Hi Maxime,
On Mon, May 5, 2014 at 6:17 AM, Maxime Ripard
<maxime.rip...@free-electrons.com> wrote:
> On Fri, May 02, 2014 at 01:28:26AM +0200, Geert Uytterhoeven wrote:
>> On Fri, May 2, 2014 at 12:36 AM, Maxime Ripard
>> <maxime.rip...@free-electrons.com> wrote:
>> > But it actually doesn't work in a case where you can't really predict
>> > what is on the other side of the bus. Either because, on the board
>> > you're using the pins are exposed and it's pretty much up to the user
>> > to know what to put on it. That could be handled by DT overlays
>> > though.
>> >
>> > What never works is where the device on the other side is so generic
>> > that you really can't tell what it does. Think of a microcontroller
>> > that would behave as a SPI slave. It's behaviour and what it does is
>> > pretty much dependant of what we flashed on it, and suddenly the
>> > compatible string is not the proper reprensentation anymore.
>>
>> So you will (hopefully soon) use overlay DT to change the DTS to match what's
>> connected?
>
> Not really, because you can't declare a spidev device in the DT.
Yes you can. I've done it before.
See also "git grep -w spidev -- arch/arm/*/dts/".
>> And then you want spidev to bind to it. Would it help if DT offered a feature
>> to add a compatible entry to a driver at runtime, cfr.
>> /sys/bus/pci/drivers/.../new_id on PCI?
>
> The thing is, in the core SPI bus, devices are only instiated (in the
> DT case), by parsing the DT. So, to bind a device to a new driver, it
> has to exist in the first place, and it won't exist, because there
> won't be any node in the DT for this device. But since DT is
> unsuitable for such a device, you go back to where we were initially.
So you add a node in the overlay DT? Or what am I missing?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
