On Wed, Mar 5, 2014 at 6:37 AM, Jon Ringle <jrin...@gridpoint.com> wrote: > > > On Wed, 5 Mar 2014, Greg KH wrote: > >> On Tue, Mar 04, 2014 at 07:01:49PM -0500, Jon Ringle wrote: >> > +config CC_OPTIMIZE_FOR_SPEED >> > + bool "Optimze for speed (-O3)" >> > + help >> > + Enabling this option will pass "-O3" to gcc >> > + resulting in a larger kernel (but possibly faster) >> >> Are you sure about that? Have you measured it? > > I do know that there is an improvement performance-wise for my particular > use-case. > > My target is an ARM board being built with gcc-4.8.2. My board has on it a > sc16is740 that is used as an RS-485 port. The sc16is740 is on the i2c bus, > so when an interrupt comes in to indicate that there is data available to > be read, I need to get the data over the i2c bus. I do this on a kthread > to do this work. The i2c transactions (using i2c-davinci driver) are also > interrupt driven. I was seeing a lot of lost packets when receiving data > at only 19200. Adding the -O3 compile option helped in this regard in that > I am now rarely seeing packet loss.
Please also see: http://www.gossamer-threads.com/lists/linux/kernel/1835761?do=post_view_threaded#1835761 -- Thanks, //richard -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
