Hi Dmitry, David,
I need acks or reviews from power supply subsystem maintainers for patches: - 1/6: charger: max14577: Add support for MAX77836 charger - 3/6: charger: max14577: Configure battery-dependent settings from DTS - 4/6: power: max17040: Add ID for MAX77836 Fuel Gauge block These patches were published for the first time around February 2014. Could you look at them? Best regards, Krzysztof On śro, 2014-04-23 at 16:50 +0200, Krzysztof Kozlowski wrote: > Hi, > > > This is second part of patches adding support for MAX77836 device > to the max14577 drivers. > > The first part [1] was applied by Lee Jones [2][3] and this patchset *depends* > on it. > > This patchset changes the max14577 charger and regulator drivers > and documents Device Tree bindings. > > The patches 1 to 3 depends on each other so they should be pulled at once. > Patches 4, 5 and 6 can be applied independently. However still the > smoothest way to apply this would be through one tree after obtaining > necessary acks from maintainers. > > I need acks from power (patches: 1, 3, 4) and regulator (patch 5) trees. > > > Changes since v4 (for this second part only) > ============================================ > 1. Updated Kconfig entries mentioning MAX77836. > 2. Added patch 5/6 (regulator: max14577: Implement SUSPEND mode for > MAX77836 LDO-s) > 3. Charger: Require a charger subnode in DTS with charger settings. > Previously the charger driver didn't use any properties from DTS. > Now it needs a subnode with settings because it supports different > devices with different charging characteristics. > 4. Rebased on 3.15-rc2. > > Changes since v3 > ================ > 1. Applied minor fixes (pointed by Lee Jones). > 2. Added one ACK (Lee Jones) and Review-by (Tomasz Figa). > 3. Patch 14/charger: Minor change in parsing EOC value from DTS. > 4. Rebased on next-20140224. > > Changes since v2 > ================ > 1. Added ACK-s. > 2. Applied minor checkpatch fixes (pointed by Lee Jones). > 3. Rebased on next-20140217. > > Changes since v1 > ================ > 1. Added ACK-s, reviews and tested-by tags. > 2. Removed applied patches (they were merged to the linux-next tree). > 3. Applied comments from review (Lee Jones) to 5/15 (detection of device type) > and 8/15 (add max77836 support to max14577). > 4. Rebased on next tree. > 5. Added patch 13 and 14 (pointed by Jenny Tc): > - regulator/mfd: max14577: Export symbols for calculating charger current > - charger: max14577: Configure battery-dependent settings from DTS > 6. Updated bindings documentation with new charger bindings. > > > References > ========== > [1] http://thread.gmane.org/gmane.linux.kernel/1682503 > [2] http://www.spinics.net/lists/kernel/msg1728274.html > [3] > https://git.kernel.org/cgit/linux/kernel/git/lee/mfd.git/log/?h=ib-mfd-extcon-3.16 > > Previous, full v4 patchset can be found here: > http://thread.gmane.org/gmane.linux.kernel/1654267 > > > Best regards, > Krzysztof Kozlowski > > > Krzysztof Kozlowski (6): > charger: max14577: Add support for MAX77836 charger > regulator/mfd: max14577: Export symbols for calculating charger > current > charger: max14577: Configure battery-dependent settings from DTS > power: max17040: Add ID for MAX77836 Fuel Gauge block > regulator: max14577: Implement SUSPEND mode for MAX77836 LDO-s > devicetree: mfd: max14577: Add device tree bindings document > > Documentation/devicetree/bindings/mfd/max14577.txt | 152 +++++++++++ > drivers/mfd/max14577.c | 100 ++++++- > drivers/power/Kconfig | 4 +- > drivers/power/max14577_charger.c | 291 > ++++++++++++++++++--- > drivers/power/max17040_battery.c | 1 + > drivers/regulator/max14577.c | 139 +++++----- > include/linux/mfd/max14577-private.h | 92 +++++-- > include/linux/mfd/max14577.h | 31 +++ > 8 files changed, 673 insertions(+), 137 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
