On Tue, Mar 4, 2014 at 4:06 AM, Christian Riesch <christian.rie...@omicron.at> wrote: > [cc'ed netdev and davinci-linux-open-source] > > > --On March 03, 2014 19:39 -0500 Jon Ringle <j...@ringle.org> wrote: > >> On Mon, Mar 3, 2014 at 6:43 PM, Rafael J. Wysocki <r...@rjwysocki.net> >> wrote: >>> >>> On Monday, March 03, 2014 02:41:01 PM Jon Ringle wrote: >>>> >>>> I'm working on porting an ARM board from linux-3.10 to linux-3.12 (now >>>> the latest LTS kernel). >>>> I found that Ethernet controller on the board no longer comes up on >>>> linux-3.12. I was able to bisect the issue I'm having to the following >>>> commit: >>>> >>>> > 45f0a85c8258741d11bda25c0a5669c06267204a is the first bad commit >>>> > commit 45f0a85c8258741d11bda25c0a5669c06267204a >>>> > Author: Rafael J. Wysocki <rafael.j.wyso...@intel.com> >>>> > Date: Mon Jun 3 21:49:52 2013 +0200 >>>> > >>>> > PM / Runtime: Rework the "runtime idle" helper routine >>>> > >>>> > The "runtime idle" helper routine, rpm_idle(), currently ignores >>>> > return values from .runtime_idle() callbacks executed by it. >>>> > However, it turns out that many subsystems use >>>> > pm_generic_runtime_idle() which checks the return value of the >>>> > driver's callback and executes pm_runtime_suspend() for the >>>> > device unless that value is not 0. If that logic is moved to >>>> > rpm_idle() instead, pm_generic_runtime_idle() can be dropped >>>> > and its users will not need any .runtime_idle() callbacks any >>>> > more. >>>> > >>>> > Moreover, the PCI, SCSI, and SATA subsystems' .runtime_idle() >>>> > routines, pci_pm_runtime_idle(), scsi_runtime_idle(), and >>>> > ata_port_runtime_idle(), respectively, as well as a few drivers' >>>> > ones may be simplified if rpm_idle() calls rpm_suspend() after >>>> > 0 has been returned by the .runtime_idle() callback executed by >>>> > it. >>>> > >>>> > To reduce overall code bloat, make the changes described above. >>>> > >>>> > Tested-by: Mika Westerberg <mika.westerb...@linux.intel.com> >>>> > Tested-by: Kevin Hilman <khil...@linaro.org> >>>> > Signed-off-by: Rafael J. Wysocki <rafael.j.wyso...@intel.com> >>>> > Acked-by: Kevin Hilman <khil...@linaro.org> >>>> > Reviewed-by: Ulf Hansson <ulf.hans...@linaro.org> >>>> > Acked-by: Alan Stern <st...@rowland.harvard.edu> >>>> >>>> Can anyone offer any suggestions on what I should be looking for to >>>> fix this on my board? >>> >>> >>> Any pointers to the driver in question? >> >> >> drivers/net/ethernet/ti/davinci_emac.c >> > > Hi Jon, > I have successfully used the davinci_emac driver on a custom board with an > AM1808 SoC with Kernel 3.13 a few weeks ago. So at least 3.13 should work. > Did you try more recent kernel versions than 3.12?
I have not tried 3.13, but will do so today. Could I get a copy of your .config for comparison purposes? > > >> I also get the following output: >> >> Starting Network Manager Wait Online... >> [ 30.946509] davinci_mdio davinci_mdio.0: resetting idled controller >> [ 30.953220] net net0: attached PHY driver [Generic PHY] >> (mii_bus:phy_addr=davinci_mdio-0:00, id=7c0f1) >> [ 30.962938] IPv6: ADDRCONF(NETDEV_UP): net0: link is not ready >> [ 31.082087] genirq: Flags mismatch irq 33. 00000000 (net0) vs. >> 00000000 (net0) > > > Is it correct that this warning can only appear in case of shared > interrupts? See kernel/irq/manage.c. Since we don't use shared interrupts > here: Are you sure your board configuration is correct with regard to emac > interrupts? I added some additional printk's and see that emac_dev_open() seems to get called again and it is trying to call devm_request_irq() again for irq resources (33-36) and fails when trying to get irq 33: Starting Network Manager Wait Online... [ 30.687505] emac_dev_open: trying to get irq 33 [ 30.692314] emac_dev_open: got irq 33 [ 30.696034] emac_dev_open: trying to get irq 34 [ 30.700750] emac_dev_open: got irq 34 [ 30.704469] emac_dev_open: trying to get irq 35 [ 30.709088] emac_dev_open: got irq 35 [ 30.712887] emac_dev_open: trying to get irq 36 [ 30.717542] emac_dev_open: got irq 36 [ 30.721507] davinci_mdio davinci_mdio.0: resetting idled controller [ 30.728909] net net0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=davinci_mdio-0:00, id=7c0f1) [ 30.738614] IPv6: ADDRCONF(NETDEV_UP): net0: link is not ready [ 30.847040] emac_dev_open: trying to get irq 33 [ 30.851809] genirq: Flags mismatch irq 33. 00000000 (net0) vs. 00000000 (net0) [ 30.859125] CPU: 0 PID: 677 Comm: NetworkManager Not tainted 3.12.13-fs1-003-g5ae24fe-dirty+ #1234 [ 30.868261] [<c000d9c4>] (unwind_backtrace+0x0/0x128) from [<c000be14>] (show_stack+0x10/0x14) [ 30.877020] [<c000be14>] (show_stack+0x10/0x14) from [<c0046970>] (__setup_irq+0x45c/0x4d4) [ 30.885499] [<c0046970>] (__setup_irq+0x45c/0x4d4) from [<c0046b18>] (request_threaded_irq+0xa4/0x130) [ 30.894935] [<c0046b18>] (request_threaded_irq+0xa4/0x130) from [<c00484e0>] (devm_request_threaded_irq+0x50/0x98) [ 30.905414] [<c00484e0>] (devm_request_threaded_irq+0x50/0x98) from [<c02db4b4>] (emac_dev_open+0x3f4/0x4b8) [ 30.915364] [<c02db4b4>] (emac_dev_open+0x3f4/0x4b8) from [<c0367b40>] (__dev_open+0xc0/0x130) [ 30.924086] [<c0367b40>] (__dev_open+0xc0/0x130) from [<c0367dc4>] (__dev_change_flags+0x90/0x148) [ 30.933154] [<c0367dc4>] (__dev_change_flags+0x90/0x148) from [<c0367f04>] (dev_change_flags+0x10/0x48) [ 30.942679] [<c0367f04>] (dev_change_flags+0x10/0x48) from [<c0374510>] (do_setlink+0x2fc/0x838) [ 30.951591] [<c0374510>] (do_setlink+0x2fc/0x838) from [<c0374dec>] (rtnl_newlink+0x2b4/0x458) [ 30.960328] [<c0374dec>] (rtnl_newlink+0x2b4/0x458) from [<c03740b8>] (rtnetlink_rcv_msg+0x168/0x210) [ 30.969692] [<c03740b8>] (rtnetlink_rcv_msg+0x168/0x210) from [<c037f50c>] (netlink_rcv_skb+0xac/0xc0) [ 30.979130] [<c037f50c>] (netlink_rcv_skb+0xac/0xc0) from [<c0373f40>] (rtnetlink_rcv+0x1c/0x2c) [ 30.988040] [<c0373f40>] (rtnetlink_rcv+0x1c/0x2c) from [<c037ee94>] (netlink_unicast+0x138/0x1e8) [ 30.997122] [<c037ee94>] (netlink_unicast+0x138/0x1e8) from [<c037f2a4>] (netlink_sendmsg+0x2bc/0x37c) [ 31.006552] [<c037f2a4>] (netlink_sendmsg+0x2bc/0x37c) from [<c0351f50>] (sock_sendmsg+0x84/0xa8) [ 31.015546] [<c0351f50>] (sock_sendmsg+0x84/0xa8) from [<c035338c>] (___sys_sendmsg.part.35+0x268/0x278) [ 31.025150] [<c035338c>] (___sys_sendmsg.part.35+0x268/0x278) from [<c03542e8>] (__sys_sendmsg+0x4c/0x7c) [ ) from [<c0009560>] (ret_fast_syscall+0x0/0x2c) [ 31.043691] genirq: out_mask [ 31.046723] genirq: out_thread [ 31.049820] genirq: out_mput [ 31.052825] net net0: DaVinci EMAC: devm_request_irq() failed > Is your configuration using device tree or not (my configuration > is a none-devicetree one)? No. > I also wonder why your network device is net0, on > my board it's eth0, maybe this triggers some bug? I doubt that this is the source of the problem. The davinci_emac interface is initiatially eth1 (we have a 2nd ethernet port on board that initially is assigned eth0), I rename them eth1 -> net0 and eth0 -> net1. See http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/ Jon -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/