Performance data for different FAULT_AROUND_ORDER values from 4 socket
Power7 system (128 Threads and 128GB memory). perf stat with repeat of 5
is used to get the stddev values. Test ran in v3.14 kernel (Baseline) and
v3.15-rc1 for different fault around order values. %change here is calculated
in this method ((new value - baseline)/baseline). And negative %change says
its a drop in time.
FAULT_AROUND_ORDER Baseline 1 3 4
5 8
Linux build (make -j64)
minor-faults 47,437,359 35,279,286 25,425,347
23,461,275 22,002,189 21,435,836
times in seconds 347.302528420 344.061588460 340.974022391
348.193508116 348.673900158 350.986543618
stddev for time ( +- 1.50% ) ( +- 0.73% ) ( +- 1.13% ) ( +-
1.01% ) ( +- 1.89% ) ( +- 1.55% )
%chg time to baseline -0.9% -1.8% 0.2%
0.39% 1.06%
Linux rebuild (make -j64)
minor-faults 941,552 718,319 486,625 440,124
410,510 397,416
times in seconds 30.569834718 31.219637539 31.319370649
31.434285472 31.972367174 31.443043580
stddev for time ( +- 1.07% ) ( +- 0.13% ) ( +- 0.43% ) ( +-
0.18% ) ( +- 0.95% ) ( +- 0.58% )
%chg time to baseline 2.1% 2.4% 2.8%
4.58% 2.85%
Binutils build (make all -j64 )
minor-faults 474,821 371,380 269,463 247,715
235,255 228,337
times in seconds 53.882492432 53.584289348 53.882773216
53.755816431 53.607824348 53.423759642
stddev for time ( +- 0.08% ) ( +- 0.56% ) ( +- 0.17% ) ( +-
0.11% ) ( +- 0.60% ) ( +- 0.69% )
%chg time to baseline -0.55% 0.0% -0.23%
-0.51% -0.85%
Two synthetic tests: access every word in file in sequential/random order.
Sequential access 16GiB file
FAULT_AROUND_ORDER Baseline 1 3 4
5 8
1 thread
minor-faults 263,148 131,166 32,908 16,514
8,260 1,093
times in seconds 53.091138345 53.113191672 53.188776177
53.233017218 53.206841347 53.429979442
stddev for time ( +- 0.06% ) ( +- 0.07% ) ( +- 0.08% ) ( +-
0.09% ) ( +- 0.03% ) ( +- 0.03% )
%chg time to baseline 0.04% 0.18% 0.26%
0.21% 0.63%
8 threads
minor-faults 2,097,267 1,048,753 262,237 131,397
65,621 8,274
times in seconds 55.173790028 54.591880790 54.824623287
54.802162211 54.969680503 54.790387715
stddev for time ( +- 0.78% ) ( +- 0.09% ) ( +- 0.08% ) ( +-
0.07% ) ( +- 0.28% ) ( +- 0.05% )
%chg time to baseline -1.05% -0.63% -0.67%
-0.36% -0.69%
32 threads
minor-faults 8,388,751 4,195,621 1,049,664 525,461
262,535 32,924
times in seconds 60.431573046 60.669110744 60.485336388
60.697789706 60.077959564 60.588855032
stddev for time ( +- 0.44% ) ( +- 0.27% ) ( +- 0.46% ) ( +-
0.67% ) ( +- 0.31% ) ( +- 0.49% )
%chg time to baseline 0.39% 0.08% 0.44%
-0.58% 0.25%
64 threads
minor-faults 16,777,409 8,607,527 2,289,766
1,202,264 598,405 67,587
times in seconds 96.932617720 100.675418760 102.109880836
103.881733383 102.580199555 105.751194041
stddev for time ( +- 1.39% ) ( +- 1.06% ) ( +- 0.99% ) ( +-
0.76% ) ( +- 1.65% ) ( +- 1.60% )
%chg time to baseline 3.86% 5.34% 7.16%
5.82% 9.09%
128 threads
minor-faults 33,554,705 17,375,375 4,682,462
2,337,245 1,179,007 134,819
times in seconds 128.766704495 115.659225437 120.353046307
115.291871270 115.450886036 113.991902150
stddev for time ( +- 2.93% ) ( +- 0.30% ) ( +- 2.93% ) ( +-
1.24% ) ( +- 1.03% ) ( +- 0.70% )
%chg time to baseline -10.17% -6.53% -10.46%
-10.34% -11.47%
Random access 1GiB file
FAULT_AROUND_ORDER Baseline 1 3 4
5 8
1 thread
minor-faults 17,155 8,678 2,126 1,097
581 134
times in seconds 51.904430523 51.658017987 51.919270792
51.560531738 52.354431597 51.976469502
stddev for time ( +- 3.19% ) ( +- 1.35% ) ( +- 1.56% ) ( +-
0.91% ) ( +- 1.70% ) ( +- 2.02% )
%chg time to baseline -0.47% 0.02% -0.66%
0.86% 0.13%
8 threads
minor-faults 131,844 70,705 17,457 8,505
4,251 598
times in seconds 58.162813956 54.991706305 54.952675791
55.323057492 54.755587379 53.376722828
stddev for time ( +- 1.44% ) ( +- 0.69% ) ( +- 1.23% ) ( +-
2.78% ) ( +- 1.90% ) ( +- 2.91% )
%chg time to baseline -5.45% -5.52% -4.88%
-5.86% -8.22%
32 threads
minor-faults 524,437 270,760 67,069 33,414
16,641 2,204
times in seconds 69.981777072 76.539570015 79.753578505
76.245943618 77.254258344 79.072596831
stddev for time ( +- 2.81% ) ( +- 1.95% ) ( +- 2.66% ) ( +-
0.99% ) ( +- 2.35% ) ( +- 3.22% )
%chg time to baseline 9.37% 13.96% 8.95%
10.39% 12.98%
64 threads
minor-faults 1,049,117 527,451 134,016 66,638
33,391 4,559
times in seconds 108.024517536 117.575067996 115.322659914
111.943998437 115.049450815 119.218450840
stddev for time ( +- 2.40% ) ( +- 1.77% ) ( +- 1.19% ) ( +-
3.29% ) ( +- 2.32% ) ( +- 1.42% )
%chg time to baseline 8.84% 6.75% 3.62%
6.5% 10.3%
128 threads
minor-faults 2,097,440 1,054,360 267,042 133,328
66,532 8,652
times in seconds 155.055861167 153.059625968 152.449492156
151.024005282 150.844647770 155.954366718
stddev for time ( +- 1.32% ) ( +- 1.14% ) ( +- 1.32% ) ( +-
0.81% ) ( +- 0.75% ) ( +- 0.72% )
%chg time to baseline -1.28% -1.68% -2.59%
-2.71% 0.57%
In case of kernel build, fault around order (fao) value of 1 and 3 wins when
compared to 4 (but bit noisy).
Incase of kernel rebuild, slowdown for fao > 0 is seen. Incase of synthetic
test, there are sporadic agains, but mostly
slowdown. No clear sweet spot fao value that can be suggested for the
ppc64/pseries with the current
performance data. Hence, patch suggest value of zero to the fao.
Worst case scenario: we touch one page every 16M to demonstrate overhead.
Touch only one page in page table in 16GiB file
FAULT_AROUND_ORDER Baseline 1 3 4
5 8
1 thread
minor-faults 1,104 1,090 1,071 1,068
1,065 1,063
times in seconds 0.006583298 0.008531502 0.019733795
0.036033763 0.062300553 0.406857086
stddev for time ( +- 2.79% ) ( +- 2.42% ) ( +- 3.47% ) ( +-
2.81% ) ( +- 2.01% ) ( +- 1.33% )
8 threads
minor-faults 8,279 8,264 8,245 8,243
8,239 8,240
times in seconds 0.044572398 0.057211811 0.107606306
0.205626815 0.381679120 2.647979955
stddev for time ( +- 1.95% ) ( +- 2.98% ) ( +- 1.74% ) ( +-
2.80% ) ( +- 2.01% ) ( +- 1.86% )
32 threads
minor-faults 32,879 32,864 32,849 32,845
32,839 32,843
times in seconds 0.197659343 0.218486087 0.445116407
0.694235883 1.296894038 9.127517045
stddev for time ( +- 3.05% ) ( +- 3.05% ) ( +- 4.33% ) ( +-
3.08% ) ( +- 3.75% ) ( +- 0.56% )
64 threads
minor-faults 65,680 65,664 65,646 65,645
65,640 65,647
times in seconds 0.455537304 0.489688780 0.866490093
1.427393118 2.379628982 17.059295051
stddev for time ( +- 4.01% ) ( +- 4.13% ) ( +- 2.92% ) ( +-
1.68% ) ( +- 1.79% ) ( +- 0.48% )
128 threads
minor-faults 131,279 131,265 131,250 131,245
131,241 131,254
times in seconds 1.026880651 1.095327536 1.721728274
2.808233068 4.662729948 31.732848290
stddev for time ( +- 6.85% ) ( +- 4.09% ) ( +- 1.71% ) ( +-
3.45% ) ( +- 2.40% ) ( +- 0.68% )
Signed-off-by: Madhavan Srinivasan <ma...@linux.vnet.ibm.com>
---
arch/powerpc/platforms/pseries/pseries.h | 2 ++
arch/powerpc/platforms/pseries/setup.c | 5 +++++
2 files changed, 7 insertions(+)
diff --git a/arch/powerpc/platforms/pseries/pseries.h
b/arch/powerpc/platforms/pseries/pseries.h
index 9921953..6e6c993 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -17,6 +17,8 @@ struct device_node;
extern void request_event_sources_irqs(struct device_node *np,
irq_handler_t handler, const char *name);
+extern unsigned int fault_around_order;
+
#include <linux/of.h>
extern void __init fw_hypertas_feature_init(const char *hypertas,
diff --git a/arch/powerpc/platforms/pseries/setup.c
b/arch/powerpc/platforms/pseries/setup.c
index 2db8cc6..4391c3c 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -465,6 +465,11 @@ static void __init pSeries_setup_arch(void)
{
set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);
+ /*
+ * Defaulting to zero since no sweet spot value found in the
performance test.
+ */
+ fault_around_order = 0;
+
/* Discover PIC type and setup ppc_md accordingly */
pseries_discover_pic();
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
