Thanks Linus W for reviewing the patches.
On 13/05/14 08:29, Linus Walleij wrote:
On Tue, Apr 29, 2014 at 10:20 AM, <srinivas.kandaga...@linaro.org> wrote:
From: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
Most of the Qcomm SD card controller registers must be updated to the MCLK
domain so subsequent writes to registers will be ignored until 3 clock cycles
have passed.
This patch adds a 3 clock cycle delay required after writing to controller
registers on Qualcomm SOCs. Without this delay all the register writes are not
successfull, resulting in not detecting cards.
Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
Sounds like someone decided to clock the internal state machine
in the MMCI using MCLK instead of PCLK :-(
A bit nasty if this ends up in the fastpath (irq) though. Which it
invariably does, right?
yes, Its going to for Qcom SOC.
+ /*
+ * On QCom SD card controller, registers must be updated to the
+ * MCLK domain so subsequent writes to this register will be ignored
+ * for 3 clk cycles.
+ */
+ if (host->hw_designer == AMBA_VENDOR_QCOM)
+ udelay(1 + ((3 * USEC_PER_SEC)/host->mclk));
Add a new field in vendor data instead, and use DIV_ROUND_UP():
yes, that makes sense..
static struct variant_data variant_qcom = {
.mclk_delayed_writes = true,
(...)
if (host->vendor->mclk_delayed_writes)
udelay(DIV_ROUND_UP((3 * USEC_PER_SEC), host->mclk));
You get the idea.
Got it.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/