This driver no longer reads the eeprom to find the board specific data,
all the necessary data is in the boardinfo. Use the boardinfo directly
instead of passing through devpriv->s_EeParameters.
Signed-off-by: Chase Southwood <chase.southw...@gmail.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: H Hartley Sweeten <hswee...@visionengravers.com>
---
Ian and Hartley,
The auto_attach() function is starting to look much better now. My next
patchset
will be geared towards only allocating subdevices which are actually used.
Thanks,
Chase
drivers/staging/comedi/drivers/addi_apci_1564.c | 27 +++++--------------------
1 file changed, 5 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c
b/drivers/staging/comedi/drivers/addi_apci_1564.c
index d5be8d3..b34ae34 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -65,22 +65,6 @@ static int apci1564_auto_attach(struct comedi_device *dev,
dev->iobase = pci_resource_start(pcidev, 2);
devpriv->i_IobaseAmcc = pci_resource_start(pcidev, 1);
- /* Initialize parameters that can be overridden in EEPROM */
- devpriv->s_EeParameters.i_NbrAiChannel = this_board->i_NbrAiChannel;
- devpriv->s_EeParameters.i_NbrAoChannel = this_board->i_NbrAoChannel;
- devpriv->s_EeParameters.i_AiMaxdata = this_board->i_AiMaxdata;
- devpriv->s_EeParameters.i_AoMaxdata = this_board->i_AoMaxdata;
- devpriv->s_EeParameters.i_NbrDiChannel = this_board->i_NbrDiChannel;
- devpriv->s_EeParameters.i_NbrDoChannel = this_board->i_NbrDoChannel;
- devpriv->s_EeParameters.i_DoMaxdata = this_board->i_DoMaxdata;
- devpriv->s_EeParameters.i_Timer = this_board->i_Timer;
- devpriv->s_EeParameters.ui_MinAcquisitiontimeNs =
- this_board->ui_MinAcquisitiontimeNs;
- devpriv->s_EeParameters.ui_MinDelaytimeNs =
- this_board->ui_MinDelaytimeNs;
-
- /* ## */
-
if (pcidev->irq > 0) {
ret = request_irq(pcidev->irq, v_ADDI_Interrupt, IRQF_SHARED,
dev->board_name, dev);
@@ -114,14 +98,13 @@ static int apci1564_auto_attach(struct comedi_device *dev,
/* Allocate and Initialise DO Subdevice Structures */
s = &dev->subdevices[3];
- if (devpriv->s_EeParameters.i_NbrDoChannel) {
+ if (this_board->i_NbrDoChannel) {
s->type = COMEDI_SUBD_DO;
s->subdev_flags =
SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
- s->n_chan = devpriv->s_EeParameters.i_NbrDoChannel;
- s->maxdata = devpriv->s_EeParameters.i_DoMaxdata;
- s->len_chanlist =
- devpriv->s_EeParameters.i_NbrDoChannel;
+ s->n_chan = this_board->i_NbrDoChannel;
+ s->maxdata = this_board->i_DoMaxdata;
+ s->len_chanlist = this_board->i_NbrDoChannel;
s->range_table = &range_digital;
/* insn_config - for digital output memory */
@@ -135,7 +118,7 @@ static int apci1564_auto_attach(struct comedi_device *dev,
/* Allocate and Initialise Timer Subdevice Structures */
s = &dev->subdevices[4];
- if (devpriv->s_EeParameters.i_Timer) {
+ if (this_board->i_Timer) {
s->type = COMEDI_SUBD_TIMER;
s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
s->n_chan = 1;
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
