dab0752 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -2860,7 +2860,7 @@ static noinline int mmc_ioctl_cdrom_read_data(struct
cdrom_device_info *cdi,
int cmd)
{
struct request_sense sense;
- struct cdrom_msf msf;
+ struct cdrom_msf0 msf;
int blocksize = 0, format = 0, lba;
int ret;
@@ -2876,8 +2876,8 @@ static noinline int mmc_ioctl_cdrom_read_data(struct
cdrom_device_info *cdi,
blocksize = CD_FRAMESIZE_RAW0;
break;
}
- IOCTL_IN(arg, struct cdrom_msf, msf);
- lba = msf_to_lba(msf.cdmsf_min0, msf.cdmsf_sec0, msf.cdmsf_frame0);
+ IOCTL_IN(arg, struct cdrom_msf0, msf);
+ lba = msf_to_lba(msf.minute, msf.second, msf.frame);
/* FIXME: we need upper bound checking, too!! */
if (lba < 0)
return -EINVAL;
diff --git a/include/uapi/linux/cdrom.h b/include/uapi/linux/cdrom.h
index bd17ad5..1795488 100644
--- a/include/uapi/linux/cdrom.h
+++ b/include/uapi/linux/cdrom.h
@@ -67,9 +67,9 @@
#define CDROMSUBCHNL 0x530b /* Read subchannel data
(struct cdrom_subchnl) */
#define CDROMREADMODE2 0x530c /* Read CDROM mode 2 data (2336 Bytes)
- (struct cdrom_read) */
+ (struct cdrom_msf0) */
#define CDROMREADMODE1 0x530d /* Read CDROM mode 1 data (2048 Bytes)
- (struct cdrom_read) */
+ (struct cdrom_msf0) */
#define CDROMREADAUDIO 0x530e /* (struct cdrom_read_audio) */
#define CDROMEJECT_SW 0x530f /* enable(1)/disable(0) auto-ejecting */
#define CDROMMULTISESSION 0x5310 /* Obtain the start-of-last-session
@@ -83,7 +83,7 @@
#define CDROMVOLREAD 0x5313 /* Get the drive's volume setting
(struct cdrom_volctrl) */
#define CDROMREADRAW 0x5314 /* read data in raw mode (2352 Bytes)
- (struct cdrom_read) */
+ (struct cdrom_msf0) */
/*
* These ioctls are used only used in aztcd.c and optcd.c
*/
--
1.9.0.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
