This patch use common ppmu driver of exynos_ppmu.c driver instead of individual
function related to PPC because PPMU is integrated module with both PPC and
Bus event generator. When using PPMU to get bus performance read/write event,
exynos4_bus.c don't need to consider memory type.

And get ppmu address from dt data by using dt helper function (of_iomap).
And then this patch delete duplicate defined structure/enum.

For example,
busfreq@106A0000 {
        compatible = "samsung,exynos4x12-busfreq";
        reg = <0x106A0000 0x2000>, <0x106B0000 0x2000>;
        regs-name = "PPMU_DMC0", "PPMU_DMC1";
};

Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com>
---
 drivers/devfreq/exynos/Makefile      |   2 +-
 drivers/devfreq/exynos/exynos4_bus.c | 234 +++++++++++++++++++----------------
 2 files changed, 129 insertions(+), 107 deletions(-)

diff --git a/drivers/devfreq/exynos/Makefile b/drivers/devfreq/exynos/Makefile
index bfaaf5b..49bc917 100644
--- a/drivers/devfreq/exynos/Makefile
+++ b/drivers/devfreq/exynos/Makefile
@@ -1,3 +1,3 @@
 # Exynos DEVFREQ Drivers
-obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ)  += exynos4_bus.o
+obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ)  += exynos_ppmu.o exynos4_bus.o
 obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ)  += exynos_ppmu.o exynos5_bus.o
diff --git a/drivers/devfreq/exynos/exynos4_bus.c 
b/drivers/devfreq/exynos/exynos4_bus.c
index 2d2b44b..8ccbb31 100644
--- a/drivers/devfreq/exynos/exynos4_bus.c
+++ b/drivers/devfreq/exynos/exynos4_bus.c
@@ -24,17 +24,19 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/module.h>
 
+#include <mach/map.h>
+
+#include "exynos_ppmu.h"
+#include "exynos4_bus.h"
+
 /* Exynos4 ASV has been in the mailing list, but not upstreamed, yet. */
 #ifdef CONFIG_EXYNOS_ASV
 extern unsigned int exynos_result_of_asv;
 #endif
 
-#include <mach/map.h>
-
-#include "exynos4_bus.h"
-
 #define MAX_SAFEVOLT   1200000 /* 1.2V */
 
 enum exynos4_busf_type {
@@ -45,22 +47,6 @@ enum exynos4_busf_type {
 /* Assume that the bus is saturated if the utilization is 40% */
 #define BUS_SATURATION_RATIO   40
 
-enum ppmu_counter {
-       PPMU_PMNCNT0 = 0,
-       PPMU_PMCCNT1,
-       PPMU_PMNCNT2,
-       PPMU_PMNCNT3,
-       PPMU_PMNCNT_MAX,
-};
-struct exynos4_ppmu {
-       void __iomem *hw_base;
-       unsigned int ccnt;
-       unsigned int event;
-       unsigned int count[PPMU_PMNCNT_MAX];
-       bool ccnt_overflow;
-       bool count_overflow[PPMU_PMNCNT_MAX];
-};
-
 enum busclk_level_idx {
        LV_0 = 0,
        LV_1,
@@ -69,6 +55,13 @@ enum busclk_level_idx {
        LV_4,
        _LV_END
 };
+
+enum exynos_ppmu_idx {
+       PPMU_DMC0,
+       PPMU_DMC1,
+       PPMU_END,
+};
+
 #define EX4210_LV_MAX  LV_2
 #define EX4x12_LV_MAX  LV_4
 #define EX4210_LV_NUM  (LV_2 + 1)
@@ -92,7 +85,7 @@ struct busfreq_data {
        struct regulator *vdd_int;
        struct regulator *vdd_mif; /* Exynos4412/4212 only */
        struct busfreq_opp_info curr_oppinfo;
-       struct exynos4_ppmu dmc[2];
+       struct exynos_ppmu ppmu[PPMU_END];
 
        struct notifier_block pm_notifier;
        struct mutex lock;
@@ -102,12 +95,6 @@ struct busfreq_data {
        unsigned int top_divtable[_LV_END];
 };
 
-struct bus_opp_table {
-       unsigned int idx;
-       unsigned long clk;
-       unsigned long volt;
-};
-
 /* 4210 controls clock of mif and voltage of int */
 static struct bus_opp_table exynos4210_busclk_table[] = {
        {LV_0, 400000, 1150000},
@@ -525,27 +512,22 @@ static int exynos4x12_set_busclk(struct busfreq_data 
*data,
        return 0;
 }
 
-
 static void busfreq_mon_reset(struct busfreq_data *data)
 {
        unsigned int i;
 
-       for (i = 0; i < 2; i++) {
-               void __iomem *ppmu_base = data->dmc[i].hw_base;
+       for (i = 0; i < PPMU_END; i++) {
+               void __iomem *ppmu_base = data->ppmu[i].hw_base;
 
-               /* Reset PPMU */
-               __raw_writel(0x8000000f, ppmu_base + 0xf010);
-               __raw_writel(0x8000000f, ppmu_base + 0xf050);
-               __raw_writel(0x6, ppmu_base + 0xf000);
-               __raw_writel(0x0, ppmu_base + 0xf100);
+               /* Reset the performance and cycle counters */
+               exynos_ppmu_reset(ppmu_base);
 
-               /* Set PPMU Event */
-               data->dmc[i].event = 0x6;
-               __raw_writel(((data->dmc[i].event << 12) | 0x1),
-                            ppmu_base + 0xfc);
+               /* Setup count registers to monitor read/write transactions */
+               data->ppmu[i].event[PPMU_PMNCNT3] = RDWR_DATA_COUNT;
+               exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT3,
+                                       data->ppmu[i].event[PPMU_PMNCNT3]);
 
-               /* Start PPMU */
-               __raw_writel(0x1, ppmu_base + 0xf000);
+               exynos_ppmu_start(ppmu_base);
        }
 }
 
@@ -553,23 +535,20 @@ static void exynos4_read_ppmu(struct busfreq_data *data)
 {
        int i, j;
 
-       for (i = 0; i < 2; i++) {
-               void __iomem *ppmu_base = data->dmc[i].hw_base;
-               u32 overflow;
+       for (i = 0; i < PPMU_END; i++) {
+               void __iomem *ppmu_base = data->ppmu[i].hw_base;
 
-               /* Stop PPMU */
-               __raw_writel(0x0, ppmu_base + 0xf000);
+               exynos_ppmu_stop(ppmu_base);
 
                /* Update local data from PPMU */
-               overflow = __raw_readl(ppmu_base + 0xf050);
-
-               data->dmc[i].ccnt = __raw_readl(ppmu_base + 0xf100);
-               data->dmc[i].ccnt_overflow = overflow & (1 << 31);
-
-               for (j = 0; j < PPMU_PMNCNT_MAX; j++) {
-                       data->dmc[i].count[j] = __raw_readl(
-                                       ppmu_base + (0xf110 + (0x10 * j)));
-                       data->dmc[i].count_overflow[j] = overflow & (1 << j);
+               data->ppmu[i].ccnt = __raw_readl(ppmu_base + PPMU_CCNT);
+
+               for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
+                       if (data->ppmu[i].event[j] == 0)
+                               data->ppmu[i].count[j] = 0;
+                       else
+                               data->ppmu[i].count[j] =
+                                       exynos_ppmu_read(ppmu_base, j);
                }
        }
 
@@ -699,66 +678,42 @@ out:
        return err;
 }
 
-static int exynos4_get_busier_dmc(struct busfreq_data *data)
+static int exynos4_get_busier_ppmu(struct busfreq_data *data)
 {
-       u64 p0 = data->dmc[0].count[0];
-       u64 p1 = data->dmc[1].count[0];
-
-       p0 *= data->dmc[1].ccnt;
-       p1 *= data->dmc[0].ccnt;
-
-       if (data->dmc[1].ccnt == 0)
-               return 0;
+       int i, j;
+       int busy = 0;
+       unsigned int temp = 0;
+
+       for (i = 0; i < PPMU_END; i++) {
+               for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
+                       if (data->ppmu[i].count[j] > temp) {
+                               temp = data->ppmu[i].count[j];
+                               busy = i;
+                       }
+               }
+       }
 
-       if (p0 > p1)
-               return 0;
-       return 1;
+       return busy;
 }
 
 static int exynos4_bus_get_dev_status(struct device *dev,
                                      struct devfreq_dev_status *stat)
 {
        struct busfreq_data *data = dev_get_drvdata(dev);
-       int busier_dmc;
-       int cycles_x2 = 2; /* 2 x cycles */
-       void __iomem *addr;
-       u32 timing;
-       u32 memctrl;
+       int busier;
 
        exynos4_read_ppmu(data);
-       busier_dmc = exynos4_get_busier_dmc(data);
+       busier = exynos4_get_busier_ppmu(data);
        stat->current_frequency = data->curr_oppinfo.rate;
 
-       if (busier_dmc)
-               addr = S5P_VA_DMC1;
-       else
-               addr = S5P_VA_DMC0;
-
-       memctrl = __raw_readl(addr + 0x04); /* one of DDR2/3/LPDDR2 */
-       timing = __raw_readl(addr + 0x38); /* CL or WL/RL values */
-
-       switch ((memctrl >> 8) & 0xf) {
-       case 0x4: /* DDR2 */
-               cycles_x2 = ((timing >> 16) & 0xf) * 2;
-               break;
-       case 0x5: /* LPDDR2 */
-       case 0x6: /* DDR3 */
-               cycles_x2 = ((timing >> 8) & 0xf) + ((timing >> 0) & 0xf);
-               break;
-       default:
-               pr_err("%s: Unknown Memory Type(%d).\n", __func__,
-                      (memctrl >> 8) & 0xf);
-               return -EINVAL;
-       }
-
        /* Number of cycles spent on memory access */
-       stat->busy_time = data->dmc[busier_dmc].count[0] / 2 * (cycles_x2 + 2);
+       stat->busy_time = data->ppmu[busier].count[PPMU_PMNCNT3];
        stat->busy_time *= 100 / BUS_SATURATION_RATIO;
-       stat->total_time = data->dmc[busier_dmc].ccnt;
+       stat->total_time = data->ppmu[busier].ccnt;
 
        /* If the counters have overflown, retry */
-       if (data->dmc[busier_dmc].ccnt_overflow ||
-           data->dmc[busier_dmc].count_overflow[0])
+       if (data->ppmu[busier].ccnt_overflow ||
+           data->ppmu[busier].count_overflow[0])
                return -EAGAIN;
 
        return 0;
@@ -766,6 +721,13 @@ static int exynos4_bus_get_dev_status(struct device *dev,
 
 static void exynos4_bus_exit(struct device *dev)
 {
+       struct busfreq_data *data = dev_get_drvdata(dev);
+       int i;
+
+       for (i = 0; i < PPMU_END; i++) {
+               if (data->ppmu[i].hw_base)
+                       iounmap(data->ppmu[i].hw_base);
+       }
 }
 
 static struct devfreq_dev_profile exynos4_devfreq_profile = {
@@ -1025,6 +987,39 @@ static struct of_device_id exynos4_busfreq_id_match[] = {
        },
 };
 
+static int exynos4_busfreq_parse_dt(struct busfreq_data *data)
+{
+       struct device *dev = data->dev;
+       struct device_node *np = dev->of_node;
+       int i, ret;
+
+       if (!np) {
+               dev_err(dev, "Failed to find devicetree node\n");
+               return -EINVAL;
+       }
+
+       /* Maps the memory mapped IO to control PPMU register */
+       for (i = 0; i < PPMU_END; i++) {
+               data->ppmu[i].hw_base = of_iomap(np, i);
+               if (IS_ERR_OR_NULL(data->ppmu[i].hw_base)) {
+                       dev_err(dev, "Failed to map memory region\n");
+                       data->ppmu[i].hw_base = NULL;
+                       ret = -EINVAL;
+                       goto err_iomap;
+               }
+       }
+
+       return 0;
+
+err_iomap:
+       for (i = 0; i < PPMU_END; i++) {
+               if (data->ppmu[i].hw_base)
+                       iounmap(data->ppmu[i].hw_base);
+       }
+
+       return ret;
+}
+
 static int exynos4_busfreq_get_driver_data(struct platform_device *pdev)
 {
        struct device *dev = &pdev->dev;
@@ -1042,7 +1037,7 @@ static int exynos4_busfreq_probe(struct platform_device 
*pdev)
        struct busfreq_data *data;
        struct dev_pm_opp *opp;
        struct device *dev = &pdev->dev;
-       int err = 0;
+       int i, err = 0;
 
        data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data), 
GFP_KERNEL);
        if (data == NULL) {
@@ -1051,10 +1046,16 @@ static int exynos4_busfreq_probe(struct platform_device 
*pdev)
        }
 
        data->type = exynos4_busfreq_get_driver_data(pdev);
-       data->dmc[0].hw_base = S5P_VA_DMC0;
-       data->dmc[1].hw_base = S5P_VA_DMC1;
        data->pm_notifier.notifier_call = exynos4_busfreq_pm_notifier_event;
        data->dev = dev;
+
+       /* Parse dt data to get register/regulator */
+       err = exynos4_busfreq_parse_dt(data);
+       if (err < 0) {
+               dev_err(dev, "Failed to parse dt for resource\n");
+               return err;
+       }
+
        mutex_init(&data->lock);
 
        switch (data->type) {
@@ -1102,12 +1103,20 @@ static int exynos4_busfreq_probe(struct platform_device 
*pdev)
 
        platform_set_drvdata(pdev, data);
 
-       busfreq_mon_reset(data);
-
+       /* Reigster Exynos4's devfreq instance with 'simple_ondemand' gov */
        data->devfreq = devfreq_add_device(dev, &exynos4_devfreq_profile,
                                           "simple_ondemand", NULL);
-       if (IS_ERR(data->devfreq))
-               return PTR_ERR(data->devfreq);
+       if (IS_ERR(data->devfreq)) {
+               dev_err(dev, "Failed to add devfreq device\n");
+               err = PTR_ERR(data->devfreq);
+               goto err_devfreq;
+       }
+
+       /*
+        * Start PPMU(Performance Profiling Monitoring Unit) to check
+        * utilization of each IP in the Exynos4 SoC.
+        */
+       busfreq_mon_reset(data);
 
        /* Register opp_notifier for Exynos4 busfreq */
        err = devfreq_register_opp_notifier(dev, data->devfreq);
@@ -1128,9 +1137,22 @@ static int exynos4_busfreq_probe(struct platform_device 
*pdev)
 err_notifier_pm:
        devfreq_unregister_opp_notifier(dev, data->devfreq);
 err_notifier_opp:
+       /*
+        * The devfreq_remove_device() would execute finally devfreq->profile
+        * ->exit(). To avoid duplicate resource free operation, return directly
+        * before executing resource free below 'err_devfreq' goto statement.
+        */
        devfreq_remove_device(data->devfreq);
 
        return err;
+
+err_devfreq:
+       for (i = 0; i < PPMU_END; i++) {
+               if (data->ppmu[i].hw_base)
+                       iounmap(data->ppmu[i].hw_base);
+       }
+
+       return err;
 }
 
 static int exynos4_busfreq_remove(struct platform_device *pdev)
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to