On Mon, May 05, 2014 at 12:41:26PM -0700, Tony Lindgren wrote: > * Sebastian Reichel <s...@kernel.org> [140425 16:56]: > > Add common DT binding documentation for touchscreen devices and > > implement input_parse_touchscreen_of_params, which parses the common > > properties and configures the input device accordingly. > > > > The method currently does not interpret the axis inversion properties, > > since there is no matching flag in the generic linux input device. > > > > Signed-off-by: Sebastian Reichel <s...@kernel.org> > > --- > > .../bindings/input/touchscreen/touchscreen.txt | 27 +++++++++++++++++ > > drivers/input/input.c | 34 > > ++++++++++++++++++++++ > > include/linux/input.h | 8 +++++ > > 3 files changed, 69 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt > > > > diff --git > > a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt > > b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt > > new file mode 100644 > > index 0000000..d8e0616 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt > > @@ -0,0 +1,27 @@ > > +General Touchscreen Properties: > > + > > +Optional properties for Touchscreens: > > + - touchscreen-size-x : horizontal resolution of touchscreen > > + (in pixels) > > + - touchscreen-size-y : vertical resolution of touchscreen > > + (in pixels) > > + - touchscreen-max-pressure : maximum reported pressure (arbitrary > > range > > + dependent on the controller) > > + - touchscreen-fuzz-x : horizontal noise value of the > > absolute input > > + device (in pixels) > > + - touchscreen-fuzz-y : vertical noise value of the absolute > > input > > + device (in pixels) > > + - touchscreen-fuzz-pressure : pressure noise value of the absolute > > input > > + device (arbitrary range dependent on the > > + controller)
Fuzz seems like linux-specific property, not generic one. > > + - touchscreen-inverted-x : X axis is inverted (boolean) > > + - touchscreen-inverted-y : Y axis is inverted (boolean) > > We probably also need something to swap x and y depending on the > display orientation in addition to the touchscreen-inverted-x and y. > Just swapping x and y is not enough depending if we rotate by 270 > degrees instead of 90 degrees. > > Naturally that part can be added later. So far we've been relying on upper layers (such as tslib) to perform such transformations rather than re-implementing it in every driver. Are we saying that we need to implement this in input core? Thanks. -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/