From: Andi Kleen <a...@linux.intel.com> Signed-off-by: Andi Kleen <a...@linux.intel.com> --- Documentation/x86/fsgs.txt | 73 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 Documentation/x86/fsgs.txt
diff --git a/Documentation/x86/fsgs.txt b/Documentation/x86/fsgs.txt new file mode 100644 index 0000000..0a1755f --- /dev/null +++ b/Documentation/x86/fsgs.txt @@ -0,0 +1,73 @@ + +Using FS and GS prefixes on x86_64-linux + +The x86 architecture supports segment prefixes per instruction to add an +offset to an address. On 64bit x86, these are mostly nops, except for FS +and GS. + +This offers an efficient way to reference a global pointer. + +The compiler has to generate special code to use these base registers, +or they can be accessed with inline assembler. + + mov %gs:offset,%reg + mov %fs:offset,%reg + +FS is used to address the thread local segment (TLS), declared using +__thread. The compiler the automatically generates the correct prefixes and +relocations to access these values. + +FS is normally managed by the runtime code or the threading library. + +GS is freely available, but may need special (compiler or inline assembler) +code to use. + +Traditionally 64bit FS and GS could be set by the arch_prctl system call + + arch_prctl(ARCH_SET_GS, value) + arch_prctl(ARCH_SET_FS, value) + +[There was also an older method using modify_ldt(), inherited from 32bit, +but this is not discussed here.] + +However using a syscall is problematic for user space threading libraries +that want to context switch in user space. + +Newer Intel CPUs (Ivy Bridge and later) added new instructions to directly +access these registers quickly from user context + + RDFSBASE %reg read the FS base (or _readfsbase_u64) + RDGSBASE %reg read the GS base (or _readgsbase_u64) + + WRFSBASE %reg write the FS base (or _writefsbase_u64) + WRGSBASE %reg write the GS base (or _writegsbase_u64) + +The instructions are supported by the CPU when the "fsgsbase" string is shown in +/proc/cpuinfo (or directly retrieved through the CPUID instruction). +The instructions are only available to 64bit binaries. + +However the kernel needs to explicitely enable these instructions, as it +may otherwise not correctly context switch the state. Newer Linux +kernels enable this. When the kernel did not enable the instruction +they will fault. + +An FSGSBASE enabled kernel can be detected by checking the AT_HWCAP2 +bitmask in the aux vector. When the HWCAP2_FSGSBASE bit is set the +kernel supports RDFSGSBASE. + + #include <sys/auxv.h> + #include <elf.h> + + /* Will be eventually in asm/hwcap.h */ + #define HWCAP2_FSGSBASE (1 << 0) + + unsigned val = getauxval(AT_HWCAP2); + if (val & HWCAP2_FSGSBASE) { + asm("wrgsbase %0" :: "r" (ptr)); + } + +Another requirement is that the FS or GS selector has to be zero +(is normally true unless changed explicitely) + + +Andi Kleen -- 1.9.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/