BOARD_NORMAL is completely unused and BOARD_NCR53C400 is used only by
g_NCR5380 internally. Remove the unused definitions.
Signed-off-by: Finn Thain <fth...@telegraphics.com.au>
---
drivers/scsi/arm/cumana_1.c | 3 ---
drivers/scsi/arm/oak.c | 3 ---
drivers/scsi/mac_scsi.h | 3 ---
drivers/scsi/sun3_scsi.h | 3 ---
4 files changed, 12 deletions(-)
Index: linux-m68k/drivers/scsi/arm/cumana_1.c
===================================================================
--- linux-m68k.orig/drivers/scsi/arm/cumana_1.c 2014-03-17 23:49:31.000000000
+1100
+++ linux-m68k/drivers/scsi/arm/cumana_1.c 2014-03-18 00:18:20.000000000
+1100
@@ -36,9 +36,6 @@
void __iomem *base; \
void __iomem *dma
-#define BOARD_NORMAL 0
-#define BOARD_NCR53C400 1
-
#include "../NCR5380.h"
void cumanascsi_setup(char *str, int *ints)
Index: linux-m68k/drivers/scsi/arm/oak.c
===================================================================
--- linux-m68k.orig/drivers/scsi/arm/oak.c 2014-03-17 23:49:31.000000000
+1100
+++ linux-m68k/drivers/scsi/arm/oak.c 2014-03-18 00:18:20.000000000 +1100
@@ -37,9 +37,6 @@
#define NCR5380_implementation_fields \
void __iomem *base
-#define BOARD_NORMAL 0
-#define BOARD_NCR53C400 1
-
#include "../NCR5380.h"
#undef START_DMA_INITIATOR_RECEIVE_REG
Index: linux-m68k/drivers/scsi/mac_scsi.h
===================================================================
--- linux-m68k.orig/drivers/scsi/mac_scsi.h 2014-03-17 23:49:31.000000000
+1100
+++ linux-m68k/drivers/scsi/mac_scsi.h 2014-03-18 00:18:20.000000000 +1100
@@ -75,9 +75,6 @@
#define NCR5380_show_info macscsi_show_info
#define NCR5380_write_info macscsi_write_info
-#define BOARD_NORMAL 0
-#define BOARD_NCR53C400 1
-
#endif /* ndef HOSTS_C */
#endif /* ndef ASM */
#endif /* MAC_NCR5380_H */
Index: linux-m68k/drivers/scsi/sun3_scsi.h
===================================================================
--- linux-m68k.orig/drivers/scsi/sun3_scsi.h 2014-03-17 23:49:31.000000000
+1100
+++ linux-m68k/drivers/scsi/sun3_scsi.h 2014-03-18 00:18:20.000000000 +1100
@@ -108,9 +108,6 @@ static int sun3scsi_release (struct Scsi
#define NCR5380_dma_read_setup(instance, data, count) sun3scsi_dma_setup(data,
count, 0)
#define NCR5380_dma_residual sun3scsi_dma_residual
-#define BOARD_NORMAL 0
-#define BOARD_NCR53C400 1
-
/* additional registers - mainly DMA control regs */
/* these start at regbase + 8 -- directly after the NCR regs */
struct sun3_dma_regs {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
