> > Here we add the necessary device nodes required for successful device
> > probing and Pinctrl setup for the FSM.
> >
> > Acked-by: Srinivas Kandagatla <[email protected]>
> > Acked-by Angus Clark <[email protected]>
> > Signed-off-by: Lee Jones <[email protected]>
> > ---
> > arch/arm/boot/dts/stih416-pinctrl.dtsi | 13 +++++++++++++
> > arch/arm/boot/dts/stih416.dtsi | 13 +++++++++++++
> > arch/arm/boot/dts/stih41x-b2020.dtsi | 1 +
> > arch/arm/boot/dts/stih41x-b2020x.dtsi | 28 ++++++++++++++++++++++++++++
> > 4 files changed, 55 insertions(+)
> > create mode 100644 arch/arm/boot/dts/stih41x-b2020x.dtsi
[...]
> > + soc {
> > + spifsm: spifsm@fe902000 {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > +
> > + status = "okay";
> > +
> > + partition@0 {
> > + label = "Serial Flash 1";
>
> Are you sure you want spaces in the partition label? I suppose MTD can
> probably handle this fine, but it doesn't seem standard, and it may
> prevent you from using the partition name in certain ways. For instance,
> it might make it harder to use with the "ubi.mtd=" module parameter.
>
> But otherwise:
>
> Acked-by: Brian Norris <[email protected]>
Code fixed and Ack applied.
Thanks Brian.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
