Richard Purdie provided a patch to fix support for XScale1 processors
(this is the PMU version i never had access to initially), we weren't
clearing the overflow flags after an overflow interrupt had triggered
resulting in no additional interrupts occuring. Additionally i've added
basic power management support.
Signed-off-by: Zwane Mwaikambo <[EMAIL PROTECTED]>
===== arch/arm/oprofile/op_arm_model.h 1.1 vs edited =====
--- 1.1/arch/arm/oprofile/op_arm_model.h 2004-04-12 11:55:34 -06:00
+++ edited/arch/arm/oprofile/op_arm_model.h 2005-02-08 23:02:20 -07:00
@@ -24,6 +24,6 @@ struct op_arm_model_spec {
extern struct op_arm_model_spec op_xscale_spec;
#endif
-extern int pmu_init(struct oprofile_operations **ops, struct op_arm_model_spec
*spec);
+extern int __init pmu_init(struct oprofile_operations *ops, struct
op_arm_model_spec *spec);
extern void pmu_exit(void);
#endif /* OP_ARM_MODEL_H */
===== arch/arm/oprofile/common.c 1.3 vs edited =====
--- 1.3/arch/arm/oprofile/common.c 2005-01-25 14:43:48 -07:00
+++ edited/arch/arm/oprofile/common.c 2005-02-08 23:00:50 -07:00
@@ -11,6 +11,7 @@
#include <linux/oprofile.h>
#include <linux/errno.h>
#include <asm/semaphore.h>
+#include <linux/sysdev.h>
#include "op_counter.h"
#include "op_arm_model.h"
@@ -25,6 +26,26 @@ static void pmu_stop(void);
static int pmu_create_files(struct super_block *, struct dentry *);
#ifdef CONFIG_PM
+static int pmu_suspend(struct sys_device *dev, u32 state)
+{
+ if (pmu_enabled)
+ pmu_stop();
+ return 0;
+}
+
+static int pmu_resume(struct sys_device *dev)
+{
+ if (pmu_enabled)
+ pmu_start();
+ return 0;
+}
+
+static struct sysdev_class oprofile_sysclass = {
+ set_kset_name("oprofile"),
+ .resume = pmu_resume,
+ .suspend = pmu_suspend,
+};
+
static struct sys_device device_oprofile = {
.id = 0,
.cls = &oprofile_sysclass,
@@ -35,14 +56,14 @@ static int __init init_driverfs(void)
int ret;
if (!(ret = sysdev_class_register(&oprofile_sysclass)))
- ret = sys_device_register(&device_oprofile);
+ ret = sysdev_register(&device_oprofile);
return ret;
}
-static void __exit exit_driverfs(void)
+static void exit_driverfs(void)
{
- sys_device_unregister(&device_oprofile);
+ sysdev_unregister(&device_oprofile);
sysdev_class_unregister(&oprofile_sysclass);
}
#else
@@ -105,8 +126,7 @@ static void pmu_stop(void)
up(&pmu_sem);
}
-int __init
-pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec)
+int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec
*spec)
{
init_MUTEX(&pmu_sem);
===== arch/arm/oprofile/op_model_xscale.c 1.7 vs edited =====
--- 1.7/arch/arm/oprofile/op_model_xscale.c 2005-01-04 19:48:24 -07:00
+++ edited/arch/arm/oprofile/op_model_xscale.c 2005-02-09 21:50:49 -07:00
@@ -42,6 +42,9 @@
#ifdef CONFIG_ARCH_IOP331
#define XSCALE_PMU_IRQ IRQ_IOP331_CORE_PMU
#endif
+#ifdef CONFIG_ARCH_PXA
+#define XSCALE_PMU_IRQ IRQ_PMU
+#endif
/*
* Different types of events that can be counted by the XScale PMU
@@ -305,9 +308,9 @@ static void inline __xsc1_check_ctrs(voi
/* Overflow bit gets cleared. There's no workaround. */
/* Fixed in B stepping or later */
- pmnc &= ~(PMU_ENABLE | pmu->cnt_ovf[PMN0] | pmu->cnt_ovf[PMN1] |
- pmu->cnt_ovf[CCNT]);
- write_pmnc(pmnc);
+ /* Write the value back to clear the overflow flags. Overflow */
+ /* flags remain in pmnc for use below */
+ write_pmnc(pmnc & ~PMU_ENABLE);
for (i = CCNT; i <= PMN1; i++) {
if (!(pmu->int_mask[i] & pmu->int_enable))
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
