From: Geert Uytterhoeven <[email protected]> Add support for Dual/Quad SPI Transfers to the spidev API. As this uses SPI mode bits that don't fit in a single byte, two new ioctls (SPI_IOC_RD_MODE32 and SPI_IOC_WR_MODE32) are introduced.
Signed-off-by: Geert Uytterhoeven <[email protected]> --- v2: - Introduce SPI_IOC_{RD,WR}_MODE32 to avoid breaking backwards compatibility, - Split off the spidev_test changes in a separate patch - Update documentation. Documentation/spi/spidev | 6 ++++++ drivers/spi/spidev.c | 19 +++++++++++++++---- include/uapi/linux/spi/spidev.h | 14 ++++++++++++-- 3 files changed, 33 insertions(+), 6 deletions(-) diff --git a/Documentation/spi/spidev b/Documentation/spi/spidev index ed2da5e5b28a..3d14035b1766 100644 --- a/Documentation/spi/spidev +++ b/Documentation/spi/spidev @@ -85,6 +85,12 @@ settings for data transfer parameters: SPI_MODE_0..SPI_MODE_3; or if you prefer you can combine SPI_CPOL (clock polarity, idle high iff this is set) or SPI_CPHA (clock phase, sample on trailing edge iff this is set) flags. + Note that this request is limited to SPI mode flags that fit in a + single byte. + + SPI_IOC_RD_MODE32, SPI_IOC_WR_MODE32 ... pass a pointer to a uin32_t + which will return (RD) or assign (WR) the full SPI transfer mode, + not limited to the bits that fit in one byte. SPI_IOC_RD_LSB_FIRST, SPI_IOC_WR_LSB_FIRST ... pass a pointer to a byte which will return (RD) or assign (WR) the bit justification used to diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 2abc0f5a82be..e3bc23bb5883 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -73,7 +73,8 @@ static DECLARE_BITMAP(minors, N_SPI_MINORS); */ #define SPI_MODE_MASK (SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \ | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \ - | SPI_NO_CS | SPI_READY) + | SPI_NO_CS | SPI_READY | SPI_TX_DUAL \ + | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD) struct spidev_data { dev_t devt; @@ -265,6 +266,8 @@ static int spidev_message(struct spidev_data *spidev, buf += k_tmp->len; k_tmp->cs_change = !!u_tmp->cs_change; + k_tmp->tx_nbits = u_tmp->tx_nbits; + k_tmp->rx_nbits = u_tmp->rx_nbits; k_tmp->bits_per_word = u_tmp->bits_per_word; k_tmp->delay_usecs = u_tmp->delay_usecs; k_tmp->speed_hz = u_tmp->speed_hz; @@ -359,6 +362,10 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) retval = __put_user(spi->mode & SPI_MODE_MASK, (__u8 __user *)arg); break; + case SPI_IOC_RD_MODE32: + retval = __put_user(spi->mode & SPI_MODE_MASK, + (__u32 __user *)arg); + break; case SPI_IOC_RD_LSB_FIRST: retval = __put_user((spi->mode & SPI_LSB_FIRST) ? 1 : 0, (__u8 __user *)arg); @@ -372,7 +379,11 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) /* write requests */ case SPI_IOC_WR_MODE: - retval = __get_user(tmp, (u8 __user *)arg); + case SPI_IOC_WR_MODE32: + if (cmd == SPI_IOC_WR_MODE) + retval = __get_user(tmp, (u8 __user *)arg); + else + retval = __get_user(tmp, (u32 __user *)arg); if (retval == 0) { u32 save = spi->mode; @@ -382,12 +393,12 @@ spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) } tmp |= spi->mode & ~SPI_MODE_MASK; - spi->mode = (u8)tmp; + spi->mode = (u16)tmp; retval = spi_setup(spi); if (retval < 0) spi->mode = save; else - dev_dbg(&spi->dev, "spi mode %02x\n", tmp); + dev_dbg(&spi->dev, "spi mode %x\n", tmp); } break; case SPI_IOC_WR_LSB_FIRST: diff --git a/include/uapi/linux/spi/spidev.h b/include/uapi/linux/spi/spidev.h index 52d9ed01855f..dd5f21e75805 100644 --- a/include/uapi/linux/spi/spidev.h +++ b/include/uapi/linux/spi/spidev.h @@ -42,6 +42,10 @@ #define SPI_LOOP 0x20 #define SPI_NO_CS 0x40 #define SPI_READY 0x80 +#define SPI_TX_DUAL 0x100 +#define SPI_TX_QUAD 0x200 +#define SPI_RX_DUAL 0x400 +#define SPI_RX_QUAD 0x800 /*---------------------------------------------------------------------------*/ @@ -92,7 +96,9 @@ struct spi_ioc_transfer { __u16 delay_usecs; __u8 bits_per_word; __u8 cs_change; - __u32 pad; + __u8 tx_nbits; + __u8 rx_nbits; + __u16 pad; /* If the contents of 'struct spi_ioc_transfer' ever change * incompatibly, then the ioctl number (currently 0) must change; @@ -110,7 +116,7 @@ struct spi_ioc_transfer { #define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)]) -/* Read / Write of SPI mode (SPI_MODE_0..SPI_MODE_3) */ +/* Read / Write of SPI mode (SPI_MODE_0..SPI_MODE_3) (limited to 8 bits) */ #define SPI_IOC_RD_MODE _IOR(SPI_IOC_MAGIC, 1, __u8) #define SPI_IOC_WR_MODE _IOW(SPI_IOC_MAGIC, 1, __u8) @@ -126,6 +132,10 @@ struct spi_ioc_transfer { #define SPI_IOC_RD_MAX_SPEED_HZ _IOR(SPI_IOC_MAGIC, 4, __u32) #define SPI_IOC_WR_MAX_SPEED_HZ _IOW(SPI_IOC_MAGIC, 4, __u32) +/* Read / Write of the SPI mode field */ +#define SPI_IOC_RD_MODE32 _IOR(SPI_IOC_MAGIC, 5, __u32) +#define SPI_IOC_WR_MODE32 _IOW(SPI_IOC_MAGIC, 5, __u32) + #endif /* SPIDEV_H */ -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
