This patch does the following cleanups:
- make some needlessly global functions static
- remove qlogicisp.h since it doesn't contain much
- remove the unused functions isp1020_abort and isp1020_reset
Please review especially the latter two points.
Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
---
This patch was already sent on:
- 15 Nov 2004
drivers/scsi/qlogicisp.c | 99 +++++++--------------------------------
drivers/scsi/qlogicisp.h | 69 ---------------------------
2 files changed, 20 insertions(+), 148 deletions(-)
--- linux-2.6.10-rc1-mm5-full/drivers/scsi/qlogicisp.h 2004-11-13
23:03:31.000000000 +0100
+++ /dev/null 2004-08-23 02:01:39.000000000 +0200
@@ -1,69 +0,0 @@
-/*
- * QLogic ISP1020 Intelligent SCSI Processor Driver (PCI)
- * Written by Erik H. Moe, [EMAIL PROTECTED]
- * Copyright 1995, Erik H. Moe
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/* Renamed and updated to 1.3.x by Michael Griffith <[EMAIL PROTECTED]> */
-
-/*
- * $Date: 1995/09/22 02:32:56 $
- * $Revision: 0.5 $
- *
- * $Log: isp1020.h,v $
- * Revision 0.5 1995/09/22 02:32:56 root
- * do auto request sense
- *
- * Revision 0.4 1995/08/07 04:48:28 root
- * supply firmware with driver.
- * numerous bug fixes/general cleanup of code.
- *
- * Revision 0.3 1995/07/16 16:17:16 root
- * added reset/abort code.
- *
- * Revision 0.2 1995/06/29 03:19:43 root
- * fixed biosparam.
- * added queue protocol.
- *
- * Revision 0.1 1995/06/25 01:56:13 root
- * Initial release.
- *
- */
-
-#ifndef _QLOGICISP_H
-#define _QLOGICISP_H
-
-/*
- * With the qlogic interface, every queue slot can hold a SCSI
- * command with up to 4 scatter/gather entries. If we need more
- * than 4 entries, continuation entries can be used that hold
- * another 7 entries each. Unlike for other drivers, this means
- * that the maximum number of scatter/gather entries we can
- * support at any given time is a function of the number of queue
- * slots available. That is, host->can_queue and host->sg_tablesize
- * are dynamic and _not_ independent. This all works fine because
- * requests are queued serially and the scatter/gather limit is
- * determined for each queue request anew.
- */
-#define QLOGICISP_REQ_QUEUE_LEN 63 /* must be power of two - 1 */
-#define QLOGICISP_MAX_SG(ql) (4 + ((ql) > 0) ? 7*((ql) - 1) : 0)
-
-int isp1020_detect(Scsi_Host_Template *);
-int isp1020_release(struct Scsi_Host *);
-const char * isp1020_info(struct Scsi_Host *);
-int isp1020_queuecommand(Scsi_Cmnd *, void (* done)(Scsi_Cmnd *));
-int isp1020_abort(Scsi_Cmnd *);
-int isp1020_reset(Scsi_Cmnd *, unsigned int);
-int isp1020_biosparam(struct scsi_device *, struct block_device *,
- sector_t, int[]);
-#endif /* _QLOGICISP_H */
--- linux-2.6.10-rc1-mm5-full/drivers/scsi/qlogicisp.c.old 2004-11-13
23:00:09.000000000 +0100
+++ linux-2.6.10-rc1-mm5-full/drivers/scsi/qlogicisp.c 2004-11-13
23:14:07.000000000 +0100
@@ -37,7 +37,21 @@
#include <asm/byteorder.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
-#include "qlogicisp.h"
+
+/*
+ * With the qlogic interface, every queue slot can hold a SCSI
+ * command with up to 4 scatter/gather entries. If we need more
+ * than 4 entries, continuation entries can be used that hold
+ * another 7 entries each. Unlike for other drivers, this means
+ * that the maximum number of scatter/gather entries we can
+ * support at any given time is a function of the number of queue
+ * slots available. That is, host->can_queue and host->sg_tablesize
+ * are dynamic and _not_ independent. This all works fine because
+ * requests are queued serially and the scatter/gather limit is
+ * determined for each queue request anew.
+ */
+#define QLOGICISP_REQ_QUEUE_LEN 63 /* must be power of two - 1 */
+#define QLOGICISP_MAX_SG(ql) (4 + ((ql) > 0) ? 7*((ql) - 1) : 0)
/* Configuration section *****************************************************/
@@ -655,7 +669,7 @@
}
-int isp1020_detect(Scsi_Host_Template *tmpt)
+static int isp1020_detect(Scsi_Host_Template *tmpt)
{
int hosts = 0;
struct Scsi_Host *host;
@@ -736,7 +750,7 @@
}
-int isp1020_release(struct Scsi_Host *host)
+static int isp1020_release(struct Scsi_Host *host)
{
struct isp1020_hostdata *hostdata;
@@ -757,7 +771,7 @@
}
-const char *isp1020_info(struct Scsi_Host *host)
+static const char *isp1020_info(struct Scsi_Host *host)
{
static char buf[80];
struct isp1020_hostdata *hostdata;
@@ -783,7 +797,7 @@
* interrupt handler may call this routine as part of
* request-completion handling).
*/
-int isp1020_queuecommand(Scsi_Cmnd *Cmnd, void (*done)(Scsi_Cmnd *))
+static int isp1020_queuecommand(Scsi_Cmnd *Cmnd, void (*done)(Scsi_Cmnd *))
{
int i, n, num_free;
u_int in_ptr, out_ptr;
@@ -1161,80 +1175,7 @@
}
-int isp1020_abort(Scsi_Cmnd *Cmnd)
-{
- u_short param[6];
- struct Scsi_Host *host;
- struct isp1020_hostdata *hostdata;
- int return_status = SCSI_ABORT_SUCCESS;
- u_int cmd_cookie;
- int i;
-
- ENTER("isp1020_abort");
-
- host = Cmnd->device->host;
- hostdata = (struct isp1020_hostdata *) host->hostdata;
-
- for (i = 0; i < QLOGICISP_REQ_QUEUE_LEN + 1; i++)
- if (hostdata->cmd_slots[i] == Cmnd)
- break;
- cmd_cookie = i;
-
- isp1020_disable_irqs(host);
-
- param[0] = MBOX_ABORT;
- param[1] = (((u_short) Cmnd->device->id) << 8) | Cmnd->device->lun;
- param[2] = cmd_cookie >> 16;
- param[3] = cmd_cookie & 0xffff;
-
- isp1020_mbox_command(host, param);
-
- if (param[0] != MBOX_COMMAND_COMPLETE) {
- printk("qlogicisp : scsi abort failure: %x\n", param[0]);
- return_status = SCSI_ABORT_ERROR;
- }
-
- isp1020_enable_irqs(host);
-
- LEAVE("isp1020_abort");
-
- return return_status;
-}
-
-
-int isp1020_reset(Scsi_Cmnd *Cmnd, unsigned int reset_flags)
-{
- u_short param[6];
- struct Scsi_Host *host;
- struct isp1020_hostdata *hostdata;
- int return_status = SCSI_RESET_SUCCESS;
-
- ENTER("isp1020_reset");
-
- host = Cmnd->device->host;
- hostdata = (struct isp1020_hostdata *) host->hostdata;
-
- param[0] = MBOX_BUS_RESET;
- param[1] = hostdata->host_param.bus_reset_delay;
-
- isp1020_disable_irqs(host);
-
- isp1020_mbox_command(host, param);
-
- if (param[0] != MBOX_COMMAND_COMPLETE) {
- printk("qlogicisp : scsi bus reset failure: %x\n", param[0]);
- return_status = SCSI_RESET_ERROR;
- }
-
- isp1020_enable_irqs(host);
-
- LEAVE("isp1020_reset");
-
- return return_status;
-}
-
-
-int isp1020_biosparam(struct scsi_device *sdev, struct block_device *n,
+static int isp1020_biosparam(struct scsi_device *sdev, struct block_device *n,
sector_t capacity, int ip[])
{
int size = capacity;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
