On 2014/3/20 16:51, Zheng Li wrote:
> Except bond mode 1, in other bond modes, inactive slaves should keep inactive 
> flag to
> 1 to refuse to receive broadcast packets. Now, active slave send broadcast 
> packets
> (for example ARP requests) which will arrive inactive slaves on same host 
> from switch,
> but inactive slave's inactive flag is zero that cause bridge receive the 
> broadcast
> packets to produce a wrong entry in forward table. Typical situation is domu 
> send some
> ARP request which go out from dom0 bond's active slave, then the ARP 
> broadcast request
> packets go back to inactive slave from switch, because the inactive slave's 
> inactive
> flag is zero, kernel will receive the packets and pass them to bridge, that 
> cause dom0's
> bridge map domu's MAC address to port of bond, bridge should map domu's MAC 
> to port of vif.
> 
> Signed-off-by: Zheng Li <zheng.x...@oracle.com>
> ---
>  drivers/net/bonding/bond_main.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
> index e5628fc..2f73f18 100644
> --- a/drivers/net/bonding/bond_main.c
> +++ b/drivers/net/bonding/bond_main.c
> @@ -3063,7 +3063,7 @@ static int bond_open(struct net_device *bond_dev)
>                               bond_set_slave_inactive_flags(slave,
>                                                             
> BOND_SLAVE_NOTIFY_NOW);
>                       } else {
> -                             bond_set_slave_active_flags(slave,
> +                             bond_set_slave_state(slave, BOND_STATE_ACTIVE,
>                                                           
> BOND_SLAVE_NOTIFY_NOW);

This patch could be applied?

Ding

>                       }
>               }
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to