At Sat, 19 Feb 2005 13:11:57 +0100, [EMAIL PROTECTED] wrote: > > Hello > > I have read a post in lkml.org that states that the problem experienced in > rc3 has gone (1). That is not the case for me. > > My audio device is > > 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) > Subsystem: IBM: Unknown device 0554 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 11 > Region 0: I/O ports at 1c00 [size=256] > Region 1: I/O ports at 18c0 [size=64] > Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512] > Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > In 2.6.10 and in 2.6.11-rc3 & 4 the clock is set to 48khz. > > eg: > > intel8x0_measure_ac97_clock: measured 49502 usecs > intel8x0: clocking to 48000 > > It uses an Analog Devices AD1981B > > I have put a tar file of the /proc/asound directory of 2.6.10 and 2.6.11-rc4 > in > > http://pusa.uv.es/~ulisses/asound-intel8x0/ > > the tar files were done while playing pcm audio, (not being eard in rc4). > > I have found that I had to Mute __both__ "Headphone Jack Sense" and > "Line Jack Sense" in order to ear the audio in rc4.
Yes, that's correct -> Problem solved? The patch to correct these states as default wasn't merged to 2.6.11. Takashi - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/