On Wed, 2014-02-19 at 13:08 +0900, Mark Brown wrote:
> On Tue, Feb 18, 2014 at 09:12:09AM +0100, Krzysztof Kozlowski wrote:
> > On Tue, 2014-02-18 at 09:35 +0900, Mark Brown wrote:
>
> > > I don't understand the above? Are you saying that suspend mode actually
> > > turns off the regulator or something else? If it's a separate setting
> > > for suspend mode then it should be using the core suspend mode stuff.
>
> > No, it is similar to external control (by GPIO) except that regulator is
> > controlled by PWREN pin. The PMIC's PWREN is not a GPIO, but instead it
> > is directly connected to AP (for Exynos 4212: XPWRRGTON). In AP's normal
> > mode the XPWRRGTON/PWREN is high. In sleep mode *AP* sets it low.
>
> How is that different to suspend mode then?
Now I see... there is no difference. It seems that the whole idea of
opmode can be replaced with suspend modes and regulator modes.
I can't only find a way to set this from DTS. There are no bindings for
regulation_constraints->state_{disk,mem,standby}.
Should the driver set manually after obtaining init_data from DTS?
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
