On 4/14/14, Tushar Behera <tushar.beh...@linaro.org> wrote:
> Currently the threshold limits are updated in 2 stages, once for all
> software trigger levels and again for hardware trip point.
I guess the first stage is bootloader as could not find this in this file.
Anyways the changes looks fine to me.

Acked-by: Amit Daniel Kachhap <amit.dan...@samsung.com>

>
> While updating the software trigger levels, it overwrites the threshold
> limit for hardware trip point thereby forcing the Exynos core to issue
> an emergency shutdown.
>
> Updating only the required fields in threshold register fixes this issue.
>
> Signed-off-by: Tushar Behera <tushar.beh...@linaro.org>
> ---
> Based on v3.15-rc1.
>
>  drivers/thermal/samsung/exynos_tmu.c |    4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/drivers/thermal/samsung/exynos_tmu.c
> b/drivers/thermal/samsung/exynos_tmu.c
> index 0d96a51..ffccc89 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -225,6 +225,8 @@ skip_calib_data:
>                       trigger_levs++;
>       }
>
> +     rising_threshold = readl(data->base + reg->threshold_th0);
> +
>       if (data->soc == SOC_ARCH_EXYNOS4210) {
>               /* Write temperature code for threshold */
>               threshold_code = temp_to_code(data, pdata->threshold);
> @@ -249,6 +251,7 @@ skip_calib_data:
>                               ret = threshold_code;
>                               goto out;
>                       }
> +                     rising_threshold &= ~(0xff << 8 * i);
>                       rising_threshold |= threshold_code << 8 * i;
>                       if (pdata->threshold_falling) {
>                               threshold_code = temp_to_code(data,
> @@ -281,6 +284,7 @@ skip_calib_data:
>                       }
>                       if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
>                               /* 1-4 level to be assigned in th0 reg */
> +                             rising_threshold &= ~(0xff << 8 * i);
>                               rising_threshold |= threshold_code << 8 * i;
>                               writel(rising_threshold,
>                                       data->base + reg->threshold_th0);
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc"
> in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to