Remove the properties that are not used anymore by the at91_adc driver.
Also, stop using unit-addresses for the triggers as suggested by Mark
Rutland in
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-February/234184.html
Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
---
arch/arm/boot/dts/at91sam9x5.dtsi | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi
b/arch/arm/boot/dts/at91sam9x5.dtsi
index 174219de92fa..a535c905d9d4 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -627,35 +627,30 @@
atmel,adc-use-external;
atmel,adc-channels-used = <0xffff>;
atmel,adc-vref = <3300>;
- atmel,adc-num-channels = <12>;
atmel,adc-startup-time = <40>;
- atmel,adc-channel-base = <0x50>;
- atmel,adc-drdy-mask = <0x1000000>;
- atmel,adc-status-register = <0x30>;
- atmel,adc-trigger-register = <0xc0>;
atmel,adc-res = <8 10>;
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "highres";
- trigger@0 {
+ trigger0 {
trigger-name = "external-rising";
trigger-value = <0x1>;
trigger-external;
};
- trigger@1 {
+ trigger1 {
trigger-name = "external-falling";
trigger-value = <0x2>;
trigger-external;
};
- trigger@2 {
+ trigger2 {
trigger-name = "external-any";
trigger-value = <0x3>;
trigger-external;
};
- trigger@3 {
+ trigger3 {
trigger-name = "continuous";
trigger-value = <0x6>;
};
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
