In order for the DMA controller to work for SDRAM to devices transfers, the AHB
clock should be reparented on the PLL6.
Force that parenting in the clock driver.
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
drivers/clk/sunxi/clk-sunxi.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index cedaf4b..6cfcd23 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -1286,7 +1286,7 @@ static void __init of_sunxi_table_clock_setup(const
struct of_device_id *clk_mat
*/
static void __init sunxi_clock_protect(void)
{
- struct clk *clk;
+ struct clk *clk, *parent;
/* memory bus clock - sun5i+ */
clk = clk_get(NULL, "mbus");
@@ -1309,6 +1309,22 @@ static void __init sunxi_clock_protect(void)
clk_put(clk);
}
+ clk = clk_get(NULL, "ahb1_mux");
+ if (IS_ERR(clk)) {
+ pr_err("Couldn't get AHB1 Mux\n");
+ return;
+ }
+
+ parent = clk_get(NULL, "pll6");
+ if (IS_ERR(clk)) {
+ pr_err("Couldn't get PLL6\n");
+ return;
+ }
+
+ clk_set_parent(clk, parent);
+
+ clk_put(clk);
+ clk_put(parent);
}
static void __init sunxi_init_clocks(void)
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
