On Fri, Feb 21, 2014 at 2:09 PM, Kees Cook <keesc...@chromium.org> wrote: > On Fri, Feb 21, 2014 at 5:20 AM, Russell King - ARM Linux > <li...@arm.linux.org.uk> wrote: >> On Fri, Feb 21, 2014 at 12:37:04PM +0000, Dave Martin wrote: >>> It would be good if someone who's more familiar with the parms and >>> vmlinux.lds stuff could take a look at it, though I don't see any >>> obvious problem yet. >> >> The biggest issue with it is that we end up with: >> >> - the .text section rounded up to 1MB >> - the .rodata section rounded up to 1MB >> >> That means we can end up wasting up to 1MB of memory for each (in the >> worst case where we encroach into the next 1MB aligned region by a few >> bytes) and this memory can't be re-used. >> >> The alternative is to adjust the maps such that we end up mapping the >> .text / .rodata overlap 1MB using 4K pages, taking the additional TLB >> hit by doing so. >> >> The .text is aligned to 1MB, so the majority of the first 0x8000 to >> 0x100000 is unused. The end of the .text section is aligned to 1MB, >> and the start of the .data section is also aligned to 1MB. >> >> So, the minimum kernel size is: 0x100000 + MB_ALIGN(sizeof(.text)) + >> MB_ALIGN(sizeof(.rodata)) + MB_ALIGN(sizeof(init sections)) + sizeof(.data) >> - 0x8000 >> >> So, looking at this kernel I've recently built: >> >> Idx Name Size VMA LMA File off Algn >> 0 .head.text 00000204 c0008000 c0008000 00008000 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, CODE >> >> --- .text this gets set to 0xc0100000, we lose 0xc0008240 to 0xc0100000 >> >> 1 .text 006c4530 c0008240 c0008240 00008240 2**6 >> CONTENTS, ALLOC, LOAD, READONLY, CODE >> 2 .text.head 0000004c c06cc770 c06cc770 006cc770 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, CODE >> >> --- sizeof(.text) + sizeof(.text.head) becomes 0x700000 >> --- .rodata starts at 0xc0800000 instead of 0xc06cd000 >> >> 3 .rodata 0022f568 c06cd000 c06cd000 006cd000 2**6 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 4 __bug_table 0000873c c08fc568 c08fc568 008fc568 2**0 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 5 .pci_fixup 00000030 c0904ca4 c0904ca4 00904ca4 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 6 __ksymtab 00008158 c0904cd4 c0904cd4 00904cd4 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 7 __ksymtab_gpl 00006858 c090ce2c c090ce2c 0090ce2c 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 8 __kcrctab 000040ac c0913684 c0913684 00913684 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 9 __kcrctab_gpl 0000342c c0917730 c0917730 00917730 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 10 __ksymtab_strings 00022a08 c091ab5c c091ab5c 0091ab5c 2**0 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 11 __param 00000c70 c093d564 c093d564 0093d564 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 12 __modver 00000e2c c093e1d4 c093e1d4 0093e1d4 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 13 __ex_table 00000f18 c093f000 c093f000 0093f000 2**3 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 14 .notes 00000024 c093ff18 c093ff18 0093ff18 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, CODE >> 15 .vectors 00000020 00000000 c0940000 00940000 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, CODE >> 16 .stubs 00000240 00001000 c0940020 00941000 2**5 >> CONTENTS, ALLOC, LOAD, READONLY, CODE >> 17 .init.text 00051760 c0940260 c0940260 00948260 2**5 >> CONTENTS, ALLOC, LOAD, READONLY, CODE >> 18 .exit.text 00002130 c09919c0 c09919c0 009999c0 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, CODE >> 19 .init.arch.info 00000108 c0993af0 c0993af0 0099baf0 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 20 .init.tagtable 00000048 c0993bf8 c0993bf8 0099bbf8 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 21 .init.smpalt 000032f8 c0993c40 c0993c40 0099bc40 2**2 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 22 .init.pv_table 00000314 c0996f38 c0996f38 0099ef38 2**0 >> CONTENTS, ALLOC, LOAD, READONLY, DATA >> 23 .init.data 0000c19c c0997250 c0997250 0099f250 2**3 >> CONTENTS, ALLOC, LOAD, DATA >> 24 .data..percpu 000035c0 c09a4000 c09a4000 009ac000 2**6 >> CONTENTS, ALLOC, LOAD, DATA >> >> --- sizeof previous sections is 0x2db000, which becomes 0x300000 >> --- start of .data becomes 0xc0b00000 instead of 0xc09a8000 >> >> 25 .data 00062728 c09a8000 c09a8000 009b0000 2**6 >> CONTENTS, ALLOC, LOAD, DATA >> 26 .bss 00754870 c0a0a740 c0a0a740 00a12728 2**6 >> ALLOC >> >> --- which means the kernel image finishes at 0xC12B6FB0 whereas it used >> to finish at 0xC115EFB0. >> >> 27 .comment 00000011 00000000 00000000 00a12728 2**0 >> CONTENTS, READONLY >> 28 .ARM.attributes 00000010 00000000 00000000 00a12739 2**0 >> CONTENTS, READONLY >> >> That's almost 1.5MB larger on an image size of 18MB. Percentage wise, >> that sounds small, but the thing to realise is that growth is independent >> of the image size, so a smaller image sees a larger %age wise growth in >> its size. >> >> People have already complained bitterly when I've said that stealing >> memory and taking out out of memblock should always be 1MB aligned, so >> /no one/ has the right to say "it's only 1.5MB, it doesn't matter" >> because quite frankly they should've been saying that and supporting me >> with the memblock issue. So, I really don't want to hear that argument! > > Absolutely, the memory waste is a problem. This is why I made sure to > leave the rodata as a separate config item. It seems like if people > want this feature, the cost is either going to be this kind of > alignment loss, or TLB hit switching to 4K pages. It seems like the > latter is significantly more "costly". Regardless, that's why it's all > behind config options. > >> However, if you look at where these boundaries are placed, they're not >> quite in the right place. For example, the .init.data section is writable, >> and so should be grouped with the .data section. So should .data..percpu. >> >> Now, a few other things stand out from the above: >> >> (a) .text.head - imx, sunxi and tegra need to fix that. There is no >> specific meaning to it. >> >> (b) .init.text is executable, and can't be in a NX region when it's >> set as non-executable. >> >> (c) we can't free the .init sections (sections 15 through up to and >> including 23) anymore with this feature enabled because it's setup >> as read-only memory. > > Perhaps I've misunderstood something, but I don't think b) and c) or > the comments about .init.data and .data..percpu are problems for this > series because of when the mapping happens. Until init finishes, these > sections are fully RXW. Only after init is done is the init section > made NX.
I haven't heard anything back, and I think I've answered the questions raised. Since these changes are behind CONFIG items, other folks have successfully tested the series, and at least Google, Linaro, and the codeaurora folks are interested in these features, can I send these to the patch tracker? Thanks, -Kees -- Kees Cook Chrome OS Security -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
