This converts twl4030-madc module to use the Industrial IO ADC
framework and adds device tree support.

Signed-off-by: Sebastian Reichel <s...@debian.org>
---
 drivers/mfd/twl4030-madc.c | 128 +++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 118 insertions(+), 10 deletions(-)

diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index 5458561..8d09abb 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -47,11 +47,14 @@
 #include <linux/gfp.h>
 #include <linux/err.h>
 
+#include <linux/iio/iio.h>
+
 /*
  * struct twl4030_madc_data - a container for madc info
  * @dev - pointer to device structure for madc
  * @lock - mutex protecting this data structure
  * @requests - Array of request struct corresponding to SW1, SW2 and RT
+ * @use_second_irq - IRQ selection (main or co-processor)
  * @imr - Interrupt mask register of MADC
  * @isr - Interrupt status register of MADC
  */
@@ -59,10 +62,73 @@ struct twl4030_madc_data {
        struct device *dev;
        struct mutex lock;      /* mutex protecting this data structure */
        struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS];
+       bool use_second_irq;
        int imr;
        int isr;
 };
 
+static int twl4030_madc_read(struct iio_dev *iio_dev,
+                            const struct iio_chan_spec *chan,
+                            int *val, int *val2, long mask)
+{
+       struct twl4030_madc_data *madc = iio_priv(iio_dev);
+       struct twl4030_madc_request req;
+       int ret;
+
+       req.method = madc->use_second_irq ? TWL4030_MADC_SW2 : TWL4030_MADC_SW1;
+
+       req.channels = BIT(chan->channel);
+       req.active = false;
+       req.func_cb = NULL;
+       req.type = TWL4030_MADC_WAIT;
+       req.raw = !(mask == IIO_CHAN_INFO_PROCESSED);
+       req.do_avg = (mask == IIO_CHAN_INFO_AVERAGE_RAW);
+
+       ret = twl4030_madc_conversion(&req);
+       if (ret < 0)
+               return ret;
+
+       *val = req.rbuf[chan->channel];
+
+       return IIO_VAL_INT;
+}
+
+static const struct iio_info twl4030_madc_iio_info = {
+       .read_raw = &twl4030_madc_read,
+       .driver_module = THIS_MODULE,
+};
+
+#define TWL4030_ADC_CHANNEL(_channel, _type, _name, _mask) {   \
+       .type = _type,                                  \
+       .channel = _channel,                            \
+       .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |  \
+                             BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \
+                             _mask,                    \
+       .datasheet_name = _name,                        \
+       .indexed = 1,                                   \
+}
+
+static const struct iio_chan_spec twl4030_madc_iio_channels[] = {
+       TWL4030_ADC_CHANNEL(0, IIO_VOLTAGE, "ADCIN0", 0),
+       TWL4030_ADC_CHANNEL(1, IIO_TEMP, "ADCIN1",
+               BIT(IIO_CHAN_INFO_PROCESSED)),
+       TWL4030_ADC_CHANNEL(2, IIO_VOLTAGE, "ADCIN2", 0),
+       TWL4030_ADC_CHANNEL(3, IIO_VOLTAGE, "ADCIN3", 0),
+       TWL4030_ADC_CHANNEL(4, IIO_VOLTAGE, "ADCIN4", 0),
+       TWL4030_ADC_CHANNEL(5, IIO_VOLTAGE, "ADCIN5", 0),
+       TWL4030_ADC_CHANNEL(6, IIO_VOLTAGE, "ADCIN6", 0),
+       TWL4030_ADC_CHANNEL(7, IIO_VOLTAGE, "ADCIN7", 0),
+       TWL4030_ADC_CHANNEL(8, IIO_VOLTAGE, "ADCIN8", 0),
+       TWL4030_ADC_CHANNEL(9, IIO_VOLTAGE, "ADCIN9", 0),
+       TWL4030_ADC_CHANNEL(10, IIO_CURRENT, "ADCIN10",
+               BIT(IIO_CHAN_INFO_PROCESSED)),
+       TWL4030_ADC_CHANNEL(11, IIO_VOLTAGE, "ADCIN11", 0),
+       TWL4030_ADC_CHANNEL(12, IIO_VOLTAGE, "ADCIN12", 0),
+       TWL4030_ADC_CHANNEL(13, IIO_VOLTAGE, "ADCIN13", 0),
+       TWL4030_ADC_CHANNEL(14, IIO_VOLTAGE, "ADCIN14", 0),
+       TWL4030_ADC_CHANNEL(15, IIO_VOLTAGE, "ADCIN15", 0),
+};
+
 static struct twl4030_madc_data *twl4030_madc;
 
 struct twl4030_prescale_divider_ratios {
@@ -702,28 +768,50 @@ static int twl4030_madc_probe(struct platform_device 
*pdev)
 {
        struct twl4030_madc_data *madc;
        struct twl4030_madc_platform_data *pdata = dev_get_platdata(&pdev->dev);
+       struct device_node *np = pdev->dev.of_node;
        int irq, ret;
        u8 regval;
+       struct iio_dev *iio_dev = NULL;
 
-       if (!pdata) {
-               dev_err(&pdev->dev, "platform_data not available\n");
+       if (!pdata && !np) {
+               dev_err(&pdev->dev, "neither platform data nor Device Tree node 
available\n");
                return -EINVAL;
        }
-       madc = devm_kzalloc(&pdev->dev, sizeof(*madc), GFP_KERNEL);
-       if (!madc)
+
+       iio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*madc));
+       if (!iio_dev) {
+               dev_err(&pdev->dev, "failed allocating iio device\n");
                return -ENOMEM;
+       }
 
+       madc = iio_priv(iio_dev);
        madc->dev = &pdev->dev;
+       madc->use_second_irq = false;
+
+       iio_dev->name = dev_name(&pdev->dev);
+       iio_dev->dev.parent = &pdev->dev;
+       iio_dev->dev.of_node = pdev->dev.of_node;
+       iio_dev->info = &twl4030_madc_iio_info;
+       iio_dev->modes = INDIO_DIRECT_MODE;
+       iio_dev->channels = twl4030_madc_iio_channels;
+       iio_dev->num_channels = ARRAY_SIZE(twl4030_madc_iio_channels);
 
        /*
         * Phoenix provides 2 interrupt lines. The first one is connected to
         * the OMAP. The other one can be connected to the other processor such
         * as modem. Hence two separate ISR and IMR registers.
         */
-       madc->imr = (pdata->irq_line == 1) ?
-           TWL4030_MADC_IMR1 : TWL4030_MADC_IMR2;
-       madc->isr = (pdata->irq_line == 1) ?
-           TWL4030_MADC_ISR1 : TWL4030_MADC_ISR2;
+       if (pdata && pdata->irq_line != 1)
+               madc->use_second_irq = true;
+       else if (!pdata)
+               madc->use_second_irq = of_property_read_bool(np,
+                                      "ti,system-uses-second-madc-irq");
+
+       madc->imr = madc->use_second_irq ? TWL4030_MADC_IMR2 :
+                                          TWL4030_MADC_IMR1;
+       madc->isr = madc->use_second_irq ? TWL4030_MADC_ISR2 :
+                                          TWL4030_MADC_ISR1;
+
        ret = twl4030_madc_set_power(madc, 1);
        if (ret < 0)
                return ret;
@@ -768,7 +856,7 @@ static int twl4030_madc_probe(struct platform_device *pdev)
                }
        }
 
-       platform_set_drvdata(pdev, madc);
+       platform_set_drvdata(pdev, iio_dev);
        mutex_init(&madc->lock);
 
        irq = platform_get_irq(pdev, 0);
@@ -780,7 +868,15 @@ static int twl4030_madc_probe(struct platform_device *pdev)
                goto err_i2c;
        }
        twl4030_madc = madc;
+
+       ret = iio_device_register(iio_dev);
+       if (ret) {
+               dev_dbg(&pdev->dev, "could not register iio device\n");
+               goto err_i2c;
+       }
+
        return 0;
+
 err_i2c:
        twl4030_madc_set_current_generator(madc, 0, 0);
 err_current_generator:
@@ -790,20 +886,32 @@ err_current_generator:
 
 static int twl4030_madc_remove(struct platform_device *pdev)
 {
-       struct twl4030_madc_data *madc = platform_get_drvdata(pdev);
+       struct iio_dev *iio_dev = platform_get_drvdata(pdev);
+       struct twl4030_madc_data *madc = iio_priv(iio_dev);
 
        twl4030_madc_set_current_generator(madc, 0, 0);
        twl4030_madc_set_power(madc, 0);
 
+       iio_device_unregister(iio_dev);
+
        return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id twl_madc_of_match[] = {
+       {.compatible = "ti,twl4030-madc", },
+       { },
+};
+MODULE_DEVICE_TABLE(of, twl_madc_of_match);
+#endif
+
 static struct platform_driver twl4030_madc_driver = {
        .probe = twl4030_madc_probe,
        .remove = twl4030_madc_remove,
        .driver = {
                   .name = "twl4030_madc",
                   .owner = THIS_MODULE,
+                  .of_match_table = of_match_ptr(twl_madc_of_match),
                   },
 };
 
-- 
1.9.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to