Switch to the generic leds_pwm driver instead of leds-atmel-pwm. Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com> --- arch/arm/mach-at91/board-sam9m10g45ek.c | 43 ++++++++++++++++++++++++++------- 1 file changed, 34 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index f2f7ce9643ce..a98e92525fdb 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -26,6 +26,8 @@ #include <linux/leds.h> #include <linux/atmel-mci.h> #include <linux/delay.h> +#include <linux/pwm.h> +#include <linux/leds_pwm.h> #include <linux/platform_data/at91_adc.h> @@ -415,7 +417,7 @@ static struct gpio_led ek_leds[] = { .active_low = 1, .default_trigger = "nand-disk", }, -#if !(defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE)) +#if !IS_ENABLED(CONFIG_LEDS_PWM) { /* "right" led, green, userled1, pwm1 */ .name = "d7", .gpio = AT91_PIN_PD31, @@ -429,22 +431,42 @@ static struct gpio_led ek_leds[] = { /* * PWM Leds */ -static struct gpio_led ek_pwm_led[] = { -#if defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE) +static struct pwm_lookup pwm_lookup[] = { + PWM_LOOKUP("at91sam9rl-pwm", 1, "leds_pwm", "d7"), +}; + +#if IS_ENABLED(CONFIG_LEDS_PWM) +static struct led_pwm pwm_leds[] = { { /* "right" led, green, userled1, pwm1 */ - .name = "d7", - .gpio = 1, /* is PWM channel number */ - .active_low = 1, - .default_trigger = "none", + .name = "d7", + .max_brightness = 255, + .pwm_period_ns = 5000, + .active_low = 1, }, -#endif }; +static struct led_pwm_platform_data pwm_data = { + .num_leds = ARRAY_SIZE(pwm_leds), + .leds = pwm_leds, +}; + +static struct platform_device leds_pwm = { + .name = "leds_pwm", + .id = -1, + .dev = { + .platform_data = &pwm_data, + }, +}; +#endif + static struct platform_device *devices[] __initdata = { #if defined(CONFIG_SOC_CAMERA_OV2640) || \ defined(CONFIG_SOC_CAMERA_OV2640_MODULE) &isi_ov2640, #endif +#if IS_ENABLED(CONFIG_LEDS_PWM) + &leds_pwm, +#endif }; static void __init ek_board_init(void) @@ -485,7 +507,10 @@ static void __init ek_board_init(void) at91_add_device_ac97(&ek_ac97_data); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); - at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led)); + pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); +#if IS_ENABLED(CONFIG_LEDS_PWM) + at91_add_device_pwm(1 << AT91_PWM1); +#endif /* Other platform devices */ platform_add_devices(devices, ARRAY_SIZE(devices)); } -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/