Alexandre,

On Wed, Apr 23, 2014 at 04:01:06PM +0200, Alexandre Belloni wrote:
> Add sdio clocks to the berlin2cd.dtsi
> Also reorder the PLLs nodes by address
> 
> Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
> ---
>  arch/arm/boot/dts/berlin2cd.dtsi | 42 
> ++++++++++++++++++++++++++--------------
>  1 file changed, 28 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/berlin2cd.dtsi 
> b/arch/arm/boot/dts/berlin2cd.dtsi
> index bd4e9dd4867e..9b3faeee0728 100644
> --- a/arch/arm/boot/dts/berlin2cd.dtsi
> +++ b/arch/arm/boot/dts/berlin2cd.dtsi
> @@ -79,20 +79,6 @@
>                       clocks = <&twdclk>;
>               };
>  
> -             syspll: syspll@ea0014 {
> -                     compatible = "marvell,berlin2-pll";
> -                     clocks = <&smclk>;
> -                     #clock-cells = <0>;
> -                     reg = <0xf7ea0014 8>;
> -             };
> -
> -             cpupll: cpupll@ea003c {
> -                     compatible = "marvell,berlin2-pll";
> -                     clocks = <&smclk>;
> -                     #clock-cells = <0>;
> -                     reg = <0xf7ea003c 8>;
> -             };
> -
>               apb@e80000 {
>                       compatible = "simple-bus";
>                       #address-cells = <1>;
> @@ -183,6 +169,34 @@
>                       };
>               };
>  
> +             syspll: syspll@ea0014 {
> +                     compatible = "marvell,berlin2-pll";
> +                     clocks = <&smclk>;
> +                     #clock-cells = <0>;
> +                     reg = <0xf7ea0014 8>;

You can drop the 'f7' here

> +             };
> +
> +             cpupll: cpupll@ea003c {
> +                     compatible = "marvell,berlin2-pll";
> +                     clocks = <&smclk>;
> +                     #clock-cells = <0>;
> +                     reg = <0xf7ea003c 8>;

and here.

Thanks!

Antoine

> +             };
> +
> +             sdio0xinclk: sdio0xinclk@ea023c {
> +                     compatible = "marvell,berlin-clk";
> +                     clocks = <&syspll>;
> +                     #clock-cells = <0>;
> +                     reg = <0xea023c 4>;
> +             };
> +
> +             sdio1xinclk: sdio1xinclk@ea0240 {
> +                     compatible = "marvell,berlin-clk";
> +                     clocks = <&syspll>;
> +                     #clock-cells = <0>;
> +                     reg = <0xea0240 4>;
> +             };
> +
>               apb@fc0000 {
>                       compatible = "simple-bus";
>                       #address-cells = <1>;
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Antoine Ténart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to