Add support for ARM Pl310 L2 cache controller parity error Signed-off-by: Punnaiah Choudary Kalluri <punn...@xilinx.com> --- .../devicetree/bindings/edac/pl310_edac_l2.txt | 19 ++ drivers/edac/Kconfig | 7 + drivers/edac/Makefile | 1 + drivers/edac/pl310_edac_l2.c | 236 ++++++++++++++++++++ 4 files changed, 263 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/edac/pl310_edac_l2.txt create mode 100644 drivers/edac/pl310_edac_l2.c
diff --git a/Documentation/devicetree/bindings/edac/pl310_edac_l2.txt b/Documentation/devicetree/bindings/edac/pl310_edac_l2.txt new file mode 100644 index 0000000..94fbb8d --- /dev/null +++ b/Documentation/devicetree/bindings/edac/pl310_edac_l2.txt @@ -0,0 +1,19 @@ +Pl310 L2 Cache EDAC driver, it does reports the data and tag ram parity errors. + +Required properties: +- compatible: Should be "arm,pl310-cache". +- intterupts: Interrupt number to the cpu. +- reg: Physical base address and size of cache controller's memory mapped + registers + +Example: +++++++++ + + L2: cache-controller { + compatible = "arm,pl310-cache"; + interrupts = <0 2 4>; + reg = <0xf8f02000 0x1000>; + }; + +PL310 L2 Cache EDAC driver detects the Parity enable state by reading the +appropriate control register. diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 878f090..059ac31 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -326,6 +326,13 @@ config EDAC_TILE Support for error detection and correction on the Tilera memory controller. +config EDAC_PL310_L2 + tristate "Pl310 L2 Cache Controller" + depends on EDAC_MM_EDAC && ARM + help + Support for parity error detection on L2 cache controller + data and tag ram memory + config EDAC_HIGHBANK_MC tristate "Highbank Memory Controller" depends on EDAC_MM_EDAC && ARCH_HIGHBANK diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index 4154ed6..179356f 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -64,3 +64,4 @@ obj-$(CONFIG_EDAC_OCTEON_PC) += octeon_edac-pc.o obj-$(CONFIG_EDAC_OCTEON_L2C) += octeon_edac-l2c.o obj-$(CONFIG_EDAC_OCTEON_LMC) += octeon_edac-lmc.o obj-$(CONFIG_EDAC_OCTEON_PCI) += octeon_edac-pci.o +obj-$(CONFIG_EDAC_PL310_L2) += pl310_edac_l2.o diff --git a/drivers/edac/pl310_edac_l2.c b/drivers/edac/pl310_edac_l2.c new file mode 100644 index 0000000..649371a --- /dev/null +++ b/drivers/edac/pl310_edac_l2.c @@ -0,0 +1,236 @@ +/* + * Pl310 L2 Cache EDAC Driver + * + * Copyright (C) 2013-2014 Xilinx, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/edac.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <asm/hardware/cache-l2x0.h> +#include "edac_core.h" + +/* Auxilary control register definitions */ +#define L2X0_AUX_CTRL_PARITY_MASK BIT(21) + +/* Interrupt imask/status/clear register definitions */ +#define L2X0_INTR_PARRD_MASK 0x4 +#define L2X0_INTR_PARRT_MASK 0x2 + +/** + * struct pl310_edac_l2_priv - Zynq L2 cache controller private instance data + * @base: Base address of the controller + * @irq: Interrupt number + */ +struct pl310_edac_l2_priv { + void __iomem *base; + int irq; +}; + +/** + * pl310_edac_l2_parityerr_check - Check controller staus for parity errors + * @dci: Pointer to the edac device controller instance + * + * This routine is used to check and post parity errors + */ +static void pl310_edac_l2_parityerr_check(struct edac_device_ctl_info *dci) +{ + struct pl310_edac_l2_priv *priv = dci->pvt_info; + u32 regval; + + regval = readl(priv->base + L2X0_RAW_INTR_STAT); + if (regval & L2X0_INTR_PARRD_MASK) { + /* Data parity error will be reported as correctable error */ + writel(L2X0_INTR_PARRD_MASK, priv->base + L2X0_INTR_CLEAR); + edac_device_handle_ce(dci, 0, 0, dci->ctl_name); + } + if (regval & L2X0_INTR_PARRT_MASK) { + /* tag parity error will be reported as uncorrectable error */ + writel(L2X0_INTR_PARRT_MASK, priv->base + L2X0_INTR_CLEAR); + edac_device_handle_ue(dci, 0, 0, dci->ctl_name); + } +} + +/** + * pl310_edac_l2_int_handler - ISR fucntion for l2cahe controller + * @irq: Irq Number + * @device: Pointer to the edac device controller instance + * + * This routine is triggered whenever there is parity error detected + * + * Return: Always returns IRQ_HANDLED + */ +static irqreturn_t pl310_edac_l2_int_handler(int irq, void *device) +{ + pl310_edac_l2_parityerr_check((struct edac_device_ctl_info *)device); + return IRQ_HANDLED; +} + +/** + * pl310_edac_l2_poll_handler - Poll the status reg for parity errors + * @dci: Pointer to the edac device controller instance + * + * This routine is used to check and post parity errors and is called by + * the EDAC polling thread + */ +static void pl310_edac_l2_poll_handler(struct edac_device_ctl_info *dci) +{ + pl310_edac_l2_parityerr_check(dci); +} + +/** + * pl310_edac_l2_get_paritystate - check the parity enable/disable status + * @base: Pointer to the contoller base address + * + * This routine returns the parity enable/diable status for the controller + * + * Return: true/false - parity enabled/disabled. + */ +static bool pl310_edac_l2_get_paritystate(void __iomem *base) +{ + u32 regval; + + regval = readl(base + L2X0_AUX_CTRL); + if (regval & L2X0_AUX_CTRL_PARITY_MASK) + return true; + + return false; +} + +/** + * pl310_edac_l2_probe - Check controller and bind driver + * @pdev: Pointer to the platform_device struct + * + * This routine probes a specific arm,pl310-cache instance for binding + * with the driver. + * + * Return: 0 if the controller instance was successfully bound to the + * driver; otherwise, < 0 on error. + */ +static int pl310_edac_l2_probe(struct platform_device *pdev) +{ + struct edac_device_ctl_info *dci; + struct pl310_edac_l2_priv *priv; + int rc; + struct resource *res; + void __iomem *baseaddr; + u32 regval; + + /* Get the data from the platform device */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + baseaddr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(baseaddr)) + return PTR_ERR(baseaddr); + + /* Check for the ecc enable status */ + if (pl310_edac_l2_get_paritystate(baseaddr) == false) { + dev_err(&pdev->dev, "parity check not enabled\n"); + return -ENXIO; + } + + dci = edac_device_alloc_ctl_info(sizeof(*priv), "l2cache", + 1, "L", 1, 1, NULL, 0, 0); + if (IS_ERR(dci)) + return PTR_ERR(dci); + + priv = dci->pvt_info; + priv->base = baseaddr; + dci->dev = &pdev->dev; + dci->mod_name = "pl310_edac_l2"; + dci->ctl_name = "pl310_l2_controller"; + dci->dev_name = dev_name(&pdev->dev); + + priv->irq = platform_get_irq(pdev, 0); + rc = devm_request_irq(&pdev->dev, priv->irq, + pl310_edac_l2_int_handler, + 0, dev_name(&pdev->dev), (void *)dci); + if (rc < 0) { + dci->edac_check = pl310_edac_l2_poll_handler; + edac_op_state = EDAC_OPSTATE_POLL; + } + + rc = edac_device_add_device(dci); + if (rc) { + dev_err(&pdev->dev, "failed to register with EDAC core\n"); + goto del_edac_device; + } + + if (edac_op_state != EDAC_OPSTATE_POLL) { + regval = readl(priv->base+L2X0_INTR_MASK); + regval |= (L2X0_INTR_PARRD_MASK | L2X0_INTR_PARRT_MASK); + writel(regval, priv->base+L2X0_INTR_MASK); + } + + return rc; + +del_edac_device: + edac_device_del_device(&pdev->dev); + edac_device_free_ctl_info(dci); + + return rc; +} + +/** + * pl310_edac_l2_remove - Unbind driver from controller + * @pdev: Pointer to the platform_device struct + * + * This routine unbinds the EDAC device controller instance associated + * with the specified arm,pl310-cache controller described by the + * OpenFirmware device tree node passed as a parameter. + * + * Return: Always returns 0 + */ +static int pl310_edac_l2_remove(struct platform_device *pdev) +{ + struct edac_device_ctl_info *dci = platform_get_drvdata(pdev); + struct pl310_edac_l2_priv *priv = dci->pvt_info; + u32 regval; + + if (edac_op_state != EDAC_OPSTATE_POLL) { + regval = readl(priv->base+L2X0_INTR_MASK); + regval &= ~(L2X0_INTR_PARRD_MASK | L2X0_INTR_PARRT_MASK); + writel(regval, priv->base+L2X0_INTR_MASK); + } + + edac_device_del_device(&pdev->dev); + edac_device_free_ctl_info(dci); + + return 0; +} + +/* Device tree node type and compatible tuples this driver can match on */ +static struct of_device_id pl310_edac_l2_match[] = { + { .compatible = "arm,pl310-cache", }, + { /* end of table */ } +}; + +MODULE_DEVICE_TABLE(of, pl310_edac_l2_match); + +static struct platform_driver pl310_edac_l2_driver = { + .driver = { + .name = "pl310-edac-l2", + .owner = THIS_MODULE, + .of_match_table = pl310_edac_l2_match, + }, + .probe = pl310_edac_l2_probe, + .remove = pl310_edac_l2_remove, +}; + +module_platform_driver(pl310_edac_l2_driver); + +MODULE_AUTHOR("Xilinx Inc."); +MODULE_DESCRIPTION("pl310 L2 EDAC driver"); +MODULE_LICENSE("GPL v2"); -- 1.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/