* Feng Tang <feng.t...@intel.com> wrote: > On Tue, Apr 15, 2014 at 11:00:25AM +0200, Ingo Molnar wrote: > > > > * Feng Tang <feng.t...@intel.com> wrote: > > > > > Hi Ingo, > > > > > > On Fri, Mar 28, 2014 at 09:11:17AM +0100, Ingo Molnar wrote: > > > > > > > > * Clemens Ladisch <clem...@ladisch.de> wrote: > > > > > > > > > Feng Tang wrote: > > > > > > On Fri, Mar 28, 2014 at 08:17:16AM +0100, Ingo Molnar wrote: > > > > > >> * Feng Tang <feng.t...@intel.com> wrote: > > > > > >> - or the kernel should have a quirk to reliably disable it. Why > > > > > >> should we crash or misbehave if a driver is built into the > > > > > >> kernel? > > > > > > > > > > > > I thought about this before, HPET doesn't have PCI ID like stuff, > > > > > > > > > > HPET does have the PCI vendor ID in the first register. > > > > > > > > > > > only thing I can think of to identify them may be the CPU family/ID. > > > > > > > > > > The HPET is implemented by some actual chip, and that chip also has > > > > > lots > > > > > of PCI devices. (In the case of a SoC, the CPU ID would work, too). > > > > > > > > Correct. See arch/x86/kernel/hpet.c, which has a large number of HPET > > > > quirks keyed off chipset PCI IDs: > > > > > > > > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, > > > > PCI_DEVICE_ID_INTEL_ESB2_0, > > > > ich_force_enable_hpet); > > > > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, > > > > PCI_DEVICE_ID_INTEL_ICH6_0, > > > > ich_force_enable_hpet); > > > > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, > > > > PCI_DEVICE_ID_INTEL_ICH6_1, > > > > ich_force_enable_hpet); > > > > [...] > > > > > > I just gave it another thought, that the HPET on our platform > > > currently do have some problem to be used as clocksource/clockevent, > > > but it may get fixed in future version (by Silicon or BIOS). > > > > > > If I add quirk to block it now, I may revert this code in future > > > when it get fixed, same problem applis for the future generation of > > > platform. > > > > If the hardware or BIOS gets fixed then that will be visible in the > > revision level of the hardware, right? > > AFAIK, if it is fixed in a new silicon version, we should be able to > detect it by the "stepping", but the PCI DEV ID is not likely to > change. > > If it is fixed by BIOS or PUNIT FW, then we may go through the DMI > info to check the BIOS version, One problem is there is some > Baytrail tablet platforms that doesn't provide DMI info as its FW is > not UEFI/Legacy BIOS compatible version.
So just turn it off for the current hardware, via PCI ID. When you get a fix, you can turn it back on again by refining the quirk check, for that specific hardware. Thanks, Ingo -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/