On 05/03/14 17:35, Alexandre Belloni wrote:
num_channels and registers are not used anymore since they are defined inside
the at91_adc driver and assigned by matching the id_table.
Also, remove the mach/at91_adc.h include that is not necessary anymore.
Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
Acked-by: Jonathan Cameron <ji...@kernel.org>
---
arch/arm/mach-at91/at91sam9260_devices.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c
b/arch/arm/mach-at91/at91sam9260_devices.c
index 0a0315920963..a299c50512f0 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -24,7 +24,6 @@
#include <mach/at91sam9260_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
-#include <mach/at91_adc.h>
#include "board.h"
#include "generic.h"
@@ -1321,13 +1320,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = {
},
};
-static struct at91_adc_reg_desc at91_adc_register_g20 = {
- .channel_base = AT91_ADC_CHR(0),
- .drdy_mask = AT91_ADC_DRDY,
- .status_register = AT91_ADC_SR,
- .trigger_register = AT91_ADC_MR,
-};
-
void __init at91_add_device_adc(struct at91_adc_data *data)
{
if (!data)
@@ -1345,9 +1337,7 @@ void __init at91_add_device_adc(struct at91_adc_data
*data)
if (data->use_external_triggers)
at91_set_A_periph(AT91_PIN_PA22, 0);
- data->num_channels = 4;
data->startup_time = 10;
- data->registers = &at91_adc_register_g20;
data->trigger_number = 4;
data->trigger_list = at91_adc_triggers;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
