Jeff, I forgot: in dmesg I see the following:
ata_piix: probe of 0000:00:1f.2 failed with error -5 Greg Felix On Fri, 25 Feb 2005 18:02:59 -0700, Greg Felix <[EMAIL PROTECTED]> wrote: > > Jeff Garzik wrote: > > See REPORTING-BUGS for the sort of information you should provide. This > > is a "it doesn't work" report without much more info. > > > > I would suggest doing a "modprobe ata_piix" or "modprobe ahci" > > (depending on ICH7 mode and hardware) and see what happens in 'dmesg'. > > > > Jeff > > Let me try and do this right. > Here's the bug report: > > ICH7 SATA drive not detected. > > I have two new OEM machines that are both ICH7 chipsets. Both > machines give the same vendor and device PCI ids for their storage > controllers. 8086:27df and 8086:27c0. One of the machines' disks is > being detected correctly (sda). The other one is not. I have tried > modprobing both ata_piix and ahci with negative results. It is very > new hardware. There is also a broadcom NIC that is not being > detected, but I don't NEED that to work. (I'll file a bug if requested > of me.) > > keywords: piix, ICH7, SATA, ata_piix, ahci > > I'm running 2.6.11-rc5 in a custom distribution in a ram disk from a > pxe boot. I also have a USB memory device inserted into the machine > being detected as sda for the reports below. > > Here's the output of ver_linux: > Linux (none) 2.6.11-rc5 #1 Fri Feb 25 12:31:16 MST 2005 i686 unknown > unknown GNU/Linux > > Gnu C 18: > mount 2.12p > module-init-tools 3.1 > reiserfsprogs line > reiser4progs line > Dynamic linker (ldd) 2.3.4 > Procps 3.2.3 > Net-tools 1.60 > Kbd 81: > Sh-utils 5.2.1 > Modules Loaded > > /proc/cpuinfo reads: > processor : 0 > vendor_id : GenuineIntel > cpu family : 15 > model : 4 > model name : Genuine Intel(R) CPU 3.20GHz > stepping : 1 > cpu MHz : 3193.334 > cache size : 1024 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 5 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge > mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx > pni monitor ds_cpl cid xtpr > bogomips : 6307.84 > > /proc/modules reads: > ahci 5508 0 - Live 0xe0086000 > nls_cp437 4608 1 - Live 0xe0083000 > msdos 5248 1 - Live 0xe0018000 > fat 27548 1 msdos, Live 0xe008e000 > nls_base 4352 2 nls_cp437,fat, Live 0xe001b000 > sd_mod 11152 2 - Live 0xe0038000 > usb_storage 25216 1 - Live 0xe0065000 > usbhid 21376 0 - Live 0xe0047000 > edd 6496 0 - Live 0xe0007000 > ide_cd 29956 0 - Live 0xe007a000 > cdrom 30112 1 ide_cd, Live 0xe0071000 > ide_disk 11520 0 - Live 0xe0034000 > ata_piix 4228 0 - Live 0xe0031000 > libata 28804 2 ahci,ata_piix, Live 0xe003e000 > piix 6404 0 [permanent], Live 0xe0002000 > generic 2432 0 [permanent], Live 0xe0005000 > ide_core 85676 5 usb_storage,ide_cd,ide_disk,piix,generic, Live 0xe004f000 > ehci_hcd 21000 0 - Live 0xe0011000 > uhci_hcd 22416 0 - Live 0xe000a000 > usbcore 72696 5 usb_storage,usbhid,ehci_hcd,uhci_hcd, Live 0xe001e000 > > /proc/ioports reads: > 0000-001f : dma1 > 0020-0021 : pic1 > 0040-0043 : timer0 > 0050-0053 : timer1 > 0060-006f : keyboard > 0080-008f : dma page reg > 00a0-00a1 : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 01f0-01f7 : ide0 > 03c0-03df : vga+ > 03f6-03f6 : ide0 > 0cf8-0cff : PCI conf1 > 1000-101f : 0000:00:1d.0 > 1000-101f : uhci_hcd > 1020-103f : 0000:00:1d.1 > 1020-103f : uhci_hcd > 1040-105f : 0000:00:1d.2 > 1040-105f : uhci_hcd > 1060-107f : 0000:00:1d.3 > 1060-107f : uhci_hcd > 10a0-10af : 0000:00:1f.1 > 10a0-10a7 : ide0 > 10a8-10af : ide1 > 10b0-10bf : 0000:00:1f.2 > 10c0-10c7 : 0000:00:02.0 > 10d8-10df : 0000:00:1f.2 > 10e0-10e7 : 0000:00:1f.2 > 10f0-10f3 : 0000:00:1f.2 > 10f4-10f7 : 0000:00:1f.2 > > /proc/iomem reads: > 00000000-0009fbff : System RAM > 0009fc00-0009ffff : reserved > 000a0000-000bffff : Video RAM area > 000c0000-000c7fff : Video ROM > 000ca800-000cb7ff : Adapter ROM > 000cb800-000ccfff : Adapter ROM > 000f0000-000fffff : System ROM > 00100000-1f7e27ff : System RAM > 00100000-00210717 : Kernel code > 00210718-0024c37f : Kernel data > 1f7e2800-1fffffff : reserved > d0000000-dfffffff : 0000:00:02.0 > e0400000-e047ffff : 0000:00:02.0 > e0480000-e04bffff : 0000:00:02.0 > e04c0000-e04c3fff : 0000:00:1b.0 > e04c4000-e04c43ff : 0000:00:1d.7 > e04c4000-e04c43ff : ehci_hcd > e04c4400-e04c47ff : 0000:00:1f.2 > e0500000-e07fffff : PCI Bus #3f > e0500000-e050ffff : 0000:3f:00.0 > f0000000-f3ffffff : reserved > fec00000-ffffffff : reserved > > lspci -vvv gives: > 00:00.0 Class 0600: 8086:2770 > Subsystem: 103c:3011 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- > Latency: 0 > Capabilities: [e0] Vendor Specific Information > > 00:02.0 Class 0300: 8086:2772 > Subsystem: 103c:3011 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at e0400000 (32-bit, non-prefetchable) [size=512K] > Region 1: I/O ports at 10c0 [size=8] > Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] > Region 3: Memory at e0480000 (32-bit, non-prefetchable) [size=256K] > Capabilities: [90] Message Signalled Interrupts: 64bit- > Queue=0/0 Enable- > Address: 00000000 Data: 0000 > Capabilities: [d0] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1b.0 Class 0403: 8086:27d8 > Subsystem: 103c:3011 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size 10 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at e04c0000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] Message Signalled Interrupts: 64bit+ > Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express Unknown type IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s <64ns, L1 <1us > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 > Link: Latency L0s <64ns, L1 <1us > Link: ASPM Disabled CommClk- ExtSynch- > Link: Speed unknown, Width x0 > > 00:1c.0 Class 0604: 8086:27d0 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size 10 > Bus: primary=00, secondary=20, subordinate=20, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 > Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s unlimited, L1 unlimited > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 > Link: Latency L0s <1us, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ > Slot: Number 2, PowerLimit 10.000000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > Slot: AttnInd Unknown, PwrInd Unknown, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > Capabilities: [80] Message Signalled Interrupts: 64bit- > Queue=0/0 Enable- > Address: 00000000 Data: 0000 > Capabilities: [90] #0d [0000] > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1c.1 Class 0604: 8086:27d2 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size 10 > Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: e0500000-e07fffff > Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 > Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- > Device: Latency L0s unlimited, L1 unlimited > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2 > Link: Latency L0s <256ns, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ > Slot: Number 3, PowerLimit 10.000000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- > Slot: AttnInd Unknown, PwrInd Unknown, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > Capabilities: [80] Message Signalled Interrupts: 64bit- > Queue=0/0 Enable- > Address: 00000000 Data: 0000 > Capabilities: [90] #0d [0000] > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1d.0 Class 0c03: 8086:27c8 > Subsystem: 103c:3011 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 5 > Region 4: I/O ports at 1000 [size=32] > > 00:1d.1 Class 0c03: 8086:27c9 > Subsystem: 103c:3011 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 10 > Region 4: I/O ports at 1020 [size=32] > > 00:1d.2 Class 0c03: 8086:27ca > Subsystem: 103c:3011 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin C routed to IRQ 11 > Region 4: I/O ports at 1040 [size=32] > > 00:1d.3 Class 0c03: 8086:27cb > Subsystem: 103c:3011 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin D routed to IRQ 11 > Region 4: I/O ports at 1060 [size=32] > > 00:1d.7 Class 0c03: 8086:27cc (prog-if 20) > Subsystem: 103c:3011 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at e04c4000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port > > 00:1e.0 Class 0604: 8086:244e (rev e0) (prog-if 01) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 > Secondary status: 66Mhz- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [50] #0d [0000] > > 00:1f.0 Class 0601: 8086:27b0 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Capabilities: [e0] Vendor Specific Information > > 00:1f.1 Class 0101: 8086:27df (prog-if 8a [Master SecP PriP]) > Subsystem: 103c:3011 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 5 > Region 0: I/O ports at <ignored> > Region 1: I/O ports at <ignored> > Region 2: I/O ports at <ignored> > Region 3: I/O ports at <ignored> > Region 4: I/O ports at 10a0 [size=16] > > 00:1f.2 Class 0101: 8086:27c0 (prog-if 8f [Master SecP SecO PriP PriO]) > Subsystem: 103c:3011 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 5 > Region 0: I/O ports at 10d8 [size=8] > Region 1: I/O ports at 10f0 [size=4] > Region 2: I/O ports at 10e0 [size=8] > Region 3: I/O ports at 10f4 [size=4] > Region 4: I/O ports at 10b0 [size=16] > Region 5: Memory at e04c4400 (32-bit, non-prefetchable) > [disabled] [size=1K] > Capabilities: [80] Message Signalled Interrupts: 64bit- > Queue=0/2 Enable- > Address: 00000000 Data: 0000 > Capabilities: [70] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 3f:00.0 Class 0200: 14e4:1600 > Subsystem: 103c:3011 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr+ Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size 10 > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=64K] > Capabilities: [48] Power Management version 2 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data > Capabilities: [58] Message Signalled Interrupts: 64bit+ > Queue=0/3 Enable- > Address: 0068d809080002c0 Data: 0000 > Capabilities: [d0] Express Endpoint IRQ 0 > Device: Supported: MaxPayload 512 bytes, PhantFunc 0, ExtTag+ > Device: Latency L0s <4us, L1 unlimited > Device: AtnBtn- AtnInd- PwrInd- > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0 > Link: Latency L0s <4us, L1 <64us > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > > /proc/devices reads: > Character devices: > 1 mem > 4 /dev/vc/0 > 4 tty > 5 /dev/tty > 5 /dev/console > 7 vcs > 10 misc > 13 input > 180 usb > > Block devices: > 1 ramdisk > 3 ide0 > 8 sd > 65 sd > 66 sd > 67 sd > 68 sd > 69 sd > 70 sd > 71 sd > 128 sd > 129 sd > 130 sd > 131 sd > 132 sd > 133 sd > 134 sd > 135 sd > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
