On 19/02/2014 at 17:00:20 +0000, Mark Rutland wrote : > On Wed, Feb 19, 2014 at 03:32:24PM +0000, Alexandre Belloni wrote: > > This adds preliminary DT support for the at91sam9rl. > > > > Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com> > > --- > > arch/arm/boot/dts/at91sam9rl.dtsi | 628 > > ++++++++++++++++++++++++++++++++++++++ > > arch/arm/mach-at91/at91sam9rl.c | 16 + > > 2 files changed, 644 insertions(+) > > create mode 100644 arch/arm/boot/dts/at91sam9rl.dtsi > > [...] > > > + tcb0: timer@fffa0000 { > > + compatible = "atmel,at91rm9200-tcb"; > > + reg = <0xfffa0000 0x100>; > > + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0 > > + 17 IRQ_TYPE_LEVEL_HIGH 0 > > + 18 IRQ_TYPE_LEVEL_HIGH 0>; > > + }; > > Nit: please bracket list entries individually. Also for other list > properties like reg and (*-)gpio(s). >
OK. > [...] > > > + adc0: adc@fffd0000 { > > + compatible = "atmel,at91sam9260-adc"; > > + reg = <0xfffd0000 0x100>; > > + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; > > + atmel,adc-use-external-triggers; > > + atmel,adc-channels-used = <0xf>; > > + atmel,adc-vref = <3300>; > > + atmel,adc-num-channels = <4>; > > + atmel,adc-startup-time = <15>; > > + atmel,adc-channel-base = <0x30>; > > + atmel,adc-drdy-mask = <0x10000>; > > + atmel,adc-status-register = <0x1c>; > > + atmel,adc-trigger-register = <0x04>; > > + atmel,adc-res = <8 10>; > > + atmel,adc-res-names = "lowres", "highres"; > > + atmel,adc-use-res = "highres"; > > + > > + trigger@0 { > > + trigger-name = "timer-counter-0"; > > + trigger-value = <0x1>; > > + }; > > A unit-address should go with a reg value. Either this needs a reg and > the parent node needs #address-cells and #size-cells, or the > unit-address should go, and the names made unique through other means. > OK, I guess I'll have to fix Documentation/devicetree/bindings/arm/atmel-adc.txt too. > [...] > > > + pinctrl@fffff400 { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + compatible = "atmel,at91rm9200-pinctrl", > > "simple-bus"; > > NAK. Either this is a atmel,at91rm9200-pinctrl node or a simple-bus. Not > both; that doesn't make any sense. > Simply a copy paste, I'll fix that here and also the 6 other atmel dtsi includes. What is your preference for those using: compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; ? > > diff --git a/arch/arm/mach-at91/at91sam9rl.c > > b/arch/arm/mach-at91/at91sam9rl.c > > index 3651517abedf..d6ee8bb47213 100644 > > --- a/arch/arm/mach-at91/at91sam9rl.c > > +++ b/arch/arm/mach-at91/at91sam9rl.c > > @@ -196,6 +196,22 @@ static struct clk_lookup periph_clocks_lookups[] = { > > CLKDEV_CON_ID("pioB", &pioB_clk), > > CLKDEV_CON_ID("pioC", &pioC_clk), > > CLKDEV_CON_ID("pioD", &pioD_clk), > > + /* more lookup table for DT entries */ > > + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), > > + CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), > > + CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk), > > + CLKDEV_CON_DEV_ID("usart", "ffffb800.serial", &usart2_clk), > > + CLKDEV_CON_DEV_ID("usart", "ffffbc00.serial", &usart3_clk), > > + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), > > + CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), > > + CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), > > + CLKDEV_CON_DEV_ID("mci_clk", "fffa4000.mmc", &mmc_clk), > > + CLKDEV_CON_DEV_ID(NULL, "fffa8000.i2c", &twi0_clk), > > + CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi1_clk), > > + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), > > + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), > > + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), > > + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), > > Why can't these clocks be described in the DT? > The issue is twofold: - At that point in the series, at91sam9 SoCs are not supported through the CCF. - Even after supporting CCF, the at91_dt_defconfig is selecting at91 SoCs that are not supported through the CCF hence preventing us from using it. -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/