Adds LAB attributes to proper CPU0 node.
The lab-num-of-states attribute shows how many compartments will be used.
The LAB code is prepared to be more fine grained.
The lab-ctrl-freq defines how the LAB governor will be controlled:
- 0xFFFFFFFE - use the minimal frequency
- 0xFFFFFFFF - enable boost
- non zero - set the frequency specified
- zero - use ondemand to specify output frequency
Signed-off-by: Lukasz Majewski <l.majew...@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo....@samsung.com>
---
arch/arm/boot/dts/exynos4412-trats2.dts | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts
b/arch/arm/boot/dts/exynos4412-trats2.dts
index 4f851cc..9eeeb38 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -511,6 +511,35 @@
};
};
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ lab-num-of-states = <5>;
+ lab-ctrl-freq = < 0 0 0
1300000 1200000
+ 0 0 0 0
1300000
+ 0 0 0 0
0xFFFFFFFF
+ 0 0 0
0xFFFFFFFF 0xFFFFFFFF
+ 0xFFFFFFFE 0xFFFFFFFE 0xFFFFFFFE
0xFFFFFFFE 0xFFFFFFFE
+ >;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ };
+ };
+
camera {
pinctrl-0 = <&cam_port_b_clk_active>;
pinctrl-names = "default";
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
