On Tue, Feb 04, 2014 at 12:36:21PM +0100, Pavel Machek wrote:
> > +#define BQ24261_MIN_CV 3500
> > +#define BQ24261_MAX_CV 4440
>
> Other defines use uV as an unit :-(.
uV is used if the value is read from psy class. For register configurations
uses mV. Will change the name to reflect mV
> > + /* If status is fault, wait for READY before enabling the charging */
> > +
> > + if (!is_ready) {
> > + ret = wait_event_timeout(chip->wait_ready,
> > + (chip->chrgr_stat != BQ24261_CHRGR_STAT_READY),
> > + HZ);
> > + dev_info(&chip->client->dev,
> > + "chrgr_stat=%x\n", chip->chrgr_stat);
> > + if (ret == 0) {
> > + dev_err(&chip->client->dev,
> > + "Waiting for Charger Ready Failed.Enabling
> > charging anyway\n");
> > + }
> > + }
>
> So charger has a problem, and we force it on, anyway? Also put space
> after ".".
Yes, sometimes charger does not give ready, so we force.
>
> > +static inline int bq24261_set_cv(struct bq24261_charger *chip, int cv)
> > +{
> > + int bat_volt;
> > + int ret;
> > + u8 reg_val;
> > + u8 vindpm_val = 0x0;
> > +
> > + /*
> > + * Setting VINDPM value as per the battery voltage
> > + * VBatt Vindpm Register Setting
> > + * < 3.7v 4.2v 0x0 (default)
> > + * 3.71v - 3.96v 4.36v 0x2
> > + * > 3.96v 4.6v 0x5
> > + */
> > + ret = get_battery_voltage(&bat_volt);
> > + if (ret) {
> > + dev_err(&chip->client->dev,
> > + "Error getting battery voltage!!\n");
> > + } else {
>
> You forget the error value and continue anyway.
On error, throw the error and program default VINDPM value.
-Jenny
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
