Hi Sebastian,
On 18/04/2014 13:23, Sebastian Hesselbarth wrote:
> On 04/18/2014 12:22 PM, Gregory CLEMENT wrote:
>> The Marvell Armada 38x SoCs contain two xHCI host. This commit adds
>> the Device Tree description of those interfaces at the SoC level, and
>> also enables the two USB3 ports on the Armada 385 DB platform and one
>> USB3 port on the Armada 385 RD platforms.
>>
>> Signed-off-by: Gregory CLEMENT <gregory.clem...@free-electrons.com>
>> ---
>>  arch/arm/boot/dts/armada-385-db.dts |  8 ++++++++
>>  arch/arm/boot/dts/armada-385-rd.dts |  4 ++++
>>  arch/arm/boot/dts/armada-38x.dtsi   | 17 +++++++++++++++++
>>  3 files changed, 29 insertions(+)
> [...]
>> diff --git a/arch/arm/boot/dts/armada-38x.dtsi 
>> b/arch/arm/boot/dts/armada-38x.dtsi
>> index a064f59da02d..4f117e66aa1a 100644
>> --- a/arch/arm/boot/dts/armada-38x.dtsi
>> +++ b/arch/arm/boot/dts/armada-38x.dtsi
>> @@ -355,6 +355,23 @@
>>                              clocks = <&coredivclk 0>;
>>                              status = "disabled";
>>                      };
>> +
>> +                    usb3@f0000 {
>> +                            compatible = "marvell,xhci-armada-380";
>> +                            reg = <0xf0000 0x3fff>,<0xf4000 0x3fff>;
>> +                            interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
>> +                            clocks = <&gateclk 9>;
> 
> Using generic PHY framework will allow you to reference the PHY nodes
> with "usb-phy" here.
> 
> BTW, you added a "marvell,armada-380-usb-utmi" in the patch for PHY init
> but I can see no corresponding node added.

Yes a commit was lost during one of my rebase!
Thanks to git reflog, I found it.
Thanks,

Gregory


> 
> Sebastian
> 
>> +                            status = "disabled";
>> +                    };
>> +
>> +                    usb3@f8000 {
>> +                            compatible = "marvell,xhci-armada-380";
>> +                            reg = <0xf8000 0x3fff>,<0xfc000 0x3fff>;
>> +                            interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
>> +                            clocks = <&gateclk 10>;
>> +                            status = "disabled";
>> +                    };
>> +
>>              };
>>      };
>>  
>>
> 


-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to