On 17/03/14 13:56, Alexandre Belloni wrote:
That include file is now only used by the at91_adc driver, remove it from
include/mach for better driver separation.
Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
Acked-by: Jonathan Cameron <ji...@kernel.org>
---
arch/arm/mach-at91/include/mach/at91_adc.h | 120 -----------------------------
drivers/iio/adc/at91_adc.c | 103 ++++++++++++++++++++++++-
2 files changed, 102 insertions(+), 121 deletions(-)
delete mode 100644 arch/arm/mach-at91/include/mach/at91_adc.h
diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h
b/arch/arm/mach-at91/include/mach/at91_adc.h
deleted file mode 100644
index 7d80396346b2..000000000000
--- a/arch/arm/mach-at91/include/mach/at91_adc.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_adc.h
- *
- * Copyright (C) SAN People
- *
- * Analog-to-Digital Converter (ADC) registers.
- * Based on AT91SAM9260 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ADC_H
-#define AT91_ADC_H
-
-#define AT91_ADC_CR 0x00 /* Control Register */
-#define AT91_ADC_SWRST (1 << 0) /* Software Reset */
-#define AT91_ADC_START (1 << 1) /* Start Conversion */
-
-#define AT91_ADC_MR 0x04 /* Mode Register */
-#define AT91_ADC_TSAMOD (3 << 0) /* ADC mode */
-#define AT91_ADC_TSAMOD_ADC_ONLY_MODE (0 << 0) /*
ADC Mode */
-#define AT91_ADC_TSAMOD_TS_ONLY_MODE (1 << 0) /*
Touch Screen Only Mode */
-#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */
-#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection
*/
-#define AT91_ADC_TRGSEL_TC0 (0 << 1)
-#define AT91_ADC_TRGSEL_TC1 (1 << 1)
-#define AT91_ADC_TRGSEL_TC2 (2 << 1)
-#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1)
-#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */
-#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */
-#define AT91_ADC_PENDET (1 << 6) /* Pen contact
detection enable */
-#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar
Rate Selection */
-#define AT91_ADC_PRESCAL_9G45 (0xff << 8)
-#define AT91_ADC_PRESCAL_(x) ((x) << 8)
-#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up
Time */
-#define AT91_ADC_STARTUP_9G45 (0x7f << 16)
-#define AT91_ADC_STARTUP_9X5 (0xf << 16)
-#define AT91_ADC_STARTUP_(x) ((x) << 16)
-#define AT91_ADC_SHTIM (0xf << 24) /* Sample &
Hold Time */
-#define AT91_ADC_SHTIM_(x) ((x) << 24)
-#define AT91_ADC_PENDBC (0x0f << 28) /* Pen
Debounce time */
-#define AT91_ADC_PENDBC_(x) ((x) << 28)
-
-#define AT91_ADC_TSR 0x0C
-#define AT91_ADC_TSR_SHTIM (0xf << 24) /* Sample &
Hold Time */
-#define AT91_ADC_TSR_SHTIM_(x) ((x) << 24)
-
-#define AT91_ADC_CHER 0x10 /* Channel Enable Register */
-#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */
-#define AT91_ADC_CHSR 0x18 /* Channel Status Register */
-#define AT91_ADC_CH(n) (1 << (n)) /* Channel
Number */
-
-#define AT91_ADC_SR 0x1C /* Status Register */
-#define AT91_ADC_EOC(n) (1 << (n)) /* End of
Conversion on Channel N */
-#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun
Error on Channel N */
-#define AT91_ADC_DRDY (1 << 16) /* Data Ready */
-#define AT91_ADC_GOVRE (1 << 17) /* General Overrun
Error */
-#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */
-#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */
-
-#define AT91_ADC_SR_9X5 0x30 /* Status Register for
9x5 */
-#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */
-
-#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register
*/
-#define AT91_ADC_LDATA (0x3ff)
-
-#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */
-#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */
-#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */
-#define AT91RL_ADC_IER_PEN (1 << 20)
-#define AT91RL_ADC_IER_NOPEN (1 << 21)
-#define AT91_ADC_IER_PEN (1 << 29)
-#define AT91_ADC_IER_NOPEN (1 << 30)
-#define AT91_ADC_IER_XRDY (1 << 20)
-#define AT91_ADC_IER_YRDY (1 << 21)
-#define AT91_ADC_IER_PRDY (1 << 22)
-#define AT91_ADC_ISR_PENS (1 << 31)
-
-#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data
Register N */
-#define AT91_ADC_DATA (0x3ff)
-
-#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data
Register 0 for 9X5 */
-
-#define AT91_ADC_ACR 0x94 /* Analog Control Register */
-#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up
resistor */
-
-#define AT91_ADC_TSMR 0xB0
-#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode
*/
-#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0)
-#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0)
-#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0)
-#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0)
-#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */
-#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4)
-#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch
closure time */
-#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen
Debounce time */
-#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28)
-#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA
*/
-#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen
contact detection disable */
-#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen
contact detection enable */
-
-#define AT91_ADC_TSXPOSR 0xB4
-#define AT91_ADC_TSYPOSR 0xB8
-#define AT91_ADC_TSPRESSR 0xBC
-
-#define AT91_ADC_TRGR_9260 AT91_ADC_MR
-#define AT91_ADC_TRGR_9G45 0x08
-#define AT91_ADC_TRGR_9X5 0xC0
-
-/* Trigger Register bit field */
-#define AT91_ADC_TRGR_TRGPER (0xffff << 16)
-#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16)
-#define AT91_ADC_TRGR_TRGMOD (0x7 << 0)
-#define AT91_ADC_TRGR_NONE (0 << 0)
-#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0)
-
-#endif
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index c0e4206e34e5..a51b8badbf8e 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -31,7 +31,108 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
-#include <mach/at91_adc.h>
+/* Registers */
+#define AT91_ADC_CR 0x00 /* Control Register */
+#define AT91_ADC_SWRST (1 << 0) /* Software Reset */
+#define AT91_ADC_START (1 << 1) /* Start Conversion */
+
+#define AT91_ADC_MR 0x04 /* Mode Register */
+#define AT91_ADC_TSAMOD (3 << 0) /* ADC mode */
+#define AT91_ADC_TSAMOD_ADC_ONLY_MODE (0 << 0) /*
ADC Mode */
+#define AT91_ADC_TSAMOD_TS_ONLY_MODE (1 << 0) /*
Touch Screen Only Mode */
+#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */
+#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection
*/
+#define AT91_ADC_TRGSEL_TC0 (0 << 1)
+#define AT91_ADC_TRGSEL_TC1 (1 << 1)
+#define AT91_ADC_TRGSEL_TC2 (2 << 1)
+#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1)
+#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */
+#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */
+#define AT91_ADC_PENDET (1 << 6) /* Pen contact
detection enable */
+#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar
Rate Selection */
+#define AT91_ADC_PRESCAL_9G45 (0xff << 8)
+#define AT91_ADC_PRESCAL_(x) ((x) << 8)
+#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up
Time */
+#define AT91_ADC_STARTUP_9G45 (0x7f << 16)
+#define AT91_ADC_STARTUP_9X5 (0xf << 16)
+#define AT91_ADC_STARTUP_(x) ((x) << 16)
+#define AT91_ADC_SHTIM (0xf << 24) /* Sample &
Hold Time */
+#define AT91_ADC_SHTIM_(x) ((x) << 24)
+#define AT91_ADC_PENDBC (0x0f << 28) /* Pen
Debounce time */
+#define AT91_ADC_PENDBC_(x) ((x) << 28)
+
+#define AT91_ADC_TSR 0x0C
+#define AT91_ADC_TSR_SHTIM (0xf << 24) /* Sample &
Hold Time */
+#define AT91_ADC_TSR_SHTIM_(x) ((x) << 24)
+
+#define AT91_ADC_CHER 0x10 /* Channel Enable Register */
+#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */
+#define AT91_ADC_CHSR 0x18 /* Channel Status Register */
+#define AT91_ADC_CH(n) (1 << (n)) /* Channel
Number */
+
+#define AT91_ADC_SR 0x1C /* Status Register */
+#define AT91_ADC_EOC(n) (1 << (n)) /* End of
Conversion on Channel N */
+#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun
Error on Channel N */
+#define AT91_ADC_DRDY (1 << 16) /* Data Ready */
+#define AT91_ADC_GOVRE (1 << 17) /* General Overrun
Error */
+#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */
+#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */
+
+#define AT91_ADC_SR_9X5 0x30 /* Status Register for
9x5 */
+#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */
+
+#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register
*/
+#define AT91_ADC_LDATA (0x3ff)
+
+#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */
+#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */
+#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */
+#define AT91RL_ADC_IER_PEN (1 << 20)
+#define AT91RL_ADC_IER_NOPEN (1 << 21)
+#define AT91_ADC_IER_PEN (1 << 29)
+#define AT91_ADC_IER_NOPEN (1 << 30)
+#define AT91_ADC_IER_XRDY (1 << 20)
+#define AT91_ADC_IER_YRDY (1 << 21)
+#define AT91_ADC_IER_PRDY (1 << 22)
+#define AT91_ADC_ISR_PENS (1 << 31)
+
+#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data
Register N */
+#define AT91_ADC_DATA (0x3ff)
+
+#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data
Register 0 for 9X5 */
+
+#define AT91_ADC_ACR 0x94 /* Analog Control Register */
+#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up
resistor */
+
+#define AT91_ADC_TSMR 0xB0
+#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode
*/
+#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0)
+#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0)
+#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0)
+#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0)
+#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */
+#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4)
+#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch
closure time */
+#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen
Debounce time */
+#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28)
+#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA
*/
+#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen
contact detection disable */
+#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen
contact detection enable */
+
+#define AT91_ADC_TSXPOSR 0xB4
+#define AT91_ADC_TSYPOSR 0xB8
+#define AT91_ADC_TSPRESSR 0xBC
+
+#define AT91_ADC_TRGR_9260 AT91_ADC_MR
+#define AT91_ADC_TRGR_9G45 0x08
+#define AT91_ADC_TRGR_9X5 0xC0
+
+/* Trigger Register bit field */
+#define AT91_ADC_TRGR_TRGPER (0xffff << 16)
+#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16)
+#define AT91_ADC_TRGR_TRGMOD (0x7 << 0)
+#define AT91_ADC_TRGR_NONE (0 << 0)
+#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0)
#define AT91_ADC_CHAN(st, ch) \
(st->registers->channel_base + (ch * 4))
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
