On Friday, May 02, 2014 02:44:43 PM Alan Stern wrote: > On Fri, 2 May 2014, Rafael J. Wysocki wrote: > > > Well, I have a second update. > > > > It has different flag names and changelog (that should explain things better > > hopefully) and the purpose of both flags should be more clear now (patch > > [3/3] > > would need to be reworked on top of this, but for now let's just discuss the > > core changes). > > We've got patch descriptions passing in the night! :-) > > This doesn't contain any changes to the patch itself, apart from the > flag names, right?
There is this change in the patch itself: + if (dev->power.leave_runtime_suspended) + dev->power.parent_needed = false; in __device_suspend() and power.parent_needed is set for all devices in dpm_prepare(). > The description below is much better than the earlier one, but I still feel > this deserves to be split in two: one patch for each new flag. Well, I guess I can introduce power.leave_runtime_suspended for leaf devices first, but that would be somewhat artificial, because in that case some code added by the first patch would be removed by the second one. :-) > > From: Rafael J. Wysocki <rafael.j.wyso...@intel.com> > > Subject: PM / sleep: Flags to speed up suspend-resume of runtime-suspended > > devices > > > > Currently, some subsystems (e.g. PCI and the ACPI PM domain) have to > > resume all runtime-suspended devices during system suspend, mostly > > because those devices may need to be reprogrammed due to different > > wakeup settings for system sleep and for runtime PM. However, at > > least in some cases, that isn't really necessary, because the wakeup > > settings may not be really different. > > > > The idea here is that subsystems should know whether or not it is > > necessary to resume a given device during system suspend as long as > > they know that the device's children will not need it to be functional > > during the late/early and noirq phases of their suspend and resume. > > Perhaps the matter of the children's requirements should be discussed > more fully. I skimmed over it in my suggested description too. > > Under what conditions will a child need the parent device to be > functional? Let's start by assuming the parent's ignore_children > bit isn't set. > > By this assumption, if the child was at full power during the suspend > stages then the parent would have to be at full power too. So let's > assume that the child is in runtime suspend when its ->suspend() > routine runs. I can't think of any scenario where the child's driver > would require the parent to be at full power without also needing the > child to be at full power. If the child really does need to be at full > power then the driver will have to do a runtime resume, which would > also bring the parent to full power. Either way, we don't have to do > anything special -- during the suspend stages, if the child needs the > parent to be at full power then it will be. > > (As a variant of this case, maybe the child belongs to one of the > subsystems like PCI, and its driver expects the subsystem to > runtime-resume the child before invoking its ->suspend() callback. > When the subsystem does this, the parent will automatically be resumed > as well. Again there are no special requirements; the point is moot > because the parent will never be runtime-suspended when its ->suspend() > routine is ready to run.) Yes. > During the resume stages, if the child is going to be restored to full > power then certainly the parent has to be at full power first. > Drivers expect this, so if we're going to leave the parent in runtime > suspend during system resume, we have to get the child driver's > permission first. _That's_ what the parent_needed flag should mean. There is a theoretical case where the child is runtime-suspended, but not actually zero-power, and it doesn't have leave_runtime_suspended set, but its driver doesn't implement ->suspend() at all and instead it waits until ->suspend_late() or even ->suspend_noirq() and then attempts to do something extra to the device. Then, if the parent is a bridge and is required to be functional for accessing the child, we can't leave it runtime-suspended too. I'm not sure how realistic that is, to be honest, but it does look like a valid thing to do to my eyes, so in my opinion we may need to get the child driver's permission to leave the parent in runtime suspend for that reason too. I guess it is fair to simply say that "we need to get the child driver's permission to leave the parent in runtime suspend". > What about the case where ignore_children _is_ set? Then the child's > driver might indeed need the parent to be at full power during system > suspend, since we could start off with the parent suspended and the > child active. > > Putting these arguments together, the result is that during system > suspend we don't care about the children's needs unless the parent's > ignore_children bit is set. But during system resume, we must resume > the parent unless the child's driver says we don't have to. > > As a corollary, if we don't have the child's permission to leave the > parent suspended during system resume then we have to invoke all of the > parent's resume callbacks, which means we also have to invoke all the > suspend callbacks. However, we still might be able to leave the parent > in runtime suspend during the suspend stages. The decision whether or > not to do so should be up to the subsystem or driver, not the PM core; > the subsystem's callback routines can check the device's runtime status > and then do what they want. Yes, but they can do that anyway, can't they? :-) > > To help them with that, introduce two new device PM flags: > > power.parent_needed and power.leave_runtime_suspended supposed to work > > as follows. > > > > The PM core will clear power.leave_runtime_suspended and will set > > power.parent_needed for all devices in dpm_prepare(). Next, the > > subsystem (or driver) of a device that in principle may not need > > to be resumed during system suspend, if runtume-suspended already, > > will set power.leave_runtime_suspended in its ->prepare() callback. > > Also the subsystems (or drivers) of devices whose parents need not > > be resumed during system suspend, if runtime-suspended already, > > are supposed to clear power.parent_needed for them. The PM core > > will then clear power.leave_runtime_suspended for the parents of > > all devices having power.parent_needed set in __device_suspend(). > > You are using leave_runtime_suspended to mean two different things: > remain runtime-suspended during the system suspend stages (i.e., no > reprogramming is needed so don't go to full power), and remain > runtime-suspended during both the system suspend and system resume > stages. Only the first meaning matters if all you want to accomplish > is to avoid unnecessary runtime resumes during system suspend. Well, this is not the case, becase you can't call ->resume_noirq() *after* ->runtime_suspend() for a number of drivers, as they simply may not expect that to happen (that covers all of the PCI drivers and the ACPI PM domain at least). So you can't say "well, I'll skip your ->suspend_late and ->suspend_noirq, but then I'll resume you traditionally" for those drivers, but this isn't about remaining runtime-suspended during system resume too, but about preserving the expected ordering of callbacks for them. So yes, the goal is to "remain runtime-suspended during the system suspend stages", but that *leads* *to* "do not execute system resume callbacks up to and including ->resume()" either at least for an important subset of drivers. > For the first meaning -- and I claim that this is the appropriate > meaning for this patch -- the leave_runtime_suspend flag doesn't depend > on the children's needs, except in the case where the parent's > ignore_children bit is set. In that case, we could simply force the > parent's leave_runtime_suspended flag to be always off. Or we could > leave it set if it is set in all of the parent's children. > > The parent_needed flag is the one that really has to propagate up the > device tree. It doesn't need to be propagated if it is set for everybody to start with which is the case in my last patch. > If this flag is set in a child then the PM core has to > invoke all the suspend and resume callbacks, not just in the child's > parent but in all its ancestors. (Perhaps you could stop if you reach > an ancestor with ignore_children set, but it's safer not to.) > > > Now, if the ->suspend() callback is executed for a device whose > > power.leave_runtime_suspended is set, it can simply return 0 after > > checking the device's state if that state is appropriate for > > system suspend. The PM core will then skip the late/early and > > noirq system suspend/resume callbacks for that device and will > > use pm_runtime_resume() to resume it in device_resume(). > > By the discussion above, the PM core shouldn't skip anything > unless the parent_needed flag is clear. In all of the device's children. > > If the state of a device with power.leave_runtime_suspended is not > > appropriate for system suspend, the ->suspend() callback should > > resume it using pm_runtime_resume() and clear > > power.leave_runtime_suspended for it. > > Oh yes, I forgot to discuss this earlier. We have two choices for > handling this: > > As you wrote above, require drivers not to set > leave_runtime_suspended if the device isn't in an appropriate > state, and propagate the flag up the device tree. (But as > I mentioned, in most cases the flag shouldn't need to be > propagated.) It isn't propageted in my last patch. > Make the PM core automatically clear leave_runtime_suspended > whenever the device is (or becomes) runtime-active. Then > callbacks don't have to check whether the device actually is in > runtime suspend; they just have to check the flag. > > I prefer the second choice, because it is easier for drivers. Well, I'm not sure how much easier that is, because the flag will have to be operated under power.lock then, but that will cause patch [2/3] to be unnecessary, so it's fine by me. :-) > > Note: Drivers (or bus types etc.) can reasonably expect that the > > next PM callback executed after ->runtime_suspend() will be > > ->runtime_resume() rather than ->resume_noirq() or ->resume_early(). > > This change is designed with that expectation in mind. > > Except, of course, that in the current kernel this isn't true. Well, what about PCI devices? Their drivers surely can have such an expectation, because all of the PCI devices *are* resumed today in either pci_pm_prepare() or pci_pm_suspend(), before executing the driver's ->suspend() callback. > And there probably are a few cases where it can't ever be true. It is easy to say things like that without giving any examples. Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
