The BG2Q has an AHCI SATA controller. Add the corresponding node
in its device tree.
Signed-off-by: Antoine Ténart <antoine.ten...@free-electrons.com>
---
arch/arm/boot/dts/berlin2q.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 07452a7483fa..8e58aae73365 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -183,6 +183,18 @@
};
};
+ ahci: sata@e90000 {
+ compatible = "marvell,berlin-ahci";
+ reg = <0xe90000 0x10000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disable";
+ };
+
+ generic-regs@ea0110 {
+ compatible = "marvell,berlin-generic-regs", "syscon";
+ reg = <0xea0110 0x10>;
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
