Le mercredi 16 avril 2014 à 16:03 +0800, Shawn Guo a écrit : > On Mon, Apr 14, 2014 at 11:08:16AM +0200, Hubert Chaumette wrote: > > - Adds support for ksz9031 PAD skew configuration over devicetree > > - Removes hard-coded pad skew configuration for imx6q-sabrelite, now > > redundant > > with arch/arm/boot/dts/imx6qdl-sabrelite.dtsi > > > > Tested on congatec conga-QEVAL board with conga-QMX6 module. > > > > This patch is based on Anatolij Gustschin's patch from > > http://www.spinics.net/lists/arm-kernel/msg319771.html > > > > Signed-off-by: Hubert Chaumette <hchaume...@adeneo-embedded.com> > > --- > > arch/arm/mach-imx/mach-imx6q.c | 45 ---------- > > drivers/net/phy/micrel.c | 185 > > ++++++++++++++++++++++++++++++++++++++++- > > You should probably leave mach-imx6q.c unchanged, because dropping the > phy fix-up from there may break old DTBs. And the changes on micrel.c > should be submitted to net maintainer. > > Shawn
I've re-sent it without the changes to mach-imx6q.c. Thanks for your review. Regards, Hubert -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
