From: Srinivas Kandagatla <srinivas.kandaga...@st.com>

This patch adds support to rev E board of B2020 which has few minor
changes :
        PHY reset PIO (Change from PIO30 to PIO07)
        Power LED(Green) Control(Change from PIO47 to PIO13)

Acked-by: Lee Jones <lee.jo...@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@st.com>
---
 arch/arm/boot/dts/Makefile               |  3 ++-
 arch/arm/boot/dts/stih416-b2020-revE.dts | 36 ++++++++++++++++++++++++++++++++
 2 files changed, 38 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/stih416-b2020-revE.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0320303..325218a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -278,7 +278,8 @@ dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
 dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \
        stih416-b2000.dtb \
        stih415-b2020.dtb \
-       stih416-b2020.dtb
+       stih416-b2020.dtb \
+       stih416-b2020-revE.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += \
        sun4i-a10-a1000.dtb \
        sun4i-a10-cubieboard.dtb \
diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts 
b/arch/arm/boot/dts/stih416-b2020-revE.dts
new file mode 100644
index 0000000..bcb9d00
--- /dev/null
+++ b/arch/arm/boot/dts/stih416-b2020-revE.dts
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandaga...@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih416.dtsi"
+#include "stih41x-b2020.dtsi"
+/ {
+        model = "STih416 B2020 REV. E";
+       compatible = "st,stih416", "st,stih416-b2020";
+
+       soc {
+
+               leds {
+                       compatible      = "gpio-leds";
+                       red {
+                               #gpio-cells = <1>;
+                               label   = "Front Panel LED";
+                               gpios   = <&PIO4 1>;
+                               linux,default-trigger   = "heartbeat";
+                       };
+                       green {
+                               gpios   = <&PIO1 3>;
+                               default-state = "off";
+                       };
+               };
+
+               ethernet1: ethernet@fef08000 {
+                       snps,reset-gpio         = <&PIO0 7>;
+               };
+       };
+};
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to