> This converts twl4030-madc module to use the Industrial IO ADC
> framework and adds device tree support.
> 
> Signed-off-by: Sebastian Reichel <s...@debian.org>
> ---
>  drivers/mfd/twl4030-madc.c | 122 
> ++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 115 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
> index 5458561..81484ee 100644
> --- a/drivers/mfd/twl4030-madc.c
> +++ b/drivers/mfd/twl4030-madc.c
> @@ -47,6 +47,8 @@
>  #include <linux/gfp.h>
>  #include <linux/err.h>
>  
> +#include <linux/iio/iio.h>
> +
>  /*
>   * struct twl4030_madc_data - a container for madc info
>   * @dev - pointer to device structure for madc
> @@ -59,10 +61,74 @@ struct twl4030_madc_data {
>       struct device *dev;
>       struct mutex lock;      /* mutex protecting this data structure */
>       struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS];
> +     bool use_second_irq;

This should go into the same patch that adds the header doc, or visa
versa.

>       int imr;
>       int isr;
>  };
>  
> +static int twl4030_madc_read(struct iio_dev *iio_dev,
> +                          const struct iio_chan_spec *chan,
> +                          int *val, int *val2, long mask)
> +{
> +     struct twl4030_madc_data *madc = iio_priv(iio_dev);
> +     struct twl4030_madc_request req;
> +     int channel = chan->channel;

Does this really add anything you save 6 chars.

<snip>

>       /*
>        * Phoenix provides 2 interrupt lines. The first one is connected to
>        * the OMAP. The other one can be connected to the other processor such
>        * as modem. Hence two separate ISR and IMR registers.
>        */
> -     madc->imr = (pdata->irq_line == 1) ?
> +     if (pdata)
> +             madc->use_second_irq = pdata->irq_line != 1;

Unconventional an unclear.

Stick the comparison in the if statement.

> +     else
> +             madc->use_second_irq = of_property_read_bool(np,
> +                                    "ti,system-uses-second-madc-irq");
> +
> +     madc->imr = (madc->use_second_irq == 1) ?

madc->imr = madc->use_second_irq ? <blah> : <blah>;

>           TWL4030_MADC_IMR1 : TWL4030_MADC_IMR2;
> -     madc->isr = (pdata->irq_line == 1) ?
> +     madc->isr = (madc->use_second_irq == 1) ?

Same here.

<snip>

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to