On Wed, Mar 12, 2014 at 01:00:51PM +0100, Michal Simek wrote:
> Hi Olof,
>
> >> diff --git a/Documentation/devicetree/bindings/arm/zynq/xlnx,zynq-ocm.txt
> >> b/Documentation/devicetree/bindings/arm/zynq/xlnx,zynq-ocm.txt
> >> new file mode 100644
> >> index 0000000..64cb5e8
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/arm/zynq/xlnx,zynq-ocm.txt
> >> @@ -0,0 +1,17 @@
> >> +Device tree bindings for Zynq's OCM
> >> +
> >> +The OCM is divided to 4 64kB segments which can be separately configured
> >> +to low or high location. Location is controlled via SLCR.
> >> +
> >> +Required properties:
> >> + compatible: Compatibility string. Must be "xlnx,zynq-ocm-1.0".
> >> + reg: Specify the base and size of the OCM registers in the memory map.
> >> + E.g.: reg = <0xf800c000 0x1000>;
> >> +
> >> +Example:
> >> +ocmc: ocmc@f800c000 {
> >> + compatible = "xlnx,zynq-ocm-1.0";
> >> + interrupt-parent = <&intc>;
> >> + interrupts = <0 3 4>;
> >> + reg = <0xf800c000 0x1000>;
> >> +} ;
> >> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi
> >> b/arch/arm/boot/dts/zynq-7000.dtsi
> >> index 1d942e2..4929be5 100644
> >> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> >> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> >> @@ -66,6 +66,13 @@
> >> cache-level = <2>;
> >> };
> >>
> >> + ocmc: ocmc@f800c000 {
> >> + compatible = "xlnx,zynq-ocm-1.0";
> >> + interrupt-parent = <&intc>;
> >> + interrupts = <0 3 4>;
> >> + reg = <0xf800c000 0x1000>;
> >> + } ;
> >> +
> >> uart0: uart@e0000000 {
> >> compatible = "xlnx,xuartps";
> >> status = "disabled";
> >> diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
> >> index 323e505..f3e6ce4 100644
> >> --- a/arch/arm/mach-zynq/Kconfig
> >> +++ b/arch/arm/mach-zynq/Kconfig
> >> @@ -15,5 +15,6 @@ config ARCH_ZYNQ
> >> select CADENCE_TTC_TIMER
> >> select ARM_GLOBAL_TIMER
> >> select MFD_SYSCON
> >> + select GENERIC_ALLOCATOR
> >> help
> >> Support for Xilinx Zynq ARM Cortex A9 Platform
> >> diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile
> >> index 1b25d92..626f64b 100644
> >> --- a/arch/arm/mach-zynq/Makefile
> >> +++ b/arch/arm/mach-zynq/Makefile
> >> @@ -3,7 +3,7 @@
> >> #
> >>
> >> # Common support
> >> -obj-y := common.o slcr.o
> >> +obj-y := common.o slcr.o zynq_ocm.o
> >> CFLAGS_REMOVE_hotplug.o =-march=armv6k
> >> CFLAGS_hotplug.o =-Wa,-march=armv7-a -mcpu=cortex-a9
> >> obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
> >> diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
> >> index b097844..953f6a1 100644
> >> --- a/arch/arm/mach-zynq/common.h
> >> +++ b/arch/arm/mach-zynq/common.h
> >> @@ -24,6 +24,7 @@ extern int zynq_early_slcr_init(void);
> >> extern void zynq_slcr_system_reset(void);
> >> extern void zynq_slcr_cpu_stop(int cpu);
> >> extern void zynq_slcr_cpu_start(int cpu);
> >> +extern u32 zynq_slcr_get_ocm_config(void);
> >>
> >> #ifdef CONFIG_SMP
> >> extern void secondary_startup(void);
> >> diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
> >> index c1f1499..9a37ab3 100644
> >> --- a/arch/arm/mach-zynq/slcr.c
> >> +++ b/arch/arm/mach-zynq/slcr.c
> >> @@ -26,6 +26,7 @@
> >> #define SLCR_PS_RST_CTRL_OFFSET 0x200 /* PS Software Reset
> >> Control */
> >> #define SLCR_A9_CPU_RST_CTRL_OFFSET 0x244 /* CPU Software Reset
> >> Control */
> >> #define SLCR_REBOOT_STATUS_OFFSET 0x258 /* PS Reboot Status */
> >> +#define SLCR_OCM_CFG_OFFSET 0x910 /* OCM Address Mapping */
> >>
> >> #define SLCR_UNLOCK_MAGIC 0xDF0D
> >> #define SLCR_A9_CPU_CLKSTOP 0x10
> >> @@ -107,6 +108,20 @@ void zynq_slcr_system_reset(void)
> >> }
> >>
> >> /**
> >> + * zynq_slcr_get_ocm_config - Get SLCR OCM config
> >> + *
> >> + * return: OCM config bits
> >> + */
> >> +u32 zynq_slcr_get_ocm_config(void)
> >> +{
> >> + u32 val;
> >> +
> >> + zynq_slcr_read(&val, SLCR_OCM_CFG_OFFSET);
> >> +
> >> + return val;
> >> +}
> >> +
> >> +/**
> >> * zynq_slcr_cpu_start - Start cpu
> >> * @cpu: cpu number
> >> */
> >> diff --git a/arch/arm/mach-zynq/zynq_ocm.c b/arch/arm/mach-zynq/zynq_ocm.c
> >> new file mode 100644
> >> index 0000000..034a65b
> >> --- /dev/null
> >> +++ b/arch/arm/mach-zynq/zynq_ocm.c
> >> @@ -0,0 +1,243 @@
> >> +/*
> >> + * Copyright (C) 2013 Xilinx
> >> + *
> >> + * Based on "Generic on-chip SRAM allocation driver"
> >
> > We're not adding new drivers under arch/arm, so if you need this
> > driver then you should either merge it under drivers/ somewhere, or
> > look at extending the generic driver in a way that you can reuse it.
>
> Driver is reusing ideas from this generic driver but
> incorporation our changes to will be problematic.
>
> It is a shame that you didn't review the rest of code below.
> The reason why I have added this driver to arch/arm/mach-zynq
> was that there is code connection to zynq SMP bootup trampoline
> which has to be added at 0x0 when OCM is placed at 0x0.
> And this memory can't be used for generic purpose.
> If you see any nice way how to it please let me know.
Rockchip just went through some of the same discussions -- they need to
use onchip SRAM for SMP spin-up. You should look at that patchset and
see if you can solve it in a similar manner, the needs seem to be quite
similar.
-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
